Detroit · Aftertreatment
Detroit DPF pressure, soot load and regeneration fault codes
The DPF delta pressure sensor and the soot model tell the ACM how full the filter is. Detroit logs sensor faults, high soot levels, failed regeneration and the end of filter life.
Where to read it
Connect a Detroit-capable diagnostic tool (Diagnostic Link or a compatible scan tool) to the vehicle diagnostic socket.
What do these codes mean?
Detroit codes SPN 3251 FMI 0 to SPN 521133 FMI 13 are all about the dPF pressure, soot load and regeneration. Most are real condition faults; 3 need an immediate stop. Start with this check: check the delta pressure sensor tubes for soot plugging, kinks and leaks.
How urgent are they?
3 of 29 codes here mean stop now; the other 26 can wait until the shift ends, but find the cause before the next one.
- Stop now3
- Check soon26
What should I check first?
Check the delta pressure sensor tubes for soot plugging, kinks and leaks.
Shared checks29 of 29
Stop nowshut down and fix before working onCheck soonfind the cause before the next shiftInfonothing is failing yet
Detroit SPN 3251 FMI 0Diesel Particulate Filter Pressure Out of Range Very High
Detroit lists SPN 3251 FMI 0 as "Diesel Particulate Filter Pressure Out of Range Very High". The ACM reports that the measured value itself is out of its normal range; the DPF delta pressure sensor may be correct and a real condition may exist. The DPF pressure value is used to judge how loaded the filter is; implausible values mean the sensor, the hoses or the filter is at fault.· Real conditionReal conditionStop nowCauses
- A real fault in the system the DPF delta pressure sensor measures
- Sensor reading skewed by a wiring or connector problem
Checks
- 1Confirm the real value with a mechanical gauge or an independent reading before replacing the DPF delta pressure sensor.
- 2Check the system for the condition the code describes and fix it first.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 3251 FMI 20Diesel Oxidation Catalyst Inlet Pressure - Not Plausible
Detroit lists SPN 3251 FMI 20 as "Diesel Oxidation Catalyst Inlet Pressure - Not Plausible". The ACM found the DPF delta pressure sensor value drifted away from what the engine state says it should be. The DPF pressure value is used to judge how loaded the filter is; implausible values mean the sensor, the hoses or the filter is at fault.· Erratic or implausibleErratic or implausibleCheck soonCauses
- Sensor aged, contaminated or out of calibration
- A real fault in the system being measured
Checks
- 1Compare the DPF delta pressure sensor reading with a reference gauge or thermometer with the engine off and cold.
- 2Check the system around the DPF delta pressure sensor for leaks, restrictions or contamination.
The reading against the band the controller allows. Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good: A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
Detroit SPN 3251 FMI 21Diesel Oxidation Catalyst Inlet / Outlet Pressure - Not Plausible
Same failure as SPN 3251 FMI 20 ("Diesel Oxidation Catalyst Inlet Pressure - Not Plausible") on a sibling part: Detroit lists SPN 3251 FMI 21 as "Diesel Oxidation Catalyst Inlet / Outlet Pressure - Not Plausible". The DPF pressure value is used to judge how loaded the filter is; implausible values mean the sensor, the hoses or the filter is at fault.· Erratic or implausibleErratic or implausibleCheck soonCauses
- The causes listed under SPN 3251 FMI 20, found on this part and its own connector and harness leg
- A fault that affects only this channel and not the part that the first code names
Checks
- 1Run the checks listed under SPN 3251 FMI 20, but at this part and on its own wires.
- 2Compare it with the sibling part that has no code; a reading that differs from it marks this one as the faulty part.
The reading against the band the controller allows. Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good: A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
Detroit SPN 3556 FMI 0Regeneration Temperature - Out of Range High
Detroit lists SPN 3556 FMI 0 as "Regeneration Temperature - Out of Range High". The ACM reports that the measured value itself is out of its normal range; the DPF delta pressure sensor may be correct and a real condition may exist. During regeneration the exhaust temperature is modelled and compared with the real value; a failure to rise means the doser or DOC is not working.· Real conditionReal conditionCheck soonCauses
- A real fault in the system the DPF delta pressure sensor measures
- Sensor reading skewed by a wiring or connector problem
Checks
- 1Confirm the real value with a mechanical gauge or an independent reading before replacing the DPF delta pressure sensor.
