Detroit · Air system
Detroit Exhaust manifold pressure sensors (P3) fault codes
The MCM measures exhaust manifold pressure on each bank. Detroit lists circuit faults, stuck-in-range and rationality checks, and drift of the exhaust pressure sensors.
Where to read it
Connect a Detroit-capable diagnostic tool (Diagnostic Link or a compatible scan tool) to the vehicle diagnostic socket.
What do these codes mean?
Detroit codes SPN 3609 FMI 2 to SPN 521141 FMI 4 are all about the exhaust manifold pressure sensors (P3). Most are erratic or implausible faults; none needs an immediate stop. Start with this check: check the exhaust pressure sensor tube for soot plugging and leaks.
How urgent are they?
None of the 15 codes here means stop now; all 15 can wait until the shift ends, but find the cause before the next one.
- Check soon15
What should I check first?
Check the exhaust pressure sensor tube for soot plugging and leaks.
Shared checks15 of 15
Stop nowshut down and fix before working onCheck soonfind the cause before the next shiftInfonothing is failing yet
Detroit SPN 3609 FMI 2Sensor Drift Fault for Second Exhaust Pressure
Detroit lists SPN 3609 FMI 2 as "Sensor Drift Fault for Second Exhaust Pressure". The MCM judged the exhaust pressure sensor reading erratic or not plausible compared with other sensors or its own history. The DPF inlet pressure is measured to find the filter restriction; a not-plausible value means the sensor or hose is suspect.· Erratic or implausibleErratic or implausibleCheck soonCauses
- Loose or corroded connector causing a noisy signal
- A drifting exhaust pressure sensor or a related fault in the part it measures
Checks
- 1Watch the live value while wiggling the harness to find an intermittent connection.
- 2Compare the exhaust pressure sensor reading with a second reference such as a gauge or another sensor on the engine.
The reading against the band the controller allows. Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good: A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
Detroit SPN 3609 FMI 12Pressure DPF Inlet Not Plausible
Detroit lists SPN 3609 FMI 12 as "Pressure DPF Inlet Not Plausible". The MCM lost the exhaust pressure sensor signal completely. The DPF inlet pressure is measured to find the filter restriction; a not-plausible value means the sensor or hose is suspect.· Part or controllerPart or controllerCheck soonCauses
- Signal path broken at the connector or the harness
- Failed sensor or module
Checks
- 1Check the connector and the power supply to the exhaust pressure sensor.
- 2Check the signal wire to the MCM for an open.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Check power and ground at the module connector with the key on, then its fuses.
Good: Battery voltage on power, under 0.2 V drop on ground. Then it needs the service tool.
Detroit SPN 6384 FMI 2Sensor Drift Fault for First Exhaust Pressure
Same failure as SPN 3609 FMI 2 ("Sensor Drift Fault for Second Exhaust Pressure") on a sibling part: Detroit lists SPN 6384 FMI 2 as "Sensor Drift Fault for First Exhaust Pressure". The first exhaust pressure sensor drifts over time; the MCM compares it with the ambient pressure to detect drift.· Erratic or implausibleErratic or implausibleCheck soonCauses
- The causes listed under SPN 3609 FMI 2, found on this part and its own connector and harness leg
- A fault that affects only this channel and not the part that the first code names
Checks
- 1Run the checks listed under SPN 3609 FMI 2, but at this part and on its own wires.
- 2Compare it with the sibling part that has no code; a reading that differs from it marks this one as the faulty part.
The reading against the band the controller allows. Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good: A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
Detroit SPN 8619 FMI 11P3 Sensor 1 Stuck in Range Check High
Detroit lists SPN 8619 FMI 11 as "P3 Sensor 1 Stuck in Range Check High". The MCM judged the exhaust pressure sensor reading erratic or not plausible compared with other sensors or its own history. Exhaust manifold pressure sensor 1 (P3 bank 1) is checked for stuck values and rationality.· Erratic or implausibleErratic or implausibleCheck soonCauses
- Loose or corroded connector causing a noisy signal
- A drifting exhaust pressure sensor or a related fault in the part it measures
Checks
- 1Watch the live value while wiggling the harness to find an intermittent connection.
