SANY STC1600T7
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

SANY · mobile crane

SANY STC1600T7

SANY STC1600T7 160 t truck crane (5 axles, 7-section oval 14.1-75.5 m boom, Weichai WP12.430N Euro III, up to 52 t counterweight) per SANY's STC1600T7 specification V1.4, SANY Panama dealer-hosted copy. The drawing numbers on the page are ours; the maker's sheet prints the dimensions without letters.

UAEGlobal

lifting capacity
160 t
Main boom length (m, fully extended)
75.5 m
tip height
76 m
power
316 kW (424 hp)
SANY STC1600T7, side view with dimensions (illustration)4 m16.2 m
SANY STC1600T7, front view (illustration)3 m

Dimensions

Approach angle
17°
Departure angle
17°
Tail slewing radius
4.5 m
Outrigger span, longitudinal (The plan view splits it 4,185 mm + 3,365 mm either side of the slewing centre)
7.55 m
Outrigger span, transverse (max)
8.1 m
Turning radius (vehicle, min)
11 m
Turning radius at boom tip (min) (The drawing on p.16 prints R15,565 for the outermost arc)
15 m
Carrier length (Estimate: front overhang 2.795 m + axle spacings 1.52 / 4.35 / 1.5 / 1.5 m + rear overhang 2.009 m (front bumper to rear of frame))
13.674 mest.

Weight

Gross vehicle weight (Travel configuration without jib, jib bracket, spare tyre, hooks, auxiliary winch, outrigger floats and counterweight)
54,600 kg
Axle load, axles 1 / 2 / 3 / 4 / 5
12 / 12 / 10.2 / 10.2 / 10.2 t
Counterweight (Maximum; 12 combinations 1.3 / 11 / 13.3 / 17.3 / 21.3 / 23 / 27 / 31 / 31.3 / 41 / 42.3 / 52 t, fitted by remote control; the lifting cylinder can shift 550 mm fore and aft to add moment)
52 t
Counterweight carried while travelling (With 4 outrigger pads on board, short distance at low speed (1.3 + 9.7 + 12 t blocks))
23 t

Crane

Max lifting capacity (At 2.5 m minimum rated radius; ratings above 98 t need a higher rope reeving and the 100-130 t hook)
160 t
Main boom length (m, fully extended)
75.5 m
Main boom length retracted (m)
14.1 m
Main boom + jib length
93 m
Main boom + boom extension + jib length (With the optional 9.5 m boom extension)
102.5 m
Boom sections
7, oval cross-section, single-cylinder pin telescoping with one-key extension
Max tip height (Fully extended main boom)
76 m
Max tip height with jib
93 m
Max tip height with boom extension and jib
102.5 m
Jib
17.5 m fixed jib, optional 9.5 m extension, offsets 0 / 15 / 30 deg
Max load moment, basic boom
5,145 kN.m
Max load moment, fully extended boom
2,234 kN.m
Max load moment, boom + jib
1,019 kN.m
Max load moment, boom + extension + jib
646 kN.m
Max load at fully extended boom
9.2 t
Rated capacity, 14.1 m boom at 5 m radius (52 t counterweight in the normal (front) position, outriggers fully extended, over 360 deg, 100 % chart)
97 t
Rated capacity, 14.1 m boom at 10 m radius (Same chart)
47.5 t
Rated capacity, 75.5 m boom at 16 m radius (Same chart)
9.2 t
Rated capacity, 75.5 m boom at 30 m radius (Same chart)
7.3 t
Boom elevation angle
0 to 80 deg
Boom raising / lowering time
70 s / 100 s
Boom extension / retraction time
630 s / 650 s
Main winch single-line speed
0-135 m/min, no load
Auxiliary winch single-line speed
0-135 m/min, no load (optional winch)
Max single line pull (Both winches)
7.5 t
Main winch rope
20 mm x 370 m
Auxiliary winch rope
20 mm x 215 m
Slewing speed (Minimum stable slewing speed below 0.1 deg/s; minimum single-line hoist speed 1.5 m/min or less)
1.5 rpm (max)
Hook block weight (75 t double-eye block, 10 parts of line (standard); 8 t block 170 kg; optional 50 t 480 kg (6 parts) and 100 t 1,030 kg (14 parts))
735 kg
Outrigger extend / retract time
Beams out 30 s / in 20 s; jacks out 50 s / in 60 s
Control system
CAN bus, 7 in HD colour display, SANY load moment indicator (accuracy 0-3 %); remote control for counterweight, slewing, jib and outriggers

Chassis

Number of axles
5 (10x6x8; axles 3-5 driven, axles 1-2 mechanically steered, axles 4-5 electro-hydraulically steered)
Engine model
Weichai WP12.430N, 6-cyl in-line, turbocharged and intercooled, Euro III
Gross power (At 1,900 rpm)
316 kW (424 hp)
Max torque (At 1,000-1,400 rpm)
2,060 Nm
Fuel tank
450 L
Transmission
FAST manual, 10 forward / 2 reverse
Tyres
385/95R25 on all axles
Suspension
Independent leaf springs front; oscillating leaf-spring balance suspension centre and rear
Brakes
Dual-circuit air drum brakes with ABS on all axles; spring parking brake on axles 2-5; exhaust brake
Steering
Axles 1-2 mechanical with dual-circuit pumps and emergency pump; axles 4-5 electro-hydraulic
Top speed
85 km/h
Gradeability (max)
45 %
Fuel consumption per 100 km
50 L
Operating temperature range
-25 to +45 deg C