EF Logo

mobile cranemade by SANYUAE, Global

SANY STC800C5Specs and dimensions

Max lifting capacity
80 t
176,370 lb
Main boom, extended
50.5 m
165 ft 8 in
Engine
DF Cummins ISLe375 30

Quick answer

The SANY STC800C5 is a mobile crane with a DF Cummins ISLe375 30 engine rated at 275 kW (369 hp). It lifts up to 80 t, reaches a tip height of 51 m and drives at up to 90 km/h. It suits lifting steel, precast and plant on building sites. People compare it with the XCMG QY100K5C (100 t) and the Zoomlion ZTC800V532 (80 t).

SANY STC800C5 (illustration)

What engine is in the SANY STC800C5?

The SANY STC800C5 has a DF Cummins ISLe375 30 engine rated at 275 kW (369 hp) gross, at 2,100 rpm. It makes 1,550 Nm (1,143 lbf·ft) of torque. The fuel tank holds 400 L (106 US gal). The figures are from SANY STC800C5 truck crane specification V1.5, SANY Panama copy.

Cummins fault codes

How much can a SANY STC800C5 lift?

The SANY STC800C5 lifts up to 80 t, reaches a tip height of 51 m and drives at up to 90 km/h. In imperial units the lifting capacity is 176,370 lb. The sheet notes: at 3 m radius (minimum rated radius). On the same row of their sheets, the XCMG QY100K5C shows 100 t and the Zoomlion ZTC800V532 shows 80 t.

What are the SANY STC800C5 dimensions?

The SANY STC800C5 is 15.00 m (49 ft 3 in) long, 2.80 m (9 ft 2 in) wide and 3.91 m (12 ft 10 in) high. As it stands it is too big for the door of a standard shipping container. The XCMG QY100K5C is 14.98 m long, 2.80 m wide and 3.89 m high.

SANY STC800C5 vs XCMG QY100K5C: what is the difference?

The SANY STC800C5 and the XCMG QY100K5C are both mobile cranes; this is where their sheets differ. The SANY STC800C5 is faster (90 km/h against 80 km/h). The XCMG QY100K5C has more gross power (294 kW against 275 kW), has more torque (1,900 Nm against 1,550 Nm) and carries more fuel (470 L against 400 L).

SANY STC800C5 vs XCMG QY100K5C, every figure

SANY STC800C5 dimensions

SANY STC800C5, side view with dimensions (illustration)3.91 m15 m
Side view
SANY STC800C5, front view (illustration)2.8 m
Front view
Overall height
3.91 m
Overall length
15 m
Overall width
2.8 m

Illustration; figures from the maker's sheet.

How big is the SANY STC800C5?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

SANY STC800C5 drawn to scale beside a person, a pickup truck and a 40 ft container. The SANY STC800C5 is 15 m long - about 1.2 forty-foot containers - and 3.91 m tall, 2.2 times a person's height.SANY STC800C515 × 3.91 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The SANY STC800C5 is 15 m long - about 1.2 forty-foot containers - and 3.91 m tall, 2.2 times a person's height.

SANY STC800C5 load chart

What it lifts as the radius grows, from the maker’s chart. Not for lift planning.

  1. 80 t3 m12.9 m boom
  2. 26.5 t10 m22.3 m boom
  3. 9.2 t20 m27 m boom
  4. 4.6 t30 m41.1 m boom

Every radius and boom length, 4 configurations, with a reader.

Full load chart

SANY STC800C5 specifications

Figures are the maker's unless marked: est. is our estimate, and any figure from another site names it. Each links to where it came from. Sheet last updated 17 November 2026.

59 figures in 4 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length15 m[1] p.9
Overall width2.8 m[1] p.9
Overall height3.91 m[1] p.9
Ground clearance (minimum)0.316 m[1] p.9
Front extension (boom nose to bumper)2.271 m[1] p.8
Front overhang2.87 m[1] p.8
Axle spacing, axles 1-21.52 m[1] p.8
Axle spacing, axles 2-34.38 m[1] p.8
Axle spacing, axles 3-41.35 m[1] p.8
Rear overhang2.525 m[1] p.8
Dimensions, part 2 of 2
FigureValue (metric)Source
Rear extension (beyond frame)0.084 m[1] p.8
Approach angle17°[1] p.9
Departure angle13°[1] p.9
Tail slewing radius4.238 m[1] p.9
Outrigger span, longitudinal6.48 m[1] p.9
Outrigger span, transverse (max)8 m[1] p.9
Turning radius (vehicle, min)12 m[1] p.9
Turning radius at boom tip (min)15.4 m[1] p.9
Carrier length12.645 mest.Estimate: front overhang 2.87 m + axle spacings 1.52 / 4.38 / 1.35 m + rear overhang 2.525 m (front bumper to rear of frame)[1] p.8

