EF Logo

mobile cranemade by GroveUAE, USA, Global

Grove RT540ESpecs and dimensions

Max lifting capacity
35 t
38.6 US tons
Main boom, extended
31 m
101 ft 8 in
Est. new price
~$410k

Quick answer

The Grove RT540E is a mobile crane with a Cummins QSB 6.7 L engine. It lifts up to 35 t, reaches a tip height of 33.6 m and drives at up to 40 km/h. It suits lifting steel, precast and plant on building sites and erecting tower cranes and site cabins. People compare it with the Tadano GR-1000XL-4 (90.7 t) and the Tadano GR-500EXL (51 t).

Grove RT540E (illustration)

What engine is in the Grove RT540E?

The Grove RT540E is offered with Cummins QSB 6.7 L, 6-cyl diesel, turbocharged (Tier 3; Tier 4 final / EU Stage IIIB with diesel oxidation catalyst). It displaces 6.7 L (1.8 gal) and makes 731 Nm (539 lbf-ft) of torque. The fuel tank holds 219 L (58 gal). The figures are from Grove RT540E product guide, metric (Manitowoc, 2018 edition, Cranepedia copy).

Cummins fault codes

How much can a Grove RT540E lift?

The Grove RT540E lifts up to 35 t, reaches a tip height of 33.6 m and drives at up to 40 km/h. In imperial units the lifting capacity is 38.6 US tons. The sheet notes: at 2.5 m radius on full outriggers, 360 deg, 9.8 m boom, EN 13000 / 85 %.

What are the Grove RT540E dimensions?

The Grove RT540E is 11.94 m (39 ft 2 in) long, 2.61 m (8 ft 7 in) wide and 3.23 m (10 ft 7 in) high. As it stands it is too big for the door of a standard shipping container. The Tadano GR-1000XL-4 is 14.38 m long, 3.31 m wide and 3.81 m high.

Grove RT540E vs Tadano GR-1000XL-4: what is the difference?

The Grove RT540E and the Tadano GR-1000XL-4 are both mobile cranes; this is where their sheets differ. The Grove RT540E is faster (40 km/h against 36 km/h), is narrower to transport (2.606 m against 3.315 m) and is lower to transport (3.235 m against 3.805 m). The Tadano GR-1000XL-4 has more torque (1,152 Nm against 731 Nm) and carries more fuel (300 L against 219 L).

Grove RT540E dimensions

Grove RT540E, side view with dimensions (illustration)3.24 m3.66 m11.9 m
Side view
Grove RT540E, front view (illustration)2.61 m
Front view
Overall height
3.24 m
Wheelbase
3.66 m
Overall length
11.9 m
Overall width
2.61 m

Illustration; figures from the maker's sheet.

How big is the Grove RT540E?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Grove RT540E drawn to scale beside a person, a pickup truck and a 40 ft container. The Grove RT540E is 11.94 m long - about the length of a forty-foot container - and 3.24 m tall, 1.8 times a person's height.Grove RT540E11.94 × 3.24 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Grove RT540E is 11.94 m long - about the length of a forty-foot container - and 3.24 m tall, 1.8 times a person's height.

Grove RT540E load chart

What it lifts as the radius grows, from the maker’s chart. Not for lift planning.

  1. 35 t2.5 m9.8 m boom
  2. 19.9 t5 m12.2 m boom
  3. 5.6 t6 m12.2 m boom
  4. 8.5 t10 m18.3 m boom
  5. 8.8 t10 m18.3 m boom
  6. 5 t10 m21.3 m boom

Every radius and boom length, 4 configurations, with a reader.

Full load chart

Grove RT540E specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 18 November 2026.