- 2Check the system for the condition the code describes and fix it first.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 3556 FMI 1Exhaust Temperature Does Not Increase Above the Modeled Thresholdwhen Regeneration is Enabled
Detroit lists SPN 3556 FMI 1 as "Exhaust Temperature Does Not Increase Above the Modeled Thresholdwhen Regeneration is Enabled". The ACM reports that the measured value itself is out of its normal range; the DPF delta pressure sensor may be correct and a real condition may exist. During regeneration the exhaust temperature is modelled and compared with the real value; a failure to rise means the doser or DOC is not working.· Real conditionReal conditionCheck soonCauses
- A real fault in the system the DPF delta pressure sensor measures
- Sensor reading skewed by a wiring or connector problem
Checks
- 1Confirm the real value with a mechanical gauge or an independent reading before replacing the DPF delta pressure sensor.
- 2Check the system for the condition the code describes and fix it first.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 3610 FMI 2DPF Outlet Pressure Sensor - Not Plausible
Same failure as SPN 3251 FMI 20 ("Diesel Oxidation Catalyst Inlet Pressure - Not Plausible") on a sibling part: Detroit lists SPN 3610 FMI 2 as "DPF Outlet Pressure Sensor - Not Plausible". The DPF outlet pressure is measured together with the inlet value to calculate the pressure drop across the filter.· Erratic or implausibleErratic or implausibleCheck soonCauses
- The causes listed under SPN 3251 FMI 20, found on this part and its own connector and harness leg
- A fault that affects only this channel and not the part that the first code names
Checks
- 1Run the checks listed under SPN 3251 FMI 20, but at this part and on its own wires.
- 2Compare it with the sibling part that has no code; a reading that differs from it marks this one as the faulty part.
The reading against the band the controller allows. Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good: A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
Detroit SPN 3610 FMI 12Pressure DPF Outlet Not Plausible
Same failure as SPN 3251 FMI 20 ("Diesel Oxidation Catalyst Inlet Pressure - Not Plausible") on a sibling part: Detroit lists SPN 3610 FMI 12 as "Pressure DPF Outlet Not Plausible". The DPF outlet pressure is measured together with the inlet value to calculate the pressure drop across the filter.· Part or controllerPart or controllerCheck soonCauses
- The causes listed under SPN 3251 FMI 20, found on this part and its own connector and harness leg
- A fault that affects only this channel and not the part that the first code names
Checks
- 1Run the checks listed under SPN 3251 FMI 20, but at this part and on its own wires.
- 2Compare it with the sibling part that has no code; a reading that differs from it marks this one as the faulty part.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Check power and ground at the module connector with the key on, then its fuses.
Good: Battery voltage on power, under 0.2 V drop on ground. Then it needs the service tool.
Detroit SPN 3711 FMI 31Parked Regen Failed - DOC Temp In Low Preventing Dosing
Detroit lists SPN 3711 FMI 31 as "Parked Regen Failed - DOC Temp In Low Preventing Dosing". The ACM logged a condition on the DPF delta pressure sensor; the title says what it measured. A parked regeneration needs the DOC inlet temperature high enough for dosing; this code records that it was too low and the regeneration stopped.· Real conditionReal conditionCheck soonCauses
- A real fault in the system the DPF delta pressure sensor watches
- Sensor or wiring fault
Checks
- 1Read the live value and compare it with a reference.
- 2Check the connector and wiring.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 3713 FMI 31High Idle Regeneration Aborted - Low Regeneration Temperature
Detroit lists SPN 3713 FMI 31 as "High Idle Regeneration Aborted - Low Regeneration Temperature". The ACM logged a condition on the DPF delta pressure sensor; the title says what it measured. A high idle regeneration is stopped when the regeneration temperature stays too low.· Real conditionReal conditionCheck soonCauses
- A real fault in the system the DPF delta pressure sensor watches
- Sensor or wiring fault
Checks
- 1Read the live value and compare it with a reference.