- 2Compare the exhaust pressure sensor reading with a second reference such as a gauge or another sensor on the engine.
The reading against the band the controller allows. Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good: A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
Detroit SPN 8619 FMI 14P3 Sensor 1 Stuck in Range Check Low
Detroit lists SPN 8619 FMI 14 as "P3 Sensor 1 Stuck in Range Check Low". The MCM judged the exhaust pressure sensor reading erratic or not plausible compared with other sensors or its own history. Exhaust manifold pressure sensor 1 (P3 bank 1) is checked for stuck values and rationality.· Erratic or implausibleErratic or implausibleCheck soonCauses
- Loose or corroded connector causing a noisy signal
- A drifting exhaust pressure sensor or a related fault in the part it measures
Checks
- 1Watch the live value while wiggling the harness to find an intermittent connection.
- 2Compare the exhaust pressure sensor reading with a second reference such as a gauge or another sensor on the engine.
The reading against the band the controller allows. Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good: A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
Detroit SPN 8619 FMI 20Engine Exhaust Manifold Absolute Pressure 1 Rationality (Low Box)
Same failure as SPN 3609 FMI 12 ("Pressure DPF Inlet Not Plausible") on a sibling part: Detroit lists SPN 8619 FMI 20 as "Engine Exhaust Manifold Absolute Pressure 1 Rationality (Low Box)". Exhaust manifold pressure sensor 1 (P3 bank 1) is checked for stuck values and rationality.· Erratic or implausibleErratic or implausibleCheck soonCauses
- The causes listed under SPN 3609 FMI 12, found on this part and its own connector and harness leg
- A fault that affects only this channel and not the part that the first code names
Checks
- 1Run the checks listed under SPN 3609 FMI 12, but at this part and on its own wires.
- 2Compare it with the sibling part that has no code; a reading that differs from it marks this one as the faulty part.
The reading against the band the controller allows. Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good: A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
Detroit SPN 8619 FMI 21Engine Exhaust Manifold Absolute Pressure 1 Rationality (High Box)
Same failure as SPN 3609 FMI 12 ("Pressure DPF Inlet Not Plausible") on a sibling part: Detroit lists SPN 8619 FMI 21 as "Engine Exhaust Manifold Absolute Pressure 1 Rationality (High Box)". Exhaust manifold pressure sensor 1 (P3 bank 1) is checked for stuck values and rationality.· Erratic or implausibleErratic or implausibleCheck soonCauses
- The causes listed under SPN 3609 FMI 12, found on this part and its own connector and harness leg
- A fault that affects only this channel and not the part that the first code names
Checks
- 1Run the checks listed under SPN 3609 FMI 12, but at this part and on its own wires.
- 2Compare it with the sibling part that has no code; a reading that differs from it marks this one as the faulty part.
The reading against the band the controller allows. Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good: A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
Detroit SPN 8620 FMI 11P3 Sensor 2 Stuck in Range Check High
Same failure as SPN 8619 FMI 11 ("P3 Sensor 1 Stuck in Range Check High") on a sibling part: Detroit lists SPN 8620 FMI 11 as "P3 Sensor 2 Stuck in Range Check High". Exhaust manifold pressure sensor 2 (P3 bank 2) is checked for stuck values and rationality.· Erratic or implausibleErratic or implausibleCheck soonCauses
- The causes listed under SPN 8619 FMI 11, found on this part and its own connector and harness leg
- A fault that affects only this channel and not the part that the first code names
Checks
- 1Run the checks listed under SPN 8619 FMI 11, but at this part and on its own wires.
- 2Compare it with the sibling part that has no code; a reading that differs from it marks this one as the faulty part.