67 figures in 5 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length11.943 mStowed, boom retracted, front of boom nose to rear of counterweight (S/S overall)[1] p.5
Overall width2.606 m20.5 x 25 tyres; 2.536 m with 16.0 x 25 tyres[1] p.5
Overall height3.235 mGround to top of superstructure; 3.283 m with the boom horizontal[1] p.5
Wheelbase3.66 m[1] p.5
Chassis length7.117 mFront to rear of carrier frame[1] p.5
Boom overhang4.745 mFront of boom nose to front of carrier[1] p.5
Decking height1.578 mCarrier deck above ground[1] p.5
Track width2.055 m20.5 x 25 tyres; 2.093 m with 16.0 x 25 tyres[1] p.5
Approach angle25°20.5 x 25 tyres; 26.0 deg with 16.0 x 25 tyres[1] p.5
Departure angle23°20.5 x 25 tyres; 23.5 deg with 16.0 x 25 tyres[1] p.5
Outside curb clearance radius10.236 mTwo-wheel steer, 20.5 x 25 tyres; 10.185 m with 16.0 x 25. Four-wheel steer: 6.061 m (6.010 m)[1] p.5
Outside turning radius10.007 mTwo-wheel steer, 20.5 x 25 tyres; 9.981 m with 16.0 x 25. Four-wheel steer: 5.832 m (5.806 m)[1] p.5
Inside turning radius8.138 mTwo-wheel steer; four-wheel steer 4.000 m[1] p.5
Dimensions, part 2 of 2
FigureValue (metric)Source
Inside curb radius7.021 mTwo-wheel steer; four-wheel steer 3.498 m[1] p.5
Turning radius A13.563 mOuter arc A on the maker plan view, two-wheel steer; four-wheel steer 9.797 m[1] p.5
Turning radius B13.328 mArc B on the maker plan view, two-wheel steer; four-wheel steer 9.490 m[1] p.5
Turning radius C10.899 mArc C on the maker plan view, two-wheel steer; four-wheel steer 6.732 m[1] p.5
Tail slewing radius3.8 m[1] p.5
Boom nose offset0.248 mBoom nose beyond the start of the retracted boom length; boom 9.834 m retracted and 31.002 m extended[1] p.5
Centre of rotation to rear axle1.905 mBoom pivot sits above the rear axle line[1] p.5
Outrigger span, longitudinal6.147 mFront to rear outrigger boxes; 2.947 m ahead of and 3.200 m behind the centre of rotation[1] p.5
Outrigger span, transverse (max)6.095 mFully extended; 4.267 m mid-extend, 2.387 m retracted[1] p.5
Outrigger jack stroke0.616 m[1] p.5
Outrigger beam ground clearance0.499 m[1] p.5
Outrigger float size0.362 mSquare, quick-release type[1] p.15

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Gross vehicle weight27,693 kgBasic machine with 31.0 m main boom, main hoist with 137 m rope, 4,300 kg counterweight, 6.8 t headache ball and 35 t hook block; 13,239 kg front axle + 14,454 kg rear axle[1] p.6
Gross vehicle weight, with auxiliary hoist27,915 kgAdds auxiliary hoist, 137 m of 35x7 rope and auxiliary boom nose in place of the headache ball; front axle 13,320 kg[1] p.6
Gross vehicle weight, with swingaway28,775 kgAdds the 7.9-13.7 m telescopic swingaway and hangers; 14,747 kg front axle + 14,028 kg rear axle[1] p.6
Counterweight4,305 kgPinned to the superstructure; the weight table gives 4,300 kg[1] p.15
Weight, part 2 of 2
FigureValue (metric)Source
Max outrigger pad load26,300 kg[1] p.15
Hook block, 35 t360 kg3 sheaves, 2-7 parts of line[1] p.6
Headache ball, 7 t (swivel)165 kg1 part of line[1] p.6

