Grove RT540E
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Grove · mobile crane

Grove RT540E

Grove RT540E, 35 t four-section rough terrain crane (9.8-31.0 m boom, 7.9-13.7 m telescopic swingaway, Cummins QSB 6.7 engine, 4x4x4, 20.5 x 25 tyres as standard, 4,305 kg counterweight) per the Manitowoc/Grove metric product guide (EN 13000, 2018 edition, Cranepedia copy); dimensions are for 20.5 x 25 tyres in two-wheel steer unless noted. Dimensions numbered 1-6 are ours; the maker's own letters (A-K, M) are kept where it prints them.

UAEUSAGlobal

lifting capacity
38.6 US tons
Main boom length (m, fully extended)
101 ft 8 in
tip height
110 ft 3 in
Grove RT540E, side view with dimensions (illustration)10.6 ft12 ft39.2 ft
Grove RT540E, front view (illustration)8.5 ft

Dimensions

Tail slewing radius
12 ft 6 in
Boom nose offset (Boom nose beyond the start of the retracted boom length; boom 9.834 m retracted and 31.002 m extended)
0 ft 10 in
Centre of rotation to rear axle (Boom pivot sits above the rear axle line)
6 ft 3 in
Outrigger span, longitudinal (Front to rear outrigger boxes; 2.947 m ahead of and 3.200 m behind the centre of rotation)
20 ft 2 in
Outrigger span, transverse (max) (Fully extended; 4.267 m mid-extend, 2.387 m retracted)
20 ft 0 in
Outrigger jack stroke
2 ft 0 in
Outrigger beam ground clearance
1 ft 8 in
Outrigger float size (Square, quick-release type)
1 ft 2 in

Weight

Gross vehicle weight (Basic machine with 31.0 m main boom, main hoist with 137 m rope, 4,300 kg counterweight, 6.8 t headache ball and 35 t hook block; 13,239 kg front axle + 14,454 kg rear axle)
61,053 lb
Gross vehicle weight, with auxiliary hoist (Adds auxiliary hoist, 137 m of 35x7 rope and auxiliary boom nose in place of the headache ball; front axle 13,320 kg)
61,542 lb
Gross vehicle weight, with swingaway (Adds the 7.9-13.7 m telescopic swingaway and hangers; 14,747 kg front axle + 14,028 kg rear axle)
63,438 lb
Counterweight (Pinned to the superstructure; the weight table gives 4,300 kg)
9,491 lb
Max outrigger pad load
57,982 lb
Hook block, 35 t (3 sheaves, 2-7 parts of line)
794 lb
Headache ball, 7 t (swivel) (1 part of line)
364 lb

Crane

Max lifting capacity (At 2.5 m radius on full outriggers, 360 deg, 9.8 m boom, EN 13000 / 85 %)
38.6 US tons
Main boom length (m, fully extended)
101 ft 8 in
Main boom length retracted (m)
32 ft 2 in
Boom sections
4, synchronized full power boom
Max tip height (Main boom tip height)
110 ft 3 in
Max tip height with swingaway (With the 7.9-13.7 m telescopic swingaway)
154 ft 2 in
Max radius, main boom chart (0.65 t at 28 m radius with the 31.0 m boom)
91 ft 10 in
Swingaway (Optional)
7.9 m - 13.7 m telescopic, offsets at 0, 15 and 30 deg; stows alongside the base boom section
Boom elevation angle (The data table on p.6 prints -20 / +70 deg and the 2013 imperial guide -3 to +76 deg)
-3 to +78 deg
Boom elevation time
Approx. 20 s
Boom extension time
Approx. 72 s from 9.8 m to 31.0 m
Hoist single-line speed
0-136 m/min, main and auxiliary hoist
Hoist line pull (Max single line pull and permissible line pull, first layer; 4,323 kg on the 3rd layer, 3,656 kg on the 5th)
11,640 lbf
Hoist rope
16 mm, 34w x K7 rotation-resistant (34x37 class), 137 m on each hoist; max rope stowage 181 m
Slewing speed
0-2.0 rpm, 360 deg; planetary swing drive, single position mechanical house lock
Hydraulic pumps
2 main pumps (1 piston, 1 gear), combined 316.5 L/min; three-section pressure-compensated valve bank
Max hydraulic pressure
3,999 psi
Hydraulic tank capacity
105 gal
Load moment system
Crane Control System (CCS) graphic display with anti-two block and work area definition

Chassis

Drive / steer
4x4x4; fully independent power steering with four modes (front only, rear only, crab, coordinated)
Turning radius (Figure quoted on the maker specification page)
25 ft 0 in
Axles
Front: drive/steer with differential and planetary reduction hubs, rigid mounted. Rear: same, pivot mounted
Tyres
20.5 x 25 - 24 ply bias standard; 16.0 x 25 - 28 ply bias optional
Transmission
Range-shift 6 speed (3 speeds x 2 ranges, forward and reverse); front axle disconnect for 4x2 travel
Top speed (At 2,500 rpm)
24.9 mph
Gradeability (max) (Based on 28,365 kg GVW, 20.5 x 25 tyres, 31 m boom, 13.7 m swingaway, 4,305 kg counterweight)
119 % theoretical
Brakes
Full hydraulic split circuit on all wheels; spring-applied, hydraulically released parking brake on the front axle
Outriggers
4 hydraulic telescoping single-stage double box beams with inverted jacks; 3 positions (0 %, 50 %, fully extended)
Electrical system (The 2018 sheet prints four batteries and 24 V starting; the 2015 sheet two batteries and 12 V)
Maintenance-free 12 V batteries with battery disconnect; CAN-bus diagnostics

Engine

Engine model (Tier 4 engine required in North America and the EU)
Cummins QSB 6.7 L, 6-cyl diesel, turbocharged (Tier 3; Tier 4 final / EU Stage IIIB with diesel oxidation catalyst)
Displacement
1.8 gal
Engine power, Tier 3 (At 2,500 rpm)
160 hp
Engine power, Tier 4 (At 2,300 rpm)
164 hp
Max torque (At 1,500 rpm (both engines))
539 lbf-ft
Fuel tank (Tier 3 engine)
58 gal