Weight

Weight
FigureValue (metric)Source
Gross vehicle weight46,000 kgMain hook tied on frame tail, auxiliary hook in bracket, with outrigger floats and spare tyre, one person in cab, full water and oil; no counterweight[1] p.10
Axle load, axles 1 / 2 / 3 / 410 / 10 / 13 / 13 t[1] p.10
Counterweight18 t3.2 t fixed + 8.8 t movable + optional 6 t; combinations 3.2 / 9.2 / 12 / 18 t[1] p.11

Crane

Crane, part 1 of 2
FigureValue (metric)Source
Max lifting capacity80 tAt 3 m radius (minimum rated radius)[1] p.9
Main boom length (m, fully extended)50.5 m[1] p.9
Main boom length retracted (m)12.9 m[1] p.9
Main boom + jib length66.5 m[1] p.9
Boom sections5, U-shaped, two cylinders plus ropes[1] p.13
Max tip height51 mFully extended main boom[1] p.9
Max tip height with jib66.5 m[1] p.9
Jib16 m bi-fold jib (9.2 m + 16 m configurations), offsets 0 / 15 / 30 deg[1] p.9
Max load moment, basic boom2,881 kN.m standard counterweight; 2,940 kN.m with full counterweight[1] p.9
Max load moment, fully extended boom1,568 kN.m standard; 1,666 kN.m full counterweight[1] p.9
Max load moment, boom + jib557 kN.m standard; 606 kN.m full counterweight[1] p.9
Rated capacity, 12.9 m boom at 3 m radius80 t18 t counterweight, 360 deg[1] p.15
Crane, part 2 of 2
FigureValue (metric)Source
Boom elevation angle-1 to 80 deg[1] p.13
Boom raising / lowering time60 s / 90 s[1] p.10
Boom extension / retraction time100 s / 110 s[1] p.10
Main winch single-line speed0-130 m/min, no load[1] p.10
Auxiliary winch single-line speed0-130 m/min, no load[1] p.10
Max single line pull5.8 tBoth winches[1] p.10
Main winch rope18 mm x 260 m[1] p.10
Auxiliary winch rope18 mm x 145 m[1] p.10
Slewing speed0-1.7 rpmMinimum stable slewing speed below 0.15 deg/s[1] p.10
Hook block weight700 kg80 t block, 7 sheaves, 14 parts of line; 60 t block 550 kg (12 parts); 6 t block 120 kg[1] p.10
Outrigger extend / retract timeBeams out 25 s / in 20 s; jacks out 35 s / in 35 s[1] p.10

Chassis

Chassis, part 1 of 2
FigureValue (metric)Source
Number of axles4 (8x4x4; axles 1-2 steered, axles 3-4 driven)[1] p.12
Engine modelDF Cummins ISLe375 30, 6-cyl in-line, turbocharged and intercooled, Euro III[1] p.9
Gross power275 kW (369 hp)At 2,100 rpm[1] p.9
Max torque1,550 NmAt 1,200 rpm[1] p.9
Fuel tank400 L[1] p.12
TransmissionManual with synchronizer, 10 forward gears[1] p.12
Tyres325/95R24 radial[1] p.12
Chassis, part 2 of 2
FigureValue (metric)Source
SuspensionIndependent leaf springs front; rubber suspension rear[1] p.12
BrakesDual-circuit air service brake, large disc brakes on the front axles; spring parking brake on axles 3-4; accumulator emergency brake; exhaust brake[1] p.12
SteeringMechanical with hydraulic booster[1] p.12
Top speed90 km/h[1] p.9
Gradeability (max)44 %[1] p.9
Fuel consumption per 100 km45 L[1] p.9
Operating temperature range-25 to +45 deg C[1] p.9

Build: SANY STC800C5 80 t truck crane (5-section U-shaped 12.9-50.5 m boom, 8x4x4 chassis, DF Cummins ISLe375 30 Euro III, 3.2 t fixed + 8.8 t movable counterweight) per SANY's STC800C5 specification V1.5, SANY Panama dealer-hosted copy. The drawing numbers on the page are ours; the maker's sheet prints the dimensions without letters.

  1. [1]SANY STC800C5 truck crane specification V1.5, SANY Panama copy

SANY STC800C5 against its rivals

The mobile cranes nearest in weight from other makers, figure by figure, each shown at the same scale.

