The formula
Tension per leg = load ÷ (legs carrying × sin(angle from horizontal)).
What it works out
Find the tension in each sling leg at a given angle, and the WLL each leg needs.
Why it matters
The flatter the sling, the more it pulls; below 45 degrees from horizontal it climbs quickly.
How to use it
- Enter the Load Weight in tonnes, including any spreader beam.
- Choose the Number of Legs and How the Legs Share. For a rigid load on a 3 or 4-leg sling, assume two legs take it unless an equaliser is used.
- Choose whether the Sling Angle is measured from horizontal (the load) or from vertical (the hook line), and enter it in degrees.
- Read Tension per Leg, the Load Angle Factor and the Minimum WLL per Leg, with the allowance for uneven sharing and shock you set.
Quick reference
Printable chartTwo-leg sling on a 10 t load by angle from horizontal
| Angle from horizontal (°) | Angle factor | Tension per leg (t) | Min. WLL per leg (t) |
|---|---|---|---|
| 30 | 2 | 10 t | 11 t |
| 45 | 1.41 | 7.07 t | 7.78 t |
| 60 | 1.16 | 5.77 t | 6.35 t |
| 75 | 1.04 | 5.18 t | 5.69 t |
| 90 | 1 | 5 t | 5.5 t |
Two legs carrying a 10 t load, with a 10% allowance for sharing and shock.
The formula
Tension per leg = load ÷ (legs carrying × sin θ), where θ is the angle between the sling and the horizontal. The load angle factor is 1 ÷ sin θ. The angle from vertical is 90° minus the angle from horizontal. A vertical sling (θ = 90°) has a factor of 1; at 60° it is about 1.15, at 45° about 1.41 and at 30° it is 2.
Why a small angle is dangerous
As a sling flattens, each leg has to pull outward as well as upward, so its tension climbs steeply while the load stays the same. Below 45° from horizontal the factor rises quickly and the sling’s WLL, which is rated at a stated angle, can be exceeded without any sign. Keep the angle at 60° or more where you can, never go below 45° unless the lift plan allows it, and use a spreader beam to make the legs steeper.
Three and four-leg slings
On a rigid load, the legs do not share evenly: the load can sit on two legs while the others hang slack. The usual conservative rule is to size a 3 or 4-leg sling as if two legs carry everything. Only use equal sharing where an equaliser or a properly rigged spreader makes it so. Check the WLL on the sling’s tag, at the angle used, against the minimum shown. Round up, never down.
Worked examples
- A 10 t load on a two-leg sling at 60° from horizontal gives a factor of 1.16: 5.77 t (56.62 kN) in each leg, so choose legs with a WLL of at least 6.35 t.
- The same 10 t load at 30° from horizontal has a factor of 2 and 10 t in each leg, so each leg needs a WLL of at least 11 t.
- A 16 t load on a 4-leg sling at 30° from vertical (60 ° from horizontal), with only 2 legs counted as carrying, gives 9.24 t per leg.
Frequently asked questions
How do I calculate sling tension at an angle?
Divide the load by the number of legs carrying it and by the sine of the angle from horizontal. The calculator does it and shows the factor.
What is the load angle factor?
It is 1 divided by the sine of the angle from horizontal: the number you multiply the share of the load by to get the tension in the leg.
What is the minimum safe sling angle?
Generally 45° from horizontal, and 60° is better. Below 45° the tension rises very fast and the sling needs the lift plan’s approval.
How do I find the angle from vertical?
Take 90° minus the angle from horizontal. A 60° angle from horizontal is 30° from vertical.
Why do 4-leg slings count as two legs?
A rigid load rests on two legs and the other two cannot be relied on to carry any, so the calculation uses the legs that must hold it.
Add this calculator to your website
Copy the code and paste it into your page. The calculator is free and works as it does here.
<iframe src="https://www.equipmentsfinder.com/embed/field-tools/sling-angle-calculator" title="Sling angle calculator: tension per leg and minimum WLL" width="100%" height="620" style="border:0;max-width:720px" loading="lazy"></iframe> <p style="font-size:12px"><a href="https://www.equipmentsfinder.com/field-tools/sling-angle-calculator">Sling angle calculator: tension per leg and minimum WLL</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>