- 2Check the connector and wiring.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 3716 FMI 31Coolant Temperature Fails to Reach 60°C (140°F) During High Idle Regeneration Initiation
Detroit lists SPN 3716 FMI 31 as "Coolant Temperature Fails to Reach 60°C (140°F) During High Idle Regeneration Initiation". The ACM logged a condition on the DPF delta pressure sensor; the title says what it measured. High idle regeneration will not start until the coolant has warmed up, so a cold engine delays or aborts it.· Real conditionReal conditionCheck soonCauses
- A real fault in the system the DPF delta pressure sensor watches
- Sensor or wiring fault
Checks
- 1Read the live value and compare it with a reference.
- 2Check the connector and wiring.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 3719 FMI 0Soot Level Very High
Detroit lists SPN 3719 FMI 0 as "Soot Level Very High". The ACM reports that the measured value itself is out of its normal range; the DPF delta pressure sensor may be correct and a real condition may exist. The soot level is the ACM estimate of the soot stored in the filter; the levels rise in steps to warn the driver.· Real conditionReal conditionStop nowCauses
- A real fault in the system the DPF delta pressure sensor measures
- Sensor reading skewed by a wiring or connector problem
Checks
- 1Confirm the real value with a mechanical gauge or an independent reading before replacing the DPF delta pressure sensor.
- 2Check the system for the condition the code describes and fix it first.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 3719 FMI 15Diesel Particulate Filter Zone 3 Condition
Detroit lists SPN 3719 FMI 15 as "Diesel Particulate Filter Zone 3 Condition". The ACM reports that the measured value itself is out of its normal range; the DPF delta pressure sensor may be correct and a real condition may exist. The soot level is the ACM estimate of the soot stored in the filter; the levels rise in steps to warn the driver.· Real conditionReal conditionCheck soonCauses
- A real fault in the system the DPF delta pressure sensor measures
- Sensor reading skewed by a wiring or connector problem
Checks
- 1Confirm the real value with a mechanical gauge or an independent reading before replacing the DPF delta pressure sensor.
- 2Check the system for the condition the code describes and fix it first.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 3719 FMI 16Soot Level High
The ACM estimates the soot in the diesel particulate filter is high. This is the first step before the very high and stop-engine levels, and it means regeneration has not been able to clear the filter in normal driving.· Real conditionReal conditionCheck soonCauses
- Too many short trips or idling without reaching regeneration temperature
- Regeneration inhibited by an exhaust temperature, doser or pressure sensor fault
- Doser or DOC not raising the temperature enough
- Blocked DPF or a delta pressure reading that is wrong
Checks
- 1Read the stored codes first; fix any doser, temperature sensor or delta pressure fault before regenerating.
- 2Start a parked regeneration with the tool and watch the DOC and DPF temperatures rise.
- 3Check the delta pressure sensor hoses for plugging and leaks.
- 4Review how the truck is used; frequent idling and short runs keep the soot level climbing.
- 5If a parked regeneration does not reduce the soot, plan a DPF cleaning or replacement.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 3719 FMI 31Dash Lights Illuminate During Normal Service
Detroit lists SPN 3719 FMI 31 as "Dash Lights Illuminate During Normal Service". The ACM logged a condition on the DPF delta pressure sensor; the title says what it measured. The soot level is the ACM estimate of the soot stored in the filter; the levels rise in steps to warn the driver.· Real conditionReal conditionCheck soonCauses
- A real fault in the system the DPF delta pressure sensor watches
- Sensor or wiring fault
Checks
- 1Read the live value and compare it with a reference.
- 2Check the connector and wiring.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 3720 FMI 15Diesel Particulate Filter Has Reached the End of Its Service Life
Detroit lists SPN 3720 FMI 15 as "Diesel Particulate Filter Has Reached the End of Its Service Life". The ACM reports that the measured value itself is out of its normal range; the DPF delta pressure sensor may be correct and a real condition may exist. The DPF service life code is set when the filter has reached the end of its expected life.· Real conditionReal conditionCheck soonCauses
- A real fault in the system the DPF delta pressure sensor measures
- Sensor reading skewed by a wiring or connector problem
Checks
- 1Confirm the real value with a mechanical gauge or an independent reading before replacing the DPF delta pressure sensor.