The reading against the band the controller allows. Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good: A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
Detroit SPN 8620 FMI 14P3 Sensor 2 Stuck in Range Check Low
Same failure as SPN 8619 FMI 14 ("P3 Sensor 1 Stuck in Range Check Low") on a sibling part: Detroit lists SPN 8620 FMI 14 as "P3 Sensor 2 Stuck in Range Check Low". Exhaust manifold pressure sensor 2 (P3 bank 2) is checked for stuck values and rationality.· Erratic or implausibleErratic or implausibleCheck soonCauses
- The causes listed under SPN 8619 FMI 14, found on this part and its own connector and harness leg
- A fault that affects only this channel and not the part that the first code names
Checks
- 1Run the checks listed under SPN 8619 FMI 14, but at this part and on its own wires.
- 2Compare it with the sibling part that has no code; a reading that differs from it marks this one as the faulty part.
The reading against the band the controller allows. Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good: A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
Detroit SPN 8620 FMI 20Engine Exhaust Manifold Absolute Pressure 2 Rationality (Low Box)
Same failure as SPN 3609 FMI 12 ("Pressure DPF Inlet Not Plausible") on a sibling part: Detroit lists SPN 8620 FMI 20 as "Engine Exhaust Manifold Absolute Pressure 2 Rationality (Low Box)". Exhaust manifold pressure sensor 2 (P3 bank 2) is checked for stuck values and rationality.· Erratic or implausibleErratic or implausibleCheck soonCauses
- The causes listed under SPN 3609 FMI 12, found on this part and its own connector and harness leg
- A fault that affects only this channel and not the part that the first code names
Checks
- 1Run the checks listed under SPN 3609 FMI 12, but at this part and on its own wires.
- 2Compare it with the sibling part that has no code; a reading that differs from it marks this one as the faulty part.
The reading against the band the controller allows. Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good: A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
Detroit SPN 8620 FMI 21Engine Exhaust Manifold Absolute Pressure 2 Rationality (High Box)
Same failure as SPN 3609 FMI 12 ("Pressure DPF Inlet Not Plausible") on a sibling part: Detroit lists SPN 8620 FMI 21 as "Engine Exhaust Manifold Absolute Pressure 2 Rationality (High Box)". Exhaust manifold pressure sensor 2 (P3 bank 2) is checked for stuck values and rationality.· Erratic or implausibleErratic or implausibleCheck soonCauses
- The causes listed under SPN 3609 FMI 12, found on this part and its own connector and harness leg
- A fault that affects only this channel and not the part that the first code names
Checks
- 1Run the checks listed under SPN 3609 FMI 12, but at this part and on its own wires.
- 2Compare it with the sibling part that has no code; a reading that differs from it marks this one as the faulty part.
The reading against the band the controller allows. Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good: A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
Detroit SPN 521140 FMI 3Exhaust Manifold Pressure Sensor Bank 1 Circuit Failed High
Detroit lists SPN 521140 FMI 3 as "Exhaust Manifold Pressure Sensor Bank 1 Circuit Failed High". The MCM saw the exhaust pressure sensor signal above its valid range. That usually means the signal wire is shorted to a supply voltage or is open at the sensor. Exhaust manifold pressure sensor bank 1 circuit.· Shorted highShorted highCheck soonCauses
- Signal wire shorted to the 5 V supply or open between the exhaust pressure sensor and the MCM
- The exhaust pressure sensor has failed inside
Checks
- 1Unplug the exhaust pressure sensor and measure the signal pin; a reading near supply with the sensor off means the harness is shorted or open.
- 2Bridge the signal to the return with the sensor unplugged; the reading should fall away if the harness is good.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Key off, unplug the sensor and the controller. Measure resistance from the signal wire to the supply wire and to battery positive.
Good: Open circuit (OL) between them. Any low reading is the short.
