EF Logo

mobile cranemade by SANYUAE, Global

SANY STC1600T7Specs and dimensions

Max lifting capacity
160 t
352,739 lb
Main boom, extended
75.5 m
247 ft 8 in
Engine
Weichai WP12.430N

Quick answer

The SANY STC1600T7 is a mobile crane with a Weichai WP12.430N engine rated at 316 kW (424 hp). It lifts up to 160 t, reaches a tip height of 76 m and drives at up to 85 km/h. It suits lifting steel, precast and plant on building sites and erecting tower cranes and site cabins. Its rivals include the XCMG QY100K5C (100 t) and the Liebherr LTM 1160-5.2 (180 t).

SANY STC1600T7 (illustration)

What engine is in the SANY STC1600T7?

The SANY STC1600T7 has a Weichai WP12.430N engine rated at 316 kW (424 hp) gross, at 1,900 rpm. It makes 2,060 Nm (1,519 lbf·ft) of torque. The fuel tank holds 450 L (119 US gal). The figures are from SANY STC1600T7 truck crane specification V1.4, SANY Panama copy. Engines differ by market and emissions stage, so check the engine plate before ordering parts.

How much can a SANY STC1600T7 lift?

The SANY STC1600T7 lifts up to 160 t, reaches a tip height of 76 m and drives at up to 85 km/h. In imperial units the lifting capacity is 352,739 lb. The sheet notes: at 2.5 m minimum rated radius; ratings above 98 t need a higher rope reeving and the 100-130 t hook.

What are the SANY STC1600T7 dimensions?

The SANY STC1600T7 is 16.24 m (53 ft 3 in) long, 3.00 m (9 ft 10 in) wide and 4.00 m (13 ft 1 in) high. As it stands it is too big for the door of a standard shipping container. The XCMG QY100K5C is 14.98 m long, 2.80 m wide and 3.89 m high.

SANY STC1600T7 vs XCMG QY100K5C: what is the difference?

The SANY STC1600T7 and the XCMG QY100K5C are both mobile cranes; this is where their sheets differ. The SANY STC1600T7 has more gross power (316 kW against 294 kW), has more torque (2,060 Nm against 1,900 Nm) and is faster (85 km/h against 80 km/h). Both sets of figures are the makers’ own, for the builds on our sheets.

SANY STC1600T7 vs XCMG QY100K5C, every figure

SANY STC1600T7 dimensions

SANY STC1600T7, side view with dimensions (illustration)4 m16.2 m
Side view
SANY STC1600T7, front view (illustration)3 m
Front view
Overall height
4 m
Overall length
16.2 m
Overall width
3 m

Illustration; figures from the maker's sheet.

How big is the SANY STC1600T7?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

SANY STC1600T7 drawn to scale beside a person, a pickup truck and a 40 ft container. The SANY STC1600T7 is 16.24 m long - about 1.3 forty-foot containers - and 4 m tall, 2.3 times a person's height.SANY STC1600T716.24 × 4 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The SANY STC1600T7 is 16.24 m long - about 1.3 forty-foot containers - and 4 m tall, 2.3 times a person's height.

SANY STC1600T7 load chart

What it lifts as the radius grows, from the maker’s chart. Not for lift planning.

  1. 160 t2.5 m14.1 m boom
  2. 49.2 t10 m32.9 m boom
  3. 22.3 t20 m37.6 m boom
  4. 12.9 t30 m37.6 m boom

Every radius and boom length, 4 configurations, with a reader.

Full load chart

SANY STC1600T7 specifications

Figures are the maker's unless marked: est. is our estimate, and any figure from another site names it. Each links to where it came from. Sheet last updated 18 November 2026.

