EF Logo

mobile cranemade by TadanoUAE, Global

Tadano GR-1000XL-4Specs and dimensions

Max lifting capacity
90.7 t
100 US tons
Main boom, extended
47 m
154.2 ft
Engine
Cummins B6.7

Quick answer

The Tadano GR-1000XL-4 is a mobile crane with a Cummins B6.7 engine rated at 209 kW (280 hp). It lifts up to 90.7 t, reaches a tip height of 47.1 m and drives at up to 36 km/h. It suits lifting steel, precast and plant on building sites and erecting tower cranes and site cabins. Its rivals include the Grove RT540E (35 t) and the Liebherr LTM 1090-4.2 (90 t).

Tadano GR-1000XL-4 (illustration)

What engine is in the Tadano GR-1000XL-4?

The Tadano GR-1000XL-4 has a Cummins B6.7 engine rated at 209 kW (280 hp) gross, at 2,200 rpm. It displaces 6.7 L (409 cu in) and makes 1,152 Nm (850 lbf-ft) of torque. The fuel tank holds 300 L (79.2 gal) and the engine takes 15 L (4.0 gal) of oil.

Cummins fault codes

How much can a Tadano GR-1000XL-4 lift?

The Tadano GR-1000XL-4 lifts up to 90.7 t, reaches a tip height of 47.1 m and drives at up to 36 km/h. In imperial units the lifting capacity is 100 US tons. The sheet notes: rated capacity. On the same row of their sheets, the Grove RT540E shows 35 t and the Liebherr LTM 1090-4.2 shows 90 t.

What are the Tadano GR-1000XL-4 dimensions?

The Tadano GR-1000XL-4 is 14.38 m (47 ft 2 in) long, 3.31 m (10 ft 11 in) wide and 3.81 m (12 ft 6 in) high. As it stands it is too big for the door of a standard shipping container. The Grove RT540E is 11.94 m long, 2.61 m wide and 3.23 m high.

Tadano GR-1000XL-4 vs Grove RT540E: what is the difference?

The Tadano GR-1000XL-4 and the Grove RT540E are both mobile cranes; this is where their sheets differ. The Tadano GR-1000XL-4 has more torque (1,152 Nm against 731 Nm) and carries more fuel (300 L against 219 L). The Grove RT540E is faster (40 km/h against 36 km/h), is narrower to transport (2.606 m against 3.315 m) and is lower to transport (3.235 m against 3.805 m).

Tadano GR-1000XL-4 dimensions

Tadano GR-1000XL-4, side view with dimensions (illustration)3.81 m14.4 m
Side view
Tadano GR-1000XL-4, front view (illustration)3.32 m
Front view
Overall height
3.81 m
Overall length
14.4 m
Overall width
3.32 m

Illustration; figures from the maker's sheet.

How big is the Tadano GR-1000XL-4?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Tadano GR-1000XL-4 drawn to scale beside a person, a pickup truck and a 40 ft container. The Tadano GR-1000XL-4 is 14.38 m long - about 1.2 forty-foot containers - and 3.81 m tall, 2.2 times a person's height.Tadano GR-1000XL-414.38 × 3.81 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Tadano GR-1000XL-4 is 14.38 m long - about 1.2 forty-foot containers - and 3.81 m tall, 2.2 times a person's height.

Tadano GR-1000XL-4 load chart

What it lifts as the radius grows, from the maker’s chart. Not for lift planning.

  1. 90.7 t2.4 m12 m boom
  2. 45 t6.1 m16.4 m boom
  3. 15.1 t12.2 m20.8 m boom
  4. 15.6 t12.2 m20.8 m boom
  5. 7.2 t18.3 m25.1 m boom
  6. 7.5 t18.3 m25.1 m boom

Every radius and boom length, 4 configurations, with a reader.

Full load chart

Tadano GR-1000XL-4 specifications

Figures are the maker's unless marked: est. is our estimate, and any figure from another site names it. Each links to where it came from. Sheet last updated 18 November 2026.

