Specification sheetIssued 20 November 2026
SANY · mobile crane
SANY STC800C5
SANY STC800C5 80 t truck crane (5-section U-shaped 12.9-50.5 m boom, 8x4x4 chassis, DF Cummins ISLe375 30 Euro III, 3.2 t fixed + 8.8 t movable counterweight) per SANY's STC800C5 specification V1.5, SANY Panama dealer-hosted copy. The drawing numbers on the page are ours; the maker's sheet prints the dimensions without letters.
UAEGlobal
- lifting capacity
- 176,370 lb
- Main boom length (m, fully extended)
- 165 ft 8 in
- tip height
- 167 ft 4 in
- power
- 369 hp
12.8 ft49.2 ft
9.2 ftDimensions
- Rear extension (beyond frame)
- 0 ft 3 in
- Approach angle
- 17°
- Departure angle
- 13°
- Tail slewing radius
- 13 ft 11 in
- Outrigger span, longitudinal
- 21 ft 3 in
- Outrigger span, transverse (max)
- 26 ft 3 in
- Turning radius (vehicle, min)
- 39 ft 4 in
- Turning radius at boom tip (min)
- 50 ft 6 in
- Carrier length (Estimate: front overhang 2.87 m + axle spacings 1.52 / 4.38 / 1.35 m + rear overhang 2.525 m (front bumper to rear of frame))
- 41.5 ftest.
Weight
- Gross vehicle weight (Main hook tied on frame tail, auxiliary hook in bracket, with outrigger floats and spare tyre, one person in cab, full water and oil; no counterweight)
- 101,413 lb
- Axle load, axles 1 / 2 / 3 / 4
- 10 / 10 / 13 / 13 t
- Counterweight (3.2 t fixed + 8.8 t movable + optional 6 t; combinations 3.2 / 9.2 / 12 / 18 t)
- 39,683 lb
Crane
- Max lifting capacity (At 3 m radius (minimum rated radius))
- 176,370 lb
- Main boom length (m, fully extended)
- 165 ft 8 in
- Main boom length retracted (m)
- 42 ft 4 in
- Main boom + jib length
- 218 ft 2 in
- Boom sections
- 5, U-shaped, two cylinders plus ropes
- Max tip height (Fully extended main boom)
- 167 ft 4 in
- Max tip height with jib
- 218 ft 2 in
- Jib
- 16 m bi-fold jib (9.2 m + 16 m configurations), offsets 0 / 15 / 30 deg
- Max load moment, basic boom
- 2,881 kN.m standard counterweight; 2,940 kN.m with full counterweight
- Max load moment, fully extended boom
- 1,568 kN.m standard; 1,666 kN.m full counterweight
- Max load moment, boom + jib
- 557 kN.m standard; 606 kN.m full counterweight
- Rated capacity, 12.9 m boom at 3 m radius (18 t counterweight, 360 deg)
- 176,370 lb
- Boom elevation angle
- -1 to 80 deg
- Boom raising / lowering time
- 60 s / 90 s
- Boom extension / retraction time
- 100 s / 110 s
- Main winch single-line speed
- 0-130 m/min, no load
- Auxiliary winch single-line speed
- 0-130 m/min, no load
- Max single line pull (Both winches)
- 12,875 lb
- Main winch rope
- 18 mm x 260 m
- Auxiliary winch rope
- 18 mm x 145 m
- Slewing speed (Minimum stable slewing speed below 0.15 deg/s)
- 0-1.7 rpm
- Hook block weight (80 t block, 7 sheaves, 14 parts of line; 60 t block 550 kg (12 parts); 6 t block 120 kg)
- 1,543 lb
- Outrigger extend / retract time
- Beams out 25 s / in 20 s; jacks out 35 s / in 35 s
Chassis
- Number of axles
- 4 (8x4x4; axles 1-2 steered, axles 3-4 driven)
- Engine model
- DF Cummins ISLe375 30, 6-cyl in-line, turbocharged and intercooled, Euro III
- Gross power (At 2,100 rpm)
- 369 hp
- Max torque (At 1,200 rpm)
- 1,143 lbf·ft
- Fuel tank
- 106 US gal
- Transmission
- Manual with synchronizer, 10 forward gears
- Tyres
- 325/95R24 radial
- Suspension
- Independent leaf springs front; rubber suspension rear
- Brakes
- Dual-circuit air service brake, large disc brakes on the front axles; spring parking brake on axles 3-4; accumulator emergency brake; exhaust brake
- Steering
- Mechanical with hydraulic booster
- Top speed
- 55.9 mph
- Gradeability (max)
- 44 %
- Fuel consumption per 100 km
- 12 US gal
- Operating temperature range
- -25 to +45 deg C