EF Logo

Detroit Diesel fault codes

Detroit DD engines report faults through three controllers - the engine (MCM), aftertreatment (ACM) and common powertrain (CPC) - as an SPN and FMI with the Detroit description.

750 codes in 37 families16 stop now, 734 check soon, 0 info

750 Detroit codes - type a code, or a word from the problem.

Covers Trucks, Tractor units.

Where to look

  1. 01Connect a Detroit-capable diagnostic tool to the vehicle diagnostic socket.
  2. 02Read the codes from every controller, not only the MCM, and note which controller…
  3. 03Write down the SPN, the FMI, the description, and whether it is active or only stored…
  4. 04Use the FMI to choose the test.
  5. 05Fix the cause, clear the codes in the tool and test drive the truck, because many…
How to read Detroit fault codes, in full
  1. Connect a Detroit-capable diagnostic tool (Diagnostic Link or a compatible scan tool) to the vehicle diagnostic socket.
  2. Read the codes from every controller, not only the MCM, and note which controller (MCM, ACM or CPC5) holds each one.
  3. Write down the SPN, the FMI, the description, and whether it is active or only stored with a count.
  4. Use the FMI to choose the test: 3, 4 and 5 point to wiring, 0, 1 and 15 to 18 to a real condition, and 9 to a missing message.
  5. Fix the cause, clear the codes in the tool and test drive the truck, because many aftertreatment faults need a drive cycle or regeneration to clear.

How urgent is a Detroit code?

Stop now16 codes
Shut down and fix before working on. Running on risks damage or the machine locks out.
Check soon734 codes
The machine may derate or limit a function. Find the cause before the next shift.
Information0 codes
A reminder or status message. Nothing is failing yet.

Pick your system

Find the part of the machine, then the family your code belongs to.

Code range
The first and last code in the family, as the machine shows them.
Codes
How many codes the family holds; each is explained on its page.
Severity mix
The share of stop, check and info codes. The dot after it is the most urgent one in the family.

Engine sensors and levels23 codes

Cooling system33 codes

Fuel system48 codes

Injectors117 codes

Engine speed and position13 codes

Driver inputs36 codes

Air system54 codes

EGR system43 codes

Engine brake14 codes

Controller faults60 codes

Communication50 codes

Electrical17 codes

Aftertreatment242 codes

Most searched Detroit codes

Quick answers

How do I read Detroit fault codes?

Connect a Detroit-capable diagnostic tool (Diagnostic Link or a compatible scan tool) to the vehicle diagnostic socket. Read the codes from every controller, not only the MCM, and note which controller (MCM, ACM or CPC5) holds each one.

Which Detroit codes mean stop now?

16 of the 750 Detroit codes listed are marked Stop now. Shut down and fix before working on. Running on risks damage or the machine locks out. For example SPN 100 FMI 1, SPN 111 FMI 1, SPN 157 FMI 16, SPN 3246 FMI 0. 734 are Check soon. The machine may derate or limit a function. Find the cause before the next shift.

What should I check first on a Detroit code?

Most Detroit codes here (162 of 750) read as real condition: the sensor reading is valid but outside the allowed range - the problem may be real. First test, as general workshop practice: check the real value with a separate gauge or thermometer before blaming the sensor.

Which Detroit codes are looked up most?

SPN 100 FMI 1 (low engine oil pressure), SPN 111 FMI 1 (coolant level very low), SPN 157 FMI 16 (fuel rail pressure too low), SPN 1231 FMI 9 (acm message not received or has stopped arriving), SPN 2791 FMI 7 (egr valve actuator, fail safe mode, motor on). Each page gives the meaning, the likely causes and the checks.

Sources

Every code was read from these documents and written in our own words.

Other makers

Machine down? Post a request for a replacement machine or a technician; suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.