Kubota error codes
Kubota SVL and SSV loaders show a fault on the meter panel as E: and a number - E:0xx from the machine controller, E:9xxx from the engine and DPF. The engine ECU also reports SPN and FMI codes.
189 codes in 11 families59 stop now, 129 check soon, 1 info
189 Kubota codes - type a code, or a word from the problem.
Covers Track loaders, Skid steers.
Where to look
- 01Watch the meter panel.
- 02Write down the code and which lamp is lit, because several codes often appear together.
- 03Connect Kubota Diagmaster to the diagnostic connector to read active and stored codes…
- 04Fix the cause, clear the code as the operator's manual describes, then restart and…
How to read Kubota error codes, in full
- Watch the meter panel: a warning lamp comes on and the E: code scrolls on the display.
- Write down the code and which lamp is lit, because several codes often appear together.
- Connect Kubota Diagmaster to the diagnostic connector to read active and stored codes and the live sensor values.
- Fix the cause, clear the code as the operator's manual describes, then restart and confirm it does not return.
How urgent is a Kubota code?
- Stop now59 codes
- Shut down and fix before working on. Running on risks damage or the machine locks out.
- Check soon129 codes
- The machine may derate or limit a function. Find the cause before the next shift.
- Information1 code
- A reminder or status message. Nothing is failing yet.
Pick your system
Find the part of the machine, then the family your code belongs to.
- Code range
- The first and last code in the family, as the machine shows them.
- Codes
- How many codes the family holds; each is explained on its page.
- Severity mix
- The share of stop, check and info codes. The dot after it is the most urgent one in the family.
Loader controller (E:0xx)26 codes
DPF regeneration (E:90xx)24 codes
Engine ECU - SPN / FMI codes139 codes
- Exhaust gas temperature sensors and high exhaust temperatureSPN3242-FMI0 – SPN523601-FMI019 codes
- Coolant, intake air temperature, oil pressure and overheatSPN100-FMI1 – E:911815 codes
- Intake air, boost, airflow and throttleSPN102-FMI3 – SPN523582-FMI417 codes
- EGR system and emission warningsE:9113 – SPN523578-FMI29 codes
- Common rail, high-pressure fuel and suction control valveSPN157-FMI0 – E:930420 codes
- Injectors, injector data and crank and cam sensorsSPN636-FMI2 – SPN523605-FMI618 codes
- ECU power, relays, sensor supply and starting aidsSPN168-FMI3 – SPN523544-FMI420 codes
- ECU internal faults, CAN bus and accelerator positionSPN29-FMI3 – SPN523700-FMI1321 codes
Most searched Kubota codes
- E:001CAN communication error
- E:004Hydraulic oil temperature advance warning
- E:005Hydraulic oil temperature reached specified level
- E:008Fuel sensor system error
- E:009Acceleration system error
- E:011Parking brake system error
- E:016Auxiliary hydraulic control error (knob control switch)
- E:021Sensor 5 V power supply short-circuited
- E:023Jump start with a 24 V battery or improper device
- E:024Hydraulic oil temperature sensor error
- E:026CRS CAN communication error
- SPN100-FMI1Engine oil pressure low
- SPN110-FMI0Engine overheat - coolant temperature extremely high
- SPN110-FMI4Coolant temperature sensor - open circuit or short to ground
- SPN157-FMI4Rail pressure sensor - open circuit or short to ground
- SPN636-FMI8Crankshaft position sensor (NE) - open circuit or short to ground
- E:9000DPF regeneration required (low rpm prevents start)
- E:9001DPF regeneration required
- E:9004DPF replacement required
- E:9100Rpm sensor system error
- E:9101Fuel or rail pressure system error
- E:9106Injector system error
- E:9116Engine overheat warning
- E:9118Engine oil pressure system error
- E:9120Fuel filter water warning
- E:9204Differential pressure sensor system error
- E:9214DPF regeneration cycle occurs too often
- E:9302Engine fuel system error (leakage)
Quick answers
How do I read Kubota error codes?
Watch the meter panel: a warning lamp comes on and the E: code scrolls on the display. Write down the code and which lamp is lit, because several codes often appear together.
Which Kubota codes mean stop now?
59 of the 189 Kubota codes listed are marked Stop now. Shut down and fix before working on. Running on risks damage or the machine locks out. For example E:005, E:011, E:023, SPN100-FMI1. 129 are Check soon. The machine may derate or limit a function. Find the cause before the next shift.
What should I check first on a Kubota code?
Most Kubota codes here (30 of 189) read as real condition: the sensor reading is valid but outside the allowed range - the problem may be real. First test, as general workshop practice: check the real value with a separate gauge or thermometer before blaming the sensor.
Which Kubota codes are looked up most?
E:001 (can communication error), E:004 (hydraulic oil temperature advance warning), E:005 (hydraulic oil temperature reached specified level), E:008 (fuel sensor system error), E:009 (acceleration system error). Each page gives the meaning, the likely causes and the checks.
Sources
Every code was read from these documents and written in our own words.
Other makers
Machine down? Post a request for a replacement machine or a technician; suppliers in the UAE contact you.
Post a request