SANY STC800C5, XCMG QY100K5C, Zoomlion ZTC800V532, XCMG XCT80: specifications side by side
FigureSANY STC800C5this pageXCMG QY100K5C specsZoomlion ZTC800V532 specsXCMG XCT80 specs
Gross power275 kW (369 hp)294 kW (394 hp)not on its sheet276 kW (370 hp)
Max torque1,550 Nm1,900 Nmnot on its sheet1,560 Nm
Fuel tank400 L470 Lnot on its sheetnot on its sheet
Top speed90 km/h80 km/h85 km/h80 km/h
Turning radius at boom tip (min)15.4 mnot on its sheetnot on its sheet14.95 m
Overall width2.8 m2.8 m2.8 m2.75 m
Overall height3.91 m3.886 m3.85 m3.91 m
Every figureFull sheetSANY STC800C5 vs XCMG QY100K5C

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the SANY STC800C5 if you need more speed (90 km/h).
  • Pick the XCMG QY100K5C if you need more gross power (294 kW), more torque (1,900 Nm) and a bigger fuel tank (470 L).
  • Pick the Zoomlion ZTC800V532 if you need a lower machine to move (3.85 m).
  • Pick the XCMG XCT80 if you need a tighter turn (14.95 m) and a narrower machine to move (2.75 m).

SANY STC800C5 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

SANY STC800C5 on EquipmentsFinder in the UAE now: none for rent, 3 listed for sale. Too few carry a price to give a SANY STC800C5 range, so the figure below is for all mobile cranes.

See all 3

Typical asking price, usedmedian of 16

AED 275,000

No priced SANY STC800C5 for sale yet: this is all mobile cranes

Low AED 45,000High AED 1,200,000

Who is asking for mobile cranes in the UAE

Contractors posted 72 requests for mobile cranes on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (33), Abu Dhabi (21) and Sharjah (7). Requests name a kind of machine, not a model, so this counts every mobile crane, the SANY STC800C5 among them.

Requests, last 12 months
72
For Dubai
33
For Abu Dhabi
21
  • Crawler Cranes Required For RentDubai / 20 November 2026
  • Hiab Crane/Truck Crane 10 Ton or Above Required For RentDubai / 19 November 2026
  • 160 TON Crane Required For PurchaseAbu Dhabi / 18 November 2026

Open mobile crane requests on the Inquiry BoardPost a request for a SANY STC800C5

Tools for a SANY STC800C5

For the people who run one: codes, charts and calculators that fit a mobile crane.

Ranked: Mobile cranes by lifting capacity

By maximum lifting capacity, largest first. The SANY STC800C5 is 18 of 25; every figure is the maker's.

  1. 14SANY STC1000T6100 t
  2. 15XCMG QY100K5C100 t
  3. 16Tadano GR-1000XL-490.7 t
  4. 17Liebherr LTM 1090-4.290 t
  5. 18SANY STC800C5This page80 t
  6. 19XCMG XCT8080 t
  7. 20Zoomlion ZTC800V53280 t
  8. 21Liebherr LTM 1060-3.160 t
  9. 22Tadano GR-500EXL51 t

Showing 14 to 22 of 25, the machines nearest the SANY STC800C5 by maximum lifting capacity.

Popular SANY mobile crane models

SANY STC800C5 fault codes and serial number

More SANY STC800C5 questions

How much does a SANY STC800C5 weigh?

46 tonnes: 46,000 kg (101,413 lb).

How long is the SANY STC800C5's boom?

The main boom extends to 50.5 m (165 ft 8 in).

How high can a SANY STC800C5 lift?

Its maximum tip height is 51 m (167 ft 4 in), fully extended main boom.

How much horsepower does the SANY STC800C5 have?

369 hp (275 kW) gross, At 2,100 rpm.

How heavy is the counterweight on a SANY STC800C5?

18 t (39,683 lb).

How many axles does a SANY STC800C5 have?

4 (8x4x4; axles 1-2 steered, axles 3-4 driven).

What is the outrigger spread of a SANY STC800C5?

8 m (26 ft 3 in) across.

How long is the jib on a SANY STC800C5?

16 m bi-fold jib (9.2 m + 16 m configurations), offsets 0 / 15 / 30 deg.

How tall is a SANY STC800C5?

3.91 m (12 ft 10 in) overall.

What are the SANY STC800C5's main competitors?

The machines nearest it in size are the XCMG QY100K5C, the Liebherr LTM 1500-8.1 and the Liebherr LTM 1100-4.2. Each has a side-by-side comparison on EquipmentsFinder.

Is the SANY STC800C5 sold in the UAE?

Yes. The SANY STC800C5 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a SANY STC800C5 used for?

A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far. Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.

Embed this spec card

The SANY STC800C5's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/sany-stc800" title="SANY STC800C5 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/sany-stc800">SANY STC800C5 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a SANY STC800C5 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.