64 figures in 4 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length14.375 mApprox., boom angle -1.5 deg[1] p.1
Overall width3.315 mApprox., outriggers retracted, with floats[1] p.1
Overall height3.805 mApprox.[1] p.1
Boom head to front axle8.02 m[1] p.1
Wheelbase3.95 m[1] p.1
Rear overhang (rear axle to end)2.405 m[1] p.1
Carrier length8.58 mFront of carrier frame to rear end[1] p.1
Ground clearance (minimum)0.46 mUnder the front outrigger float[1] p.1
Slewing centre to rear axle1.875 m[1] p.1
Front outrigger to slewing centre3.55 mCentre of front outrigger jack[1] p.1
Dimensions, part 2 of 2
FigureValue (metric)Source
Slewing centre to rear outrigger3.78 mCentre of rear outrigger jack[1] p.1
Tail slewing radius4.19 mSmart Counterweight 1 (front position); 4.79 m with Smart Counterweight 2 (rear position)[1] p.1
Angle of approach16°[1] p.1
Angle of departure14°[1] p.1
Turning radius, 4-wheel steer6.8 m29.5-25 tyres, outside of the tyre track[1] p.1
Turning radius, 2-wheel steer10.9 m29.5-25 tyres[1] p.1
Outrigger span, transverse (max)7.3 mSelectable 2.7 / 5.5 / 6.7 / 7.3 m centre to centre[1] p.3
Outrigger float diameter0.6 m[1] p.3
Outrigger span, longitudinal7.33 mest.Estimate: front outrigger to slewing centre 3.55 m + slewing centre to rear outrigger 3.78 m[1] p.1
Boom head to front of carrier5.795 mest.Estimate: boom head to front axle 8.02 m minus front overhang 2.225 m (carrier length 8.58 m less wheelbase 3.95 m and rear overhang 2.405 m)[1] p.1

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Gross vehicle weight53,170 kgBase machine with all removable items (hook blocks, jib, 9,100 kg counterweight); 26,520 kg front and 26,650 kg rear axle[1] p.21
Gross vehicle weight, without counterweight44,070 kgBrochure road weight; counterweight removed (9,100 kg; front axle +3,490 kg, rear axle -12,590 kg when removed)[2] p.15
Counterweight9,100 kgSelf-removable; Smart Counterweight mounts at the front (CW1) or rear (CW2)[1] p.2
Weight, part 2 of 2
FigureValue (metric)Source
Hook block, 100 ton850 kg8 sheaves; 7.3 ton weighted hook 165 kg (360 lb)[1] p.21
Bi-fold jib weight867 kgBase jib; top jib 336 kg (740 lb)[1] p.21

Crane

Crane, part 1 of 2
FigureValue (metric)Source
Max lifting capacity90.7 tRated capacity[1] p.1
Main boom length (m, fully extended)47 m[1] p.2
Main boom length retracted (m)12 m[1] p.2
Boom sections5, full power, partially synchronized (2 telescope cylinders with extension and retraction cables); two telescoping modes[1] p.2
Max tip height47.1 mMain boom; 64.4 m (211.3 ft) with jib[2] p.7
Max load radius, boom44.2 m[2] p.7
Max load radius, jib54.6 mWith the 17.7 m jib[2] p.7
Jib2-stage bi-fold lattice, 10.1 m / 17.7 m, 3.5 / 25 / 45 deg offset, assist cylinders for mounting[1] p.2
Counterweight carried9.1 t self-removable counterweight; operation without it is prohibited[1] p.18
Boom elevation angle-1.5 to +80.5 deg[1] p.2
Crane, part 2 of 2
FigureValue (metric)Source
Boom raising time20 to 60 deg in 46 s[1] p.2
Boom extension time35.0 m (114.8 ft) in 155 s[1] p.2
Slewing speed1.5 rpm, 360 deg continuous, twin slewing system with 360 deg positive slewing lock[1] p.2
Hoist single-line speedMain and auxiliary: 84 m/min low / 118 m/min high on the 1st layer, up to 130 / 181 m/min on the 7th layer[1] p.4
Max single line pull9,090 kg1st layer, low speed; 6,520 kgf (14,400 lb) at high speed; rope-limited pull 6,600 kg[1] p.4
Hoist rope19 mm non-rotating; main drum 253 m, auxiliary drum 139 m; drum 362 mm root diameter x 681 mm wide, 346 m storage over 7 layers[1] p.2
Hydraulic tank capacity795 L[1] p.2
Crane hydraulic pumps2 variable piston pumps for crane functions, tandem gear pump for steering, slewing and auxiliary systems[1] p.2
Load moment indicatorTadano AML-E2 with Smart Chart (outrigger width detection, asymmetric extension)[1] p.3

