Specification sheetIssued 20 November 2026
Grove · mobile crane
Grove RT540E
Grove RT540E, 35 t four-section rough terrain crane (9.8-31.0 m boom, 7.9-13.7 m telescopic swingaway, Cummins QSB 6.7 engine, 4x4x4, 20.5 x 25 tyres as standard, 4,305 kg counterweight) per the Manitowoc/Grove metric product guide (EN 13000, 2018 edition, Cranepedia copy); dimensions are for 20.5 x 25 tyres in two-wheel steer unless noted. Dimensions numbered 1-6 are ours; the maker's own letters (A-K, M) are kept where it prints them.
UAEUSAGlobal
- lifting capacity
- 35 t
- Main boom length (m, fully extended)
- 31 m
- tip height
- 33.6 m
3.24 m3.66 m11.9 m
2.61 mDimensions
- Tail slewing radius
- 3.8 m
- Boom nose offset (Boom nose beyond the start of the retracted boom length; boom 9.834 m retracted and 31.002 m extended)
- 0.248 m
- Centre of rotation to rear axle (Boom pivot sits above the rear axle line)
- 1.905 m
- Outrigger span, longitudinal (Front to rear outrigger boxes; 2.947 m ahead of and 3.200 m behind the centre of rotation)
- 6.147 m
- Outrigger span, transverse (max) (Fully extended; 4.267 m mid-extend, 2.387 m retracted)
- 6.095 m
- Outrigger jack stroke
- 0.616 m
- Outrigger beam ground clearance
- 0.499 m
- Outrigger float size (Square, quick-release type)
- 0.362 m
Weight
- Gross vehicle weight (Basic machine with 31.0 m main boom, main hoist with 137 m rope, 4,300 kg counterweight, 6.8 t headache ball and 35 t hook block; 13,239 kg front axle + 14,454 kg rear axle)
- 27,693 kg
- Gross vehicle weight, with auxiliary hoist (Adds auxiliary hoist, 137 m of 35x7 rope and auxiliary boom nose in place of the headache ball; front axle 13,320 kg)
- 27,915 kg
- Gross vehicle weight, with swingaway (Adds the 7.9-13.7 m telescopic swingaway and hangers; 14,747 kg front axle + 14,028 kg rear axle)
- 28,775 kg
- Counterweight (Pinned to the superstructure; the weight table gives 4,300 kg)
- 4,305 kg
- Max outrigger pad load
- 26,300 kg
- Hook block, 35 t (3 sheaves, 2-7 parts of line)
- 360 kg
- Headache ball, 7 t (swivel) (1 part of line)
- 165 kg
Crane
- Max lifting capacity (At 2.5 m radius on full outriggers, 360 deg, 9.8 m boom, EN 13000 / 85 %)
- 35 t
- Main boom length (m, fully extended)
- 31 m
- Main boom length retracted (m)
- 9.8 m
- Boom sections
- 4, synchronized full power boom
- Max tip height (Main boom tip height)
- 33.6 m
- Max tip height with swingaway (With the 7.9-13.7 m telescopic swingaway)
- 47 m
- Max radius, main boom chart (0.65 t at 28 m radius with the 31.0 m boom)
- 28 m
- Swingaway (Optional)
- 7.9 m - 13.7 m telescopic, offsets at 0, 15 and 30 deg; stows alongside the base boom section
- Boom elevation angle (The data table on p.6 prints -20 / +70 deg and the 2013 imperial guide -3 to +76 deg)
- -3 to +78 deg
- Boom elevation time
- Approx. 20 s
- Boom extension time
- Approx. 72 s from 9.8 m to 31.0 m
- Hoist single-line speed
- 0-136 m/min, main and auxiliary hoist
- Hoist line pull (Max single line pull and permissible line pull, first layer; 4,323 kg on the 3rd layer, 3,656 kg on the 5th)
- 5,280 kgf
- Hoist rope
- 16 mm, 34w x K7 rotation-resistant (34x37 class), 137 m on each hoist; max rope stowage 181 m
- Slewing speed
- 0-2.0 rpm, 360 deg; planetary swing drive, single position mechanical house lock
- Hydraulic pumps
- 2 main pumps (1 piston, 1 gear), combined 316.5 L/min; three-section pressure-compensated valve bank
- Max hydraulic pressure
- 276 bar
- Hydraulic tank capacity
- 396 L
- Load moment system
- Crane Control System (CCS) graphic display with anti-two block and work area definition
Chassis
- Drive / steer
- 4x4x4; fully independent power steering with four modes (front only, rear only, crab, coordinated)
- Turning radius (Figure quoted on the maker specification page)
- 7.62 m
- Axles
- Front: drive/steer with differential and planetary reduction hubs, rigid mounted. Rear: same, pivot mounted
- Tyres
- 20.5 x 25 - 24 ply bias standard; 16.0 x 25 - 28 ply bias optional
- Transmission
- Range-shift 6 speed (3 speeds x 2 ranges, forward and reverse); front axle disconnect for 4x2 travel
- Top speed (At 2,500 rpm)
- 40 km/h
- Gradeability (max) (Based on 28,365 kg GVW, 20.5 x 25 tyres, 31 m boom, 13.7 m swingaway, 4,305 kg counterweight)
- 119 % theoretical
- Brakes
- Full hydraulic split circuit on all wheels; spring-applied, hydraulically released parking brake on the front axle
- Outriggers
- 4 hydraulic telescoping single-stage double box beams with inverted jacks; 3 positions (0 %, 50 %, fully extended)
- Electrical system (The 2018 sheet prints four batteries and 24 V starting; the 2015 sheet two batteries and 12 V)
- Maintenance-free 12 V batteries with battery disconnect; CAN-bus diagnostics
Engine
- Engine model (Tier 4 engine required in North America and the EU)
- Cummins QSB 6.7 L, 6-cyl diesel, turbocharged (Tier 3; Tier 4 final / EU Stage IIIB with diesel oxidation catalyst)
- Displacement
- 6.7 L
- Engine power, Tier 3 (At 2,500 rpm)
- 119 kW (160 hp)
- Engine power, Tier 4 (At 2,300 rpm)
- 122 kW (164 hp)
- Max torque (At 1,500 rpm (both engines))
- 731 Nm
- Fuel tank (Tier 3 engine)
- 219 L