68 figures in 4 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length16.24 m[1] p.17
Overall width3 m[1] p.17
Overall height3.995 mThe side drawing on p.16 prints 4,000 mm[1] p.17
Ground clearance (minimum)0.31 m[1] p.17
Front extension (boom nose to bumper)2.52 m[1] p.16
Front overhang2.795 m[1] p.16
Axle spacing, axles 1-21.52 m[1] p.16
Axle spacing, axles 2-34.35 m[1] p.16
Axle spacing, axles 3-41.5 m[1] p.16
Axle spacing, axles 4-51.5 m[1] p.16
Dimensions, part 2 of 2
FigureValue (metric)Source
Rear overhang2.009 m[1] p.16
Approach angle17°[1] p.17
Departure angle17°[1] p.17
Tail slewing radius4.5 m[1] p.17
Outrigger span, longitudinal7.55 mThe plan view splits it 4,185 mm + 3,365 mm either side of the slewing centre[1] p.17
Outrigger span, transverse (max)8.1 m[1] p.17
Turning radius (vehicle, min)11 m[1] p.17
Turning radius at boom tip (min)15 mThe drawing on p.16 prints R15,565 for the outermost arc[1] p.17
Carrier length13.674 mest.Estimate: front overhang 2.795 m + axle spacings 1.52 / 4.35 / 1.5 / 1.5 m + rear overhang 2.009 m (front bumper to rear of frame)[1] p.16

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Gross vehicle weight54,600 kgTravel configuration without jib, jib bracket, spare tyre, hooks, auxiliary winch, outrigger floats and counterweight[1] p.17
Axle load, axles 1 / 2 / 3 / 4 / 512 / 12 / 10.2 / 10.2 / 10.2 t[1] p.18
Weight, part 2 of 2
FigureValue (metric)Source
Counterweight52 tMaximum; 12 combinations 1.3 / 11 / 13.3 / 17.3 / 21.3 / 23 / 27 / 31 / 31.3 / 41 / 42.3 / 52 t, fitted by remote control; the lifting cylinder can shift 550 mm fore and aft to add moment[1] p.8
Counterweight carried while travelling23 tWith 4 outrigger pads on board, short distance at low speed (1.3 + 9.7 + 12 t blocks)[1] p.7

Crane

Crane, part 1 of 2
FigureValue (metric)Source
Max lifting capacity160 tAt 2.5 m minimum rated radius; ratings above 98 t need a higher rope reeving and the 100-130 t hook[1] p.17
Main boom length (m, fully extended)75.5 m[1] p.17
Main boom length retracted (m)14.1 m[1] p.17
Main boom + jib length93 m[1] p.17
Main boom + boom extension + jib length102.5 mWith the optional 9.5 m boom extension[1] p.17
Boom sections7, oval cross-section, single-cylinder pin telescoping with one-key extension[1] p.20
Max tip height76 mFully extended main boom[1] p.17
Max tip height with jib93 m[1] p.17
Max tip height with boom extension and jib102.5 m[1] p.17
Jib17.5 m fixed jib, optional 9.5 m extension, offsets 0 / 15 / 30 deg[1] p.6
Max load moment, basic boom5,145 kN.m[1] p.17
Max load moment, fully extended boom2,234 kN.m[1] p.17
Max load moment, boom + jib1,019 kN.m[1] p.17
Max load moment, boom + extension + jib646 kN.m[1] p.17
Max load at fully extended boom9.2 t[1] p.6
Rated capacity, 14.1 m boom at 5 m radius97 t52 t counterweight in the normal (front) position, outriggers fully extended, over 360 deg, 100 % chart[1] p.25
Crane, part 2 of 2
FigureValue (metric)Source
Rated capacity, 14.1 m boom at 10 m radius47.5 tSame chart[1] p.25
Rated capacity, 75.5 m boom at 16 m radius9.2 tSame chart[1] p.25
Rated capacity, 75.5 m boom at 30 m radius7.3 tSame chart[1] p.25
Boom elevation angle0 to 80 deg[1] p.20
Boom raising / lowering time70 s / 100 s[1] p.18
Boom extension / retraction time630 s / 650 s[1] p.18
Main winch single-line speed0-135 m/min, no load[1] p.18
Auxiliary winch single-line speed0-135 m/min, no load (optional winch)[1] p.18
Max single line pull7.5 tBoth winches[1] p.18
Main winch rope20 mm x 370 m[1] p.18
Auxiliary winch rope20 mm x 215 m[1] p.18
Slewing speed1.5 rpm (max)Minimum stable slewing speed below 0.1 deg/s; minimum single-line hoist speed 1.5 m/min or less[1] p.18
Hook block weight735 kg75 t double-eye block, 10 parts of line (standard); 8 t block 170 kg; optional 50 t 480 kg (6 parts) and 100 t 1,030 kg (14 parts)[1] p.18
Outrigger extend / retract timeBeams out 30 s / in 20 s; jacks out 50 s / in 60 s[1] p.18
Control systemCAN bus, 7 in HD colour display, SANY load moment indicator (accuracy 0-3 %); remote control for counterweight, slewing, jib and outriggers[1] p.11