- 2Check the system for the condition the code describes and fix it first.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 3936 FMI 18Diesel Particulate Filter (DPF) Pressure - Out of Range Low
Detroit lists SPN 3936 FMI 18 as "Diesel Particulate Filter (DPF) Pressure - Out of Range Low". The ACM reports that the measured value itself is out of its normal range; the DPF delta pressure sensor may be correct and a real condition may exist. The DPF pressure value is below the allowed range, which can mean a leaking sensor line or an empty or damaged filter.· Real conditionReal conditionCheck soonCauses
- A real fault in the system the DPF delta pressure sensor measures
- Sensor reading skewed by a wiring or connector problem
Checks
- 1Confirm the real value with a mechanical gauge or an independent reading before replacing the DPF delta pressure sensor.
- 2Check the system for the condition the code describes and fix it first.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 5397 FMI 31Regen Frequency Error
Detroit lists SPN 5397 FMI 31 as "Regen Frequency Error". The ACM logged a condition on the DPF delta pressure sensor; the title says what it measured. The regeneration frequency monitor sets this code when regenerations happen more often than expected.· Real conditionReal conditionCheck soonCauses
- A real fault in the system the DPF delta pressure sensor watches
- Sensor or wiring fault
Checks
- 1Read the live value and compare it with a reference.
- 2Check the connector and wiring.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 5443 FMI 0DPF HC Absorption Very High
Detroit lists SPN 5443 FMI 0 as "DPF HC Absorption Very High". The ACM reports that the measured value itself is out of its normal range; the DPF delta pressure sensor may be correct and a real condition may exist. The HC absorption in the DPF is estimated; very high values mean unburned fuel is held in the filter.· Real conditionReal conditionStop nowCauses
- A real fault in the system the DPF delta pressure sensor measures
- Sensor reading skewed by a wiring or connector problem
Checks
- 1Confirm the real value with a mechanical gauge or an independent reading before replacing the DPF delta pressure sensor.
- 2Check the system for the condition the code describes and fix it first.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 5443 FMI 15DPF HC Absorption Warning
Detroit lists SPN 5443 FMI 15 as "DPF HC Absorption Warning". The ACM reports that the measured value itself is out of its normal range; the DPF delta pressure sensor may be correct and a real condition may exist. The HC absorption in the DPF is estimated; very high values mean unburned fuel is held in the filter.· Real conditionReal conditionCheck soonCauses
- A real fault in the system the DPF delta pressure sensor measures
- Sensor reading skewed by a wiring or connector problem
Checks
- 1Confirm the real value with a mechanical gauge or an independent reading before replacing the DPF delta pressure sensor.
- 2Check the system for the condition the code describes and fix it first.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 5443 FMI 16DPF HC Absorption High
Detroit lists SPN 5443 FMI 16 as "DPF HC Absorption High". The ACM reports that the measured value itself is out of its normal range; the DPF delta pressure sensor may be correct and a real condition may exist. The HC absorption in the DPF is estimated; very high values mean unburned fuel is held in the filter.· Real conditionReal conditionCheck soonCauses
- A real fault in the system the DPF delta pressure sensor measures
- Sensor reading skewed by a wiring or connector problem
Checks
- 1Confirm the real value with a mechanical gauge or an independent reading before replacing the DPF delta pressure sensor.
- 2Check the system for the condition the code describes and fix it first.
The reading against the band the controller allows. Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good: If the gauge agrees with the display, fix the machine, not the sensor.
Detroit SPN 520349 FMI 14DPF Filtration Efficiency Low
Detroit lists SPN 520349 FMI 14 as "DPF Filtration Efficiency Low". The ACM judged the DPF delta pressure sensor reading erratic or not plausible compared with other sensors or its own history. DPF filtration efficiency is low, which means soot is passing through a damaged or missing filter.· Erratic or implausibleErratic or implausibleCheck soonCauses
- Loose or corroded connector causing a noisy signal
- A drifting DPF delta pressure sensor or a related fault in the part it measures
Checks
- 1Watch the live value while wiggling the harness to find an intermittent connection.
- 2Compare the DPF delta pressure sensor reading with a second reference such as a gauge or another sensor on the engine.