Chassis

Chassis, part 1 of 2
FigureValue (metric)Source
Drive / steer4x4x4; 4x2 front drive or 4x4 selected by switch; 4 steering modes (2-wheel front, 2-wheel rear, 4-wheel coordinated, crab)[1] p.3
Engine modelCummins B6.7, 6-cyl, 4-stroke direct-injection diesel, turbocharged and aftercooled; 107 x 124 mm bore and stroke[1] p.3
Displacement6.7 L[1] p.3
Gross power209 kW (280 hp)At 2,200 rpm[1] p.3
Max torque1,152 NmAt 1,500 rpm[1] p.3
Fuel tank300 LRight side of carrier[1] p.3
DEF/AdBlue tank57 L[1] p.3
Engine oil capacity15 L[1] p.3
Cooling system capacity10 L[1] p.3
Electrical system24 V system, two 120 Ah batteries; air compressor 17.0 CFM (481 L/min) at 2,400 rpm[1] p.3
Chassis, part 2 of 2
FigureValue (metric)Source
TransmissionElectronically controlled full automatic powershift with torque converter, 6 forward / 2 reverse; 3 high-range speeds (2WD or 4WD) and 3 low-range speeds (4WD)[1] p.3
Top speed36 km/h[1] p.3
Gradeability (max)93 % at stall, 57 % within the engine crankcase limit (30 deg)[1] p.3
AxlesFront and rear full-floating steer/drive axles with planetary reduction; non-spin rear differential[1] p.3
SuspensionFront rigid mounted to the frame; rear pivot mounted with hydraulic lockout[1] p.3
Tyres29.5-25 36PR or 40PR (OR); 470 kPa (68 psi) and 465 kPa (67 psi)[1] p.3
BrakesAir-over-hydraulic disc brakes on all 4 wheels; spring-applied parking brake on the front axle input shaft; electro-pneumatic exhaust brake[1] p.3
Outriggers4 hydraulic beam-and-jack outriggers, independently controlled from the cab, self-attaching floats of 0.6 m diameter[1] p.3
SteeringHydraulic power steering; four modes: 2-wheel front, 2-wheel rear, 4-wheel coordinated and 4-wheel crab[1] p.3
Number of axles2; front and rear full-floating steering and driving axles with planetary reduction (4x4x4)[1] p.3

Build: Tadano GR-1000XL-4, 100 US ton (90.7 t) 2-axle rough terrain crane, left-hand drive, 12.0-47.0 m five-section boom, Cummins B6.7 280 hp engine, 29.5-25 tyres, 9.1 t self-removable counterweight, per Tadano's North American specification GR-1000-4-00103/US-01 (imperial with metric values) and the Tadano America brochure; the 51 m GR-1000XLL-4 and the GR-800XL-4 are not covered.

  1. [1]Tadano GR-1000XL-4 specification GR-1000-4-00103/US-01 (Tadano)
  2. [2]Tadano GR-1000XLL-4 / GR-1000XL-4 / GR-800XL-4 brochure (Tadano America, Maxim Crane-hosted copy)

Tadano GR-1000XL-4 against its rivals

The mobile cranes nearest in weight from other makers, figure by figure, each shown at the same scale.

Tadano GR-1000XL-4, Grove RT540E, Liebherr LTM 1090-4.2, XCMG QY100K5C: specifications side by side
FigureTadano GR-1000XL-4this pageGrove RT540E specsLiebherr LTM 1090-4.2 specsXCMG QY100K5C specs
Gross power209 kW (280 hp)not on its sheet330 kW (449 hp)294 kW (394 hp)
Max torque1,152 Nm731 Nm2,335 Nm1,900 Nm
Fuel tank300 L219 L550 L470 L
Top speed36 km/h40 km/h80 km/h80 km/h
Overall width3.315 m2.606 m2.55 m2.8 m
Overall height3.805 m3.235 m3.95 m3.886 m
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • The Tadano GR-1000XL-4 leads none of these figures, so the choice comes down to price, hours and dealer support.
  • Pick the Grove RT540E if you need a lower machine to move (3.235 m).
  • Pick the Liebherr LTM 1090-4.2 if you need more gross power (330 kW), more torque (2,335 Nm) and a bigger fuel tank (550 L).