Chassis

Chassis, part 1 of 2
FigureValue (metric)Source
Number of axles5 (10x6x8; axles 3-5 driven, axles 1-2 mechanically steered, axles 4-5 electro-hydraulically steered)[1] p.19
Engine modelWeichai WP12.430N, 6-cyl in-line, turbocharged and intercooled, Euro III[1] p.17
Gross power316 kW (424 hp)At 1,900 rpm[1] p.17
Max torque2,060 NmAt 1,000-1,400 rpm[1] p.17
Fuel tank450 L[1] p.12
TransmissionFAST manual, 10 forward / 2 reverse[1] p.12
Tyres385/95R25 on all axles[1] p.19
Chassis, part 2 of 2
FigureValue (metric)Source
SuspensionIndependent leaf springs front; oscillating leaf-spring balance suspension centre and rear[1] p.19
BrakesDual-circuit air drum brakes with ABS on all axles; spring parking brake on axles 2-5; exhaust brake[1] p.12
SteeringAxles 1-2 mechanical with dual-circuit pumps and emergency pump; axles 4-5 electro-hydraulic[1] p.15
Top speed85 km/h[1] p.17
Gradeability (max)45 %[1] p.17
Fuel consumption per 100 km50 L[1] p.17
Operating temperature range-25 to +45 deg C[1] p.17

Build: SANY STC1600T7 160 t truck crane (5 axles, 7-section oval 14.1-75.5 m boom, Weichai WP12.430N Euro III, up to 52 t counterweight) per SANY's STC1600T7 specification V1.4, SANY Panama dealer-hosted copy. The drawing numbers on the page are ours; the maker's sheet prints the dimensions without letters.

  1. [1]SANY STC1600T7 truck crane specification V1.4, SANY Panama copy

SANY STC1600T7 against its rivals

The mobile cranes nearest in weight from other makers, figure by figure, each shown at the same scale.

SANY STC1600T7, XCMG QY100K5C, Liebherr LTM 1160-5.2, Tadano ATF 220G-5: specifications side by side
FigureSANY STC1600T7this pageXCMG QY100K5C specsLiebherr LTM 1160-5.2 specsTadano ATF 220G-5 specs
Gross power316 kW (424 hp)294 kW (394 hp)400 kW (544 hp)not on its sheet
Max torque2,060 Nm1,900 Nm2,516 Nm2,400 Nm
Fuel tank450 L470 L750 L530 L
Top speed85 km/h80 km/h80 km/h85 km/h
Overall width3 m2.8 m2.75 m3 m
Overall height3.995 m3.886 m3.95 m3.94 m
Every figureFull sheetSANY STC1600T7 vs XCMG QY100K5C

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • The SANY STC1600T7 leads none of these figures, so the choice comes down to price, hours and dealer support.
  • Pick the XCMG QY100K5C if you need a lower machine to move (3.886 m).
  • Pick the Liebherr LTM 1160-5.2 if you need more gross power (400 kW), more torque (2,516 Nm) and a bigger fuel tank (750 L).

