Hyundai excavator error codes
Hyundai excavators and wheel loaders show machine fault codes on the cluster, and engine codes as an SPN and FMI from the engine controller.
231 codes in 18 families33 stop now, 161 check soon, 37 info
231 Hyundai codes - type a code, or a word from the problem.
Covers Excavators, Wheel loaders.
Where to look
- 01Turn the key on and open the fault code or diagnosis menu on the cluster, then choose…
- 02Write down the HCESPN number and the FMI together, since the same HCESPN with a…
- 03Find the component in the family page that matches the number, then follow the checks…
- 04Fix the cause, clear the logged faults from the same menu and recheck that the code…
How to read Hyundai error codes, in full
- Turn the key on and open the fault code or diagnosis menu on the cluster, then choose active faults for the machine controller, engine or TCU.
- Write down the HCESPN number and the FMI together, since the same HCESPN with a different FMI means a different failure of the same part.
- Find the component in the family page that matches the number, then follow the checks for that failure mode.
- Fix the cause, clear the logged faults from the same menu and recheck that the code does not return.
How urgent is a Hyundai code?
- Stop now33 codes
- Shut down and fix before working on. Running on risks damage or the machine locks out.
- Check soon161 codes
- The machine may derate or limit a function. Find the cause before the next shift.
- Information37 codes
- A reminder or status message. Nothing is failing yet.
Pick your system
Find the part of the machine, then the family your code belongs to.
- Code range
- The first and last code in the family, as the machine shows them.
- Codes
- How many codes the family holds; each is explained on its page.
- Severity mix
- The share of stop, check and info codes. The dot after it is the most urgent one in the family.
Machine codes (MCU, HCESPN)82 codes
- Cooling fan, coolant and hydraulic oil temperature circuits101-3 – 318-811 codes
- Boom and bucket lever detent solenoids172-4 – 174-66 codes
- Steering pressure sensors and emergency steering pump relay187-4 – 203-410 codes
- Boom and bucket cylinder pressure sensors204-0 – 205-48 codes
- Brake, parking brake and differential lock pressure sensors503-0 – 558-412 codes
- Fuel level, engine speed and starting aid circuits301-3 – 327-69 codes
- Mode selectors and boom and bucket position sensors346-3 – 729-410 codes
- Battery voltage, hourmeter, buzzer, wiper and heater circuits701-4 – 730-199 codes
- MCU memory and controller communication errors830-12 – 850-27 codes
Excavator pressure sensor codes (HCESPN)40 codes
Transmission TCU codes (hex)109 codes
- TCU shift lever and clutch cut off inputs10 – 227 codes
- TCU temperature and speed sensor inputs3A – 3917 codes
- TCU CAN message and engine signal faults5C – 6914 codes
- TCU clutch valve circuits K1 to KR71 – 8918 codes
- TCU auxiliary output circuitsA1 – 9621 codes
- TCU clutch slippage, torque overload and overtemperatureBA – B914 codes
- TCU power supply, joystick, display and internal faultsD1 – F718 codes
Most searched Hyundai codes
Quick answers
How do I read Hyundai error codes?
Turn the key on and open the fault code or diagnosis menu on the cluster, then choose active faults for the machine controller, engine or TCU. Write down the HCESPN number and the FMI together, since the same HCESPN with a different FMI means a different failure of the same part.
Which Hyundai codes mean stop now?
33 of the 231 Hyundai codes listed are marked Stop now. Shut down and fix before working on. Running on risks damage or the machine locks out. For example 830-12, B1, B2, F2. 161 are Check soon. The machine may derate or limit a function. Find the cause before the next shift.
What should I check first on a Hyundai code?
Most Hyundai codes here (74 of 231) read as shorted low: the signal sits at or near zero volts - less than a working sensor can send. First test, as general workshop practice: key off, unplug both ends. Measure resistance from the signal wire to ground and to the machine frame.
Which Hyundai codes are looked up most?
F6 (tcu clutch adjustment data lost), 101-3 (hydraulic oil temperature sensor circuit voltage above normal), 301-3 (fuel level sensor circuit voltage above normal), 705-1 (battery voltage low), 707-1 (alternator node i voltage low or open circuit). Each page gives the meaning, the likely causes and the checks.
Sources
Every code was read from these documents and written in our own words.
Other makers
Machine down? Post a request for a replacement machine or a technician; suppliers in the UAE contact you.
Post a request