Tadano GR-1000XL-4 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

No Tadano GR-1000XL-4 is listed in the UAE on EquipmentsFinder right now. The prices below are for all mobile cranes, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 30

AED 2,225 /day

No priced Tadano GR-1000XL-4 for hire yet: this is all mobile cranes

Low AED 1,000High AED 8,000

No Tadano GR-1000XL-4 for rent listed right now.

Request a Tadano GR-1000XL-4

Who is asking for mobile cranes in the UAE

Contractors posted 72 requests for mobile cranes on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (33), Abu Dhabi (21) and Sharjah (7). Requests name a kind of machine, not a model, so this counts every mobile crane, the Tadano GR-1000XL-4 among them.

Requests, last 12 months
72
For Dubai
33
For Abu Dhabi
21
  • Crawler Cranes Required For RentDubai / 20 November 2026
  • Hiab Crane/Truck Crane 10 Ton or Above Required For RentDubai / 19 November 2026
  • 160 TON Crane Required For PurchaseAbu Dhabi / 18 November 2026

Open mobile crane requests on the Inquiry BoardPost a request for a Tadano GR-1000XL-4

Tools for a Tadano GR-1000XL-4

For the people who run one: codes, charts and calculators that fit a mobile crane.

Ranked: Mobile cranes by lifting capacity

By maximum lifting capacity, largest first. The Tadano GR-1000XL-4 is 16 of 25; every figure is the maker's.

  1. 12SANY STC1600T7160 t
  2. 13Liebherr LTM 1100-4.2100 t
  3. 14SANY STC1000T6100 t
  4. 15XCMG QY100K5C100 t
  5. 16Tadano GR-1000XL-4This page90.7 t
  6. 17Liebherr LTM 1090-4.290 t
  7. 18SANY STC800C580 t
  8. 19XCMG XCT8080 t
  9. 20Zoomlion ZTC800V53280 t

Showing 12 to 20 of 25, the machines nearest the Tadano GR-1000XL-4 by maximum lifting capacity.

Popular Tadano mobile crane models

Tadano GR-1000XL-4 fault codes and serial number

More Tadano GR-1000XL-4 questions

How much does a Tadano GR-1000XL-4 weigh?

53.2 tonnes: 53,170 kg (117,220 lb).

How long is the Tadano GR-1000XL-4's boom?

The main boom extends to 47 m (154.2 ft).

How high can a Tadano GR-1000XL-4 lift?

Its maximum tip height is 47.1 m (154.5 ft).

How much horsepower does the Tadano GR-1000XL-4 have?

280 hp (209 kW) gross, At 2,200 rpm.

How heavy is the counterweight on a Tadano GR-1000XL-4?

9,100 kg (20,100 lb).

How many axles does a Tadano GR-1000XL-4 have?

2; front and rear full-floating steering and driving axles with planetary reduction (4x4x4).

What is the outrigger spread of a Tadano GR-1000XL-4?

7.3 m (23 ft 11 in) across.

How long is the jib on a Tadano GR-1000XL-4?

2-stage bi-fold lattice, 10.1 m / 17.7 m, 3.5 / 25 / 45 deg offset, assist cylinders for mounting.

How tall is a Tadano GR-1000XL-4?

3.81 m (12 ft 6 in) overall.

What are the Tadano GR-1000XL-4's main competitors?

The machines nearest it in size are the XCMG QY100K5C, the Liebherr LTM 1500-8.1 and the Liebherr LTM 1100-4.2. Each has a side-by-side comparison on EquipmentsFinder.

Is the Tadano GR-1000XL-4 sold in the UAE?

Yes. The Tadano GR-1000XL-4 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Tadano GR-1000XL-4 used for?

A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far. Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.

Embed this spec card

The Tadano GR-1000XL-4's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/tadano-gr1000xl" title="Tadano GR-1000XL-4 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/tadano-gr1000xl">Tadano GR-1000XL-4 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Tadano GR-1000XL-4 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.