SANY STC800C5
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

SANY · mobile crane

SANY STC800C5

SANY STC800C5 80 t truck crane (5-section U-shaped 12.9-50.5 m boom, 8x4x4 chassis, DF Cummins ISLe375 30 Euro III, 3.2 t fixed + 8.8 t movable counterweight) per SANY's STC800C5 specification V1.5, SANY Panama dealer-hosted copy. The drawing numbers on the page are ours; the maker's sheet prints the dimensions without letters.

UAEGlobal

lifting capacity
80 t
Main boom length (m, fully extended)
50.5 m
tip height
51 m
power
275 kW (369 hp)
SANY STC800C5, side view with dimensions (illustration)3.91 m15 m
SANY STC800C5, front view (illustration)2.8 m

Dimensions

Rear extension (beyond frame)
0.084 m
Approach angle
17°
Departure angle
13°
Tail slewing radius
4.238 m
Outrigger span, longitudinal
6.48 m
Outrigger span, transverse (max)
8 m
Turning radius (vehicle, min)
12 m
Turning radius at boom tip (min)
15.4 m
Carrier length (Estimate: front overhang 2.87 m + axle spacings 1.52 / 4.38 / 1.35 m + rear overhang 2.525 m (front bumper to rear of frame))
12.645 mest.

Weight

Gross vehicle weight (Main hook tied on frame tail, auxiliary hook in bracket, with outrigger floats and spare tyre, one person in cab, full water and oil; no counterweight)
46,000 kg
Axle load, axles 1 / 2 / 3 / 4
10 / 10 / 13 / 13 t
Counterweight (3.2 t fixed + 8.8 t movable + optional 6 t; combinations 3.2 / 9.2 / 12 / 18 t)
18 t

Crane

Max lifting capacity (At 3 m radius (minimum rated radius))
80 t
Main boom length (m, fully extended)
50.5 m
Main boom length retracted (m)
12.9 m
Main boom + jib length
66.5 m
Boom sections
5, U-shaped, two cylinders plus ropes
Max tip height (Fully extended main boom)
51 m
Max tip height with jib
66.5 m
Jib
16 m bi-fold jib (9.2 m + 16 m configurations), offsets 0 / 15 / 30 deg
Max load moment, basic boom
2,881 kN.m standard counterweight; 2,940 kN.m with full counterweight
Max load moment, fully extended boom
1,568 kN.m standard; 1,666 kN.m full counterweight
Max load moment, boom + jib
557 kN.m standard; 606 kN.m full counterweight
Rated capacity, 12.9 m boom at 3 m radius (18 t counterweight, 360 deg)
80 t
Boom elevation angle
-1 to 80 deg
Boom raising / lowering time
60 s / 90 s
Boom extension / retraction time
100 s / 110 s
Main winch single-line speed
0-130 m/min, no load
Auxiliary winch single-line speed
0-130 m/min, no load
Max single line pull (Both winches)
5.8 t
Main winch rope
18 mm x 260 m
Auxiliary winch rope
18 mm x 145 m
Slewing speed (Minimum stable slewing speed below 0.15 deg/s)
0-1.7 rpm
Hook block weight (80 t block, 7 sheaves, 14 parts of line; 60 t block 550 kg (12 parts); 6 t block 120 kg)
700 kg
Outrigger extend / retract time
Beams out 25 s / in 20 s; jacks out 35 s / in 35 s

Chassis

Number of axles
4 (8x4x4; axles 1-2 steered, axles 3-4 driven)
Engine model
DF Cummins ISLe375 30, 6-cyl in-line, turbocharged and intercooled, Euro III
Gross power (At 2,100 rpm)
275 kW (369 hp)
Max torque (At 1,200 rpm)
1,550 Nm
Fuel tank
400 L
Transmission
Manual with synchronizer, 10 forward gears
Tyres
325/95R24 radial
Suspension
Independent leaf springs front; rubber suspension rear
Brakes
Dual-circuit air service brake, large disc brakes on the front axles; spring parking brake on axles 3-4; accumulator emergency brake; exhaust brake
Steering
Mechanical with hydraulic booster
Top speed
90 km/h
Gradeability (max)
44 %
Fuel consumption per 100 km
45 L
Operating temperature range
-25 to +45 deg C