Crane

Crane, part 1 of 2
FigureValue (metric)Source
Max lifting capacity35 tAt 2.5 m radius on full outriggers, 360 deg, 9.8 m boom, EN 13000 / 85 %[1] p.8
Main boom length (m, fully extended)31 m[1] p.15
Main boom length retracted (m)9.8 m[1] p.15
Boom sections4, synchronized full power boom[1] p.15
Max tip height33.6 mMain boom tip height[1] p.15
Max tip height with swingaway47 mWith the 7.9-13.7 m telescopic swingaway[1] p.15
Max radius, main boom chart28 m0.65 t at 28 m radius with the 31.0 m boom[1] p.8
Swingaway7.9 m - 13.7 m telescopic, offsets at 0, 15 and 30 deg; stows alongside the base boom sectionOptional[1] p.15
Boom elevation angle-3 to +78 degThe data table on p.6 prints -20 / +70 deg and the 2013 imperial guide -3 to +76 deg[1] p.15
Boom elevation timeApprox. 20 s[1] p.6
Crane, part 2 of 2
FigureValue (metric)Source
Boom extension timeApprox. 72 s from 9.8 m to 31.0 m[1] p.6
Hoist single-line speed0-136 m/min, main and auxiliary hoist[1] p.6
Hoist line pull5,280 kgfMax single line pull and permissible line pull, first layer; 4,323 kg on the 3rd layer, 3,656 kg on the 5th[1] p.15
Hoist rope16 mm, 34w x K7 rotation-resistant (34x37 class), 137 m on each hoist; max rope stowage 181 m[1] p.15
Slewing speed0-2.0 rpm, 360 deg; planetary swing drive, single position mechanical house lock[1] p.15
Hydraulic pumps2 main pumps (1 piston, 1 gear), combined 316.5 L/min; three-section pressure-compensated valve bank[1] p.15
Max hydraulic pressure276 bar[1] p.15
Hydraulic tank capacity396 L[1] p.15
Load moment systemCrane Control System (CCS) graphic display with anti-two block and work area definition[1] p.15

Chassis

Chassis, part 1 of 2
FigureValue (metric)Source
Drive / steer4x4x4; fully independent power steering with four modes (front only, rear only, crab, coordinated)[1] p.15
Turning radius7.62 mFigure quoted on the maker specification page[1] p.15
AxlesFront: drive/steer with differential and planetary reduction hubs, rigid mounted. Rear: same, pivot mounted[1] p.15
Tyres20.5 x 25 - 24 ply bias standard; 16.0 x 25 - 28 ply bias optional[1] p.15
TransmissionRange-shift 6 speed (3 speeds x 2 ranges, forward and reverse); front axle disconnect for 4x2 travel[1] p.15
Chassis, part 2 of 2
FigureValue (metric)Source
Top speed40 km/hAt 2,500 rpm[1] p.15
Gradeability (max)119 % theoreticalBased on 28,365 kg GVW, 20.5 x 25 tyres, 31 m boom, 13.7 m swingaway, 4,305 kg counterweight[1] p.15
BrakesFull hydraulic split circuit on all wheels; spring-applied, hydraulically released parking brake on the front axle[1] p.15
Outriggers4 hydraulic telescoping single-stage double box beams with inverted jacks; 3 positions (0 %, 50 %, fully extended)[1] p.15
Electrical systemMaintenance-free 12 V batteries with battery disconnect; CAN-bus diagnosticsThe 2018 sheet prints four batteries and 24 V starting; the 2015 sheet two batteries and 12 V[1] p.15

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelCummins QSB 6.7 L, 6-cyl diesel, turbocharged (Tier 3; Tier 4 final / EU Stage IIIB with diesel oxidation catalyst)Tier 4 engine required in North America and the EU[1] p.15
Displacement6.7 L[1] p.15
Engine power, Tier 3119 kW (160 hp)At 2,500 rpm[1] p.15
Engine, part 2 of 2
FigureValue (metric)Source
Engine power, Tier 4122 kW (164 hp)At 2,300 rpm[1] p.15
Max torque731 NmAt 1,500 rpm (both engines)[1] p.15
Fuel tank219 LTier 3 engine[1] p.15

Build: Grove RT540E, 35 t four-section rough terrain crane (9.8-31.0 m boom, 7.9-13.7 m telescopic swingaway, Cummins QSB 6.7 engine, 4x4x4, 20.5 x 25 tyres as standard, 4,305 kg counterweight) per the Manitowoc/Grove metric product guide (EN 13000, 2018 edition, Cranepedia copy); dimensions are for 20.5 x 25 tyres in two-wheel steer unless noted. Dimensions numbered 1-6 are ours; the maker's own letters (A-K, M) are kept where it prints them.