The reading against the band the controller allows. Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good: A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
Detroit SPN 520386 FMI 9DPF Delta Pressure Sensor SENT Data Timeout
Detroit lists SPN 520386 FMI 9 as "DPF Delta Pressure Sensor SENT Data Timeout". The ACM lost the DPF delta pressure sensor signal completely. The DPF delta pressure sensor sends its signal as SENT data; timeouts, checksum errors and invalid values have separate entries.· Lost messageLost messageCheck soonCauses
- Signal path broken at the connector or the harness
- Failed sensor or module
Checks
- 1Check the connector and the power supply to the DPF delta pressure sensor.
- 2Check the signal wire to the ACM for an open.
Typical J1939 link: two modules, CAN high and low, a 120 Ω terminator at each end. Meter test
Key off. Measure resistance between CAN high and CAN low at the diagnostic connector.
Good: About 60 Ω on a two-terminator J1939 link. About 120 Ω means one terminator or one leg is open.
Detroit SPN 520386 FMI 12DPF Delta Pressure Sensor Signal Not Valid
Detroit lists SPN 520386 FMI 12 as "DPF Delta Pressure Sensor Signal Not Valid". The ACM lost the DPF delta pressure sensor signal completely. The DPF delta pressure sensor sends its signal as SENT data; timeouts, checksum errors and invalid values have separate entries.· Part or controllerPart or controllerCheck soonCauses
- Signal path broken at the connector or the harness
- Failed sensor or module
Checks
- 1Check the connector and the power supply to the DPF delta pressure sensor.
- 2Check the signal wire to the ACM for an open.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Check power and ground at the module connector with the key on, then its fuses.
Good: Battery voltage on power, under 0.2 V drop on ground. Then it needs the service tool.
Detroit SPN 520386 FMI 13DPF Delta Pressure Sensor SENT Data Checksum Error 1
Detroit lists SPN 520386 FMI 13 as "DPF Delta Pressure Sensor SENT Data Checksum Error 1". The ACM found the DPF delta pressure sensor value drifted away from what the engine state says it should be. The DPF delta pressure sensor sends its signal as SENT data; timeouts, checksum errors and invalid values have separate entries.· Part or controllerPart or controllerCheck soonCauses
- Sensor aged, contaminated or out of calibration
- A real fault in the system being measured
Checks
- 1Compare the DPF delta pressure sensor reading with a reference gauge or thermometer with the engine off and cold.
- 2Check the system around the DPF delta pressure sensor for leaks, restrictions or contamination.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Check power and ground at the module connector with the key on, then its fuses.
Good: Battery voltage on power, under 0.2 V drop on ground. Then it needs the service tool.
Detroit SPN 520386 FMI 14DPF Delta Pressure Sensor SENT Data Error
Same failure as SPN 520386 FMI 9 ("DPF Delta Pressure Sensor SENT Data Timeout") on a sibling part: Detroit lists SPN 520386 FMI 14 as "DPF Delta Pressure Sensor SENT Data Error". The DPF delta pressure sensor sends its signal as SENT data; timeouts, checksum errors and invalid values have separate entries.· Lost messageLost messageCheck soonCauses
- The causes listed under SPN 520386 FMI 9, found on this part and its own connector and harness leg
- A fault that affects only this channel and not the part that the first code names
Checks
- 1Run the checks listed under SPN 520386 FMI 9, but at this part and on its own wires.
- 2Compare it with the sibling part that has no code; a reading that differs from it marks this one as the faulty part.
Typical J1939 link: two modules, CAN high and low, a 120 Ω terminator at each end. Meter test
Key off. Measure resistance between CAN high and CAN low at the diagnostic connector.
Good: About 60 Ω on a two-terminator J1939 link. About 120 Ω means one terminator or one leg is open.
Detroit SPN 520386 FMI 19DPF Delta Pressure Sensor DPF Out Signal Not Valid
Detroit lists SPN 520386 FMI 19 as "DPF Delta Pressure Sensor DPF Out Signal Not Valid". The ACM lost the DPF delta pressure sensor signal completely. The DPF delta pressure sensor sends its signal as SENT data; timeouts, checksum errors and invalid values have separate entries.· Lost messageLost messageCheck soonCauses
- Signal path broken at the connector or the harness
- Failed sensor or module
Checks
- 1Check the connector and the power supply to the DPF delta pressure sensor.