Detroit SPN 521140 FMI 4Exhaust Manifold Pressure Sensor Bank 1 Circuit Failed Low
Detroit lists SPN 521140 FMI 4 as "Exhaust Manifold Pressure Sensor Bank 1 Circuit Failed Low". The MCM saw the exhaust pressure sensor signal below its valid range. That usually means the signal wire is shorted to ground or the sensor has failed. Exhaust manifold pressure sensor bank 1 circuit.· Shorted lowShorted lowCheck soonCauses
- Signal wire chafed against the engine and shorted to ground
- The exhaust pressure sensor has failed inside or its supply wire is open
Checks
- 1Unplug the exhaust pressure sensor and check whether the signal rises; if it stays low the harness is shorted to ground.
- 2Check the sensor supply at the connector with the key on and trace it back to the MCM if it is missing.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Key off, unplug both ends. Measure resistance from the signal wire to ground and to the machine frame.
Good: Open circuit (OL) to ground. A low reading means chafed insulation touching metal.
Detroit SPN 521141 FMI 3Exhaust Manifold Pressure Sensor Bank 2 Circuit Failed High
Same failure as SPN 521140 FMI 3 ("Exhaust Manifold Pressure Sensor Bank 1 Circuit Failed High") on a sibling part: Detroit lists SPN 521141 FMI 3 as "Exhaust Manifold Pressure Sensor Bank 2 Circuit Failed High". Exhaust manifold pressure sensor bank 2 circuit.· Shorted highShorted highCheck soonCauses
- The causes listed under SPN 521140 FMI 3, found on this part and its own connector and harness leg
- A fault that affects only this channel and not the part that the first code names
Checks
- 1Run the checks listed under SPN 521140 FMI 3, but at this part and on its own wires.
- 2Compare it with the sibling part that has no code; a reading that differs from it marks this one as the faulty part.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Key off, unplug the sensor and the controller. Measure resistance from the signal wire to the supply wire and to battery positive.
Good: Open circuit (OL) between them. Any low reading is the short.
Detroit SPN 521141 FMI 4Exhaust Manifold Pressure Bank 2 Sensor Circuit Failed Low
Same failure as SPN 521140 FMI 4 ("Exhaust Manifold Pressure Sensor Bank 1 Circuit Failed Low") on a sibling part: Detroit lists SPN 521141 FMI 4 as "Exhaust Manifold Pressure Bank 2 Sensor Circuit Failed Low". Exhaust manifold pressure sensor bank 2 circuit.· Shorted lowShorted lowCheck soonCauses
- The causes listed under SPN 521140 FMI 4, found on this part and its own connector and harness leg
- A fault that affects only this channel and not the part that the first code names
Checks
- 1Run the checks listed under SPN 521140 FMI 4, but at this part and on its own wires.
- 2Compare it with the sibling part that has no code; a reading that differs from it marks this one as the faulty part.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Key off, unplug both ends. Measure resistance from the signal wire to ground and to the machine frame.
Good: Open circuit (OL) to ground. A low reading means chafed insulation touching metal.
Shared checks
Checks, in order
- 1Check the exhaust pressure sensor tube for soot plugging and leaks.
- 2Inspect the connector and wiring for heat damage and chafing.
- 3Compare the reading with the ambient pressure with the engine off.
- 4Look for exhaust leaks at the manifold and the turbo.
Causes
- Plugged or leaking exhaust pressure sensor line
- Sensor connector or harness damage
- Sensor drift or a stuck-in-range sensor
- Exhaust restriction or a leak at the manifold
Most codes here: erratic or implausible (10 of 15)
Watch the live value on the service tool while you flex the harness and tap the connector.
When to stop
You'll notice: A loss of power, turbo or EGR control faults and a check-engine lamp.
Most sensor and wiring faults can be traced with a multimeter and the wiring diagram. Disconnect the battery before unplugging controllers; if the controller itself is suspect or needs programming, that needs the dealer’s service tool.
Each code above shows its own urgency. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Related on Equipments Finder
Sources
- Detroit Diesel DD15 Gen 5 (2023) Fault Codes List, Diesel Repair (SPN/FMI with Detroit descriptions)
Codes and meanings come from the sources above; short titles shorten the standard J1939 wording. Failure types, checks, meter tests and drawings are general workshop guidance, not the maker's. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