SANY STC1600T7 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

No SANY STC1600T7 is listed in the UAE on EquipmentsFinder right now. The prices below are for all mobile cranes, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 30

AED 2,225 /day

No priced SANY STC1600T7 for hire yet: this is all mobile cranes

Low AED 1,000High AED 8,000

No SANY STC1600T7 for rent listed right now.

Request a SANY STC1600T7

Who is asking for mobile cranes in the UAE

Contractors posted 72 requests for mobile cranes on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (33), Abu Dhabi (21) and Sharjah (7). Requests name a kind of machine, not a model, so this counts every mobile crane, the SANY STC1600T7 among them.

Requests, last 12 months
72
For Dubai
33
For Abu Dhabi
21
  • Crawler Cranes Required For RentDubai / 20 November 2026
  • Hiab Crane/Truck Crane 10 Ton or Above Required For RentDubai / 19 November 2026
  • 160 TON Crane Required For PurchaseAbu Dhabi / 18 November 2026

Open mobile crane requests on the Inquiry BoardPost a request for a SANY STC1600T7

Tools for a SANY STC1600T7

For the people who run one: codes, charts and calculators that fit a mobile crane.

Ranked: Mobile cranes by lifting capacity

By maximum lifting capacity, largest first. The SANY STC1600T7 is 12 of 25; every figure is the maker's.

  1. 8Liebherr LTM 1250-5.1250 t
  2. 9Liebherr LTM 1230-5.1230 t
  3. 10Tadano ATF 220G-5220 t
  4. 11Liebherr LTM 1160-5.2180 t
  5. 12SANY STC1600T7This page160 t
  6. 13Liebherr LTM 1100-4.2100 t
  7. 14SANY STC1000T6100 t
  8. 15XCMG QY100K5C100 t
  9. 16Tadano GR-1000XL-490.7 t

Showing 8 to 16 of 25, the machines nearest the SANY STC1600T7 by maximum lifting capacity.

Popular SANY mobile crane models

More SANY STC1600T7 questions

How much does a SANY STC1600T7 weigh?

54.6 tonnes: 54,600 kg (120,372 lb).

How long is the SANY STC1600T7's boom?

The main boom extends to 75.5 m (247 ft 8 in).

How high can a SANY STC1600T7 lift?

Its maximum tip height is 76 m (249 ft 4 in), fully extended main boom.

How much horsepower does the SANY STC1600T7 have?

424 hp (316 kW) gross, At 1,900 rpm.

How heavy is the counterweight on a SANY STC1600T7?

52 t (114,640 lb).

How many axles does a SANY STC1600T7 have?

5 (10x6x8; axles 3-5 driven, axles 1-2 mechanically steered, axles 4-5 electro-hydraulically steered).

What is the outrigger spread of a SANY STC1600T7?

8.1 m (26 ft 7 in) across.

How long is the jib on a SANY STC1600T7?

17.5 m fixed jib, optional 9.5 m extension, offsets 0 / 15 / 30 deg.

How tall is a SANY STC1600T7?

4.00 m (13 ft 1 in) overall.

What are the SANY STC1600T7's main competitors?

The machines nearest it in size are the XCMG QY100K5C, the Liebherr LTM 1500-8.1 and the Liebherr LTM 1100-4.2. Each has a side-by-side comparison on EquipmentsFinder.

Is the SANY STC1600T7 sold in the UAE?

Yes. The SANY STC1600T7 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a SANY STC1600T7 used for?

A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far. Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.

Embed this spec card

The SANY STC1600T7's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/sany-stc1600" title="SANY STC1600T7 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/sany-stc1600">SANY STC1600T7 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a SANY STC1600T7 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.