- 2Check the signal wire to the ACM for an open.
Typical J1939 link: two modules, CAN high and low, a 120 Ω terminator at each end. Meter test
Key off. Measure resistance between CAN high and CAN low at the diagnostic connector.
Good: About 60 Ω on a two-terminator J1939 link. About 120 Ω means one terminator or one leg is open.
Detroit SPN 520387 FMI 19DPF Delta Pressure Sensor Delta P Signal Not Valid
Detroit lists SPN 520387 FMI 19 as "DPF Delta Pressure Sensor Delta P Signal Not Valid". The ACM lost the DPF delta pressure sensor signal completely. The DPF delta pressure signal is not valid.· Lost messageLost messageCheck soonCauses
- Signal path broken at the connector or the harness
- Failed sensor or module
Checks
- 1Check the connector and the power supply to the DPF delta pressure sensor.
- 2Check the signal wire to the ACM for an open.
Typical J1939 link: two modules, CAN high and low, a 120 Ω terminator at each end. Meter test
Key off. Measure resistance between CAN high and CAN low at the diagnostic connector.
Good: About 60 Ω on a two-terminator J1939 link. About 120 Ω means one terminator or one leg is open.
Detroit SPN 520388 FMI 13DPF Delta Pressure Sensor SENT Data Checksum Error 2
Same failure as SPN 520386 FMI 13 ("DPF Delta Pressure Sensor SENT Data Checksum Error 1") on a sibling part: Detroit lists SPN 520388 FMI 13 as "DPF Delta Pressure Sensor SENT Data Checksum Error 2". The DPF delta pressure sensor SENT data has a checksum error on the second channel.· Part or controllerPart or controllerCheck soonCauses
- The causes listed under SPN 520386 FMI 13, found on this part and its own connector and harness leg
- A fault that affects only this channel and not the part that the first code names
Checks
- 1Run the checks listed under SPN 520386 FMI 13, but at this part and on its own wires.
- 2Compare it with the sibling part that has no code; a reading that differs from it marks this one as the faulty part.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Check power and ground at the module connector with the key on, then its fuses.
Good: Battery voltage on power, under 0.2 V drop on ground. Then it needs the service tool.
Detroit SPN 521133 FMI 13ACM Reported Ash Mileage is Lower than the MCM Stored Value
Detroit lists SPN 521133 FMI 13 as "ACM Reported Ash Mileage is Lower than the MCM Stored Value". The ACM found the DPF delta pressure sensor value drifted away from what the engine state says it should be. ACM reported ash mileage is lower than the MCM stored value.· Part or controllerPart or controllerCheck soonCauses
- Sensor aged, contaminated or out of calibration
- A real fault in the system being measured
Checks
- 1Compare the DPF delta pressure sensor reading with a reference gauge or thermometer with the engine off and cold.
- 2Check the system around the DPF delta pressure sensor for leaks, restrictions or contamination.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Check power and ground at the module connector with the key on, then its fuses.
Good: Battery voltage on power, under 0.2 V drop on ground. Then it needs the service tool.
Shared checks
Checks, in order
- 1Check the delta pressure sensor tubes for soot plugging, kinks and leaks.
- 2Run a parked regeneration with the tool and watch whether the soot level falls.
- 3Inspect the DPF for damage, ash loading or a cracked housing.
- 4Check the DOC and the HC doser, because poor regeneration often starts there.
Causes
- Blocked or full DPF
- Delta pressure sensor or tube fault
- Failed regenerations
- Short duty cycles
Most codes here: real condition (16 of 29)
Check the real value with a separate gauge or thermometer before blaming the sensor.
When to stop
You'll notice: The DPF lamp, stop-engine lamp and derate depending on the soot level.
Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.
Each code above shows its own urgency. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Related on Equipments Finder
Sources
- Detroit Diesel DD15 Gen 5 (2023) Fault Codes List, Diesel Repair (SPN/FMI with Detroit descriptions)
Codes and meanings come from the sources above; short titles shorten the standard J1939 wording. Failure types, checks, meter tests and drawings are general workshop guidance, not the maker's. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