  1. [1]Grove RT540E product guide, metric (Manitowoc, 2018 edition, Cranepedia copy)
  2. [2]Grove RT540E product guide (Manitowoc, 2015 edition, CLT Cranes copy)

Grove RT540E against its rivals

The mobile cranes nearest in weight from other makers, figure by figure, each shown at the same scale.

Grove RT540E, Tadano GR-1000XL-4, Tadano GR-500EXL, Tadano GR-250N: specifications side by side
FigureGrove RT540Ethis pageTadano GR-1000XL-4 specsTadano GR-500EXL specsTadano GR-250N specs
Gross powernot on its sheet209 kW (280 hp)200 kW (267 hp)201 kW (273 PS)
Max torque731 Nm1,152 Nm785 Nm990 Nm
Fuel tank219 L300 L300 L300 L
Top speed40 km/h36 km/h48 km/h49 km/h
Turning radius, 4-wheel steernot on its sheet6.8 m6 m5.1 m
Overall width2.606 m3.315 m2.96 m2.62 m
Overall height3.235 m3.805 m3.865 m3.475 m
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Grove RT540E if you need a narrower machine to move (2.606 m) and a lower machine to move (3.235 m).
  • Pick the Tadano GR-1000XL-4 if you need more gross power (209 kW) and more torque (1,152 Nm).
  • Pick the Tadano GR-250N if you need more speed (49 km/h) and a tighter turn (5.1 m).

Grove RT540E prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Grove RT540E costs about $390,000 to $425,000 (USD), base machine before options, freight and tax - an estimate from published estimates, checked November 2026. Sources: cranetrader.com, equipbook.ai.

No Grove RT540E is listed in the UAE on EquipmentsFinder right now. The prices below are for all mobile cranes, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 30

AED 2,225 /day

No priced Grove RT540E for hire yet: this is all mobile cranes

Low AED 1,000High AED 8,000

No Grove RT540E for rent listed right now.

Request a Grove RT540E

Who is asking for mobile cranes in the UAE

Contractors posted 72 requests for mobile cranes on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (33), Abu Dhabi (21) and Sharjah (7). Requests name a kind of machine, not a model, so this counts every mobile crane, the Grove RT540E among them.

Requests, last 12 months
72
For Dubai
33
For Abu Dhabi
21
  • Crawler Cranes Required For RentDubai / 20 November 2026
  • Hiab Crane/Truck Crane 10 Ton or Above Required For RentDubai / 19 November 2026
  • 160 TON Crane Required For PurchaseAbu Dhabi / 18 November 2026

Open mobile crane requests on the Inquiry BoardPost a request for a Grove RT540E

Tools for a Grove RT540E

For the people who run one: codes, charts and calculators that fit a mobile crane.

Popular Grove mobile crane models

Grove RT540E fault codes and serial number

More Grove RT540E questions

How much does a Grove RT540E weigh?

27.7 tonnes: 27,693 kg (61,053 lb).

How long is the Grove RT540E's boom?

The main boom extends to 31 m (101 ft 8 in).

How high can a Grove RT540E lift?

Its maximum tip height is 33.6 m (110 ft 3 in), main boom tip height.

How heavy is the counterweight on a Grove RT540E?

4,305 kg (9,491 lb).

What is the outrigger spread of a Grove RT540E?

6.095 m (20 ft 0 in) across.

How tall is a Grove RT540E?

3.23 m (10 ft 7 in) overall.

What is the tail swing radius of a Grove RT540E?

3.8 m (12 ft 6 in).

How wide is a Grove RT540E?

2.61 m (8 ft 7 in) overall.

How long is a Grove RT540E?

11.94 m (39 ft 2 in) overall.

What are the Grove RT540E's main competitors?

The machines nearest it in size are the XCMG QY100K5C, the Liebherr LTM 1500-8.1 and the Liebherr LTM 1100-4.2. Each has a side-by-side comparison on EquipmentsFinder.

Is the Grove RT540E sold in the UAE?

Yes. The Grove RT540E is sold in the UAE, the USA and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Grove RT540E used for?

A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far. Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.

Embed this spec card

The Grove RT540E's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/grove-rt540e" title="Grove RT540E specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/grove-rt540e">Grove RT540E specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Grove RT540E on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.