The formula
Capacity = rated × rated center ÷ actual center × (1 − attachment %).
What it works out
The safe lifting capacity when the load center moves out.
Why it matters
Check a load before it tips the forklift.
How to use it
- Enter the Rated Capacity in kg and the Rated Load Center in mm from the forklift’s data plate. A common rating is 3,000 kg at 500 mm.
- Enter the Actual Load Center in mm: the distance from the face of the forks to the centre of gravity of your load.
- Enter the Attachment Deduction (%) if a side shifter, fork positioner or other attachment is fitted. Use the figure on the attachment plate, or 0 for none.
- Enter Your Load in kg.
- Read Safe Capacity, Capacity Reduction and Spare Capacity. A negative spare capacity means the load is over the safe capacity.
Quick reference
Printable chartForklift capacity by load center (3,000 kg at 500 mm, 2,000 kg load)
| Load center (mm) | Safe capacity (kg) | Reduction (%) | Spare with 2,000 kg (kg) |
|---|---|---|---|
| 500 | 3,000 kg | 0 % | 1,000 kg |
| 600 | 2,500 kg | 16.67 % | 500 kg |
| 700 | 2,143 kg | 28.57 % | 142.9 kg |
| 800 | 1,875 kg | 37.5 % | -125 kg |
| 900 | 1,667 kg | 44.44 % | -333.3 kg |
| 1,000 | 1,500 kg | 50 % | -500 kg |
| 1,200 | 1,250 kg | 58.33 % | -750 kg |
A 3,000 kg forklift rated at 500 mm, no attachment, carrying 2,000 kg. Only the actual load center changes down the table.
The formula
Safe capacity = rated capacity × rated load center ÷ actual load center × (1 − attachment deduction ÷ 100). Capacity reduction is the percentage drop from the rated figure. Spare capacity = safe capacity − your load.
What changes the result
The load center is the distance from the fork face to the centre of gravity of the load. A forklift rated at 3,000 kg at 500 mm cannot lift the same weight when the load sits further out, because the further the weight is from the front axle, the more it tries to tip the truck forward. A long pallet, a drum on its side or an oversize crate often has a longer load center than the rating. Attachments reduce capacity because they add weight and move the load forward; the plate on the attachment gives the deduction. Lift height and mast tilt can reduce capacity further, and the truck’s own capacity chart covers that.
Forklift practice on UAE sites
Always use the manufacturer’s data plate and capacity chart rather than the brochure, since the plate is specific to that truck and its attachments. Check the load weight on the delivery note rather than guessing. On sites with uneven or sandy ground there is less room for error, so rough-terrain forklifts and telehandlers are usually hired for the actual load and its load center, not the headline rating. Operators should hold a valid licence and be trained on the specific truck.
Worked examples
- A 3,000 kg forklift rated at 500 mm, lifting a load with its centre at 600 mm, can safely lift 2,500 kg, a 16.67 % drop. A 2,000 kg load leaves 500 kg spare.
- The same truck with a long load, centre at 900 mm, is down to 1,667 kg, and a 2,000 kg load leaves -333.3 kg. A negative figure means it is overloaded.
- A 5,000 kg forklift with an attachment that takes 15% off the capacity is down to 4,250 kg. Carrying 3,500 kg leaves 750 kg.
Frequently asked questions
What is a forklift capacity calculator?
It works out the safe lifting capacity of a forklift when the load center is different from the rated one. Enter the data plate figures and your load, and compare the safe capacity with the weight.
What is the load center on a forklift?
The horizontal distance from the face of the forks to the centre of gravity of the load. The standard rating is often at 500 mm, shown on the data plate.
How do I calculate forklift capacity at a longer load center?
Multiply the rated capacity by the rated load center and divide by the actual load center. A longer center gives a proportionally smaller capacity.
Do forklift attachments reduce capacity?
Yes. A side shifter, a rotator or a fork positioner reduces the capacity. Use the deduction on the attachment’s plate, or the revised capacity on the truck’s data plate.
What does a negative spare capacity mean?
It means your load is heavier than the safe capacity at that load center, so the forklift is overloaded. Do not lift: use a larger forklift, a telehandler or a crane.
Add this calculator to your website
Copy the code and paste it into your page. The calculator is free and works as it does here.
<iframe src="https://www.equipmentsfinder.com/embed/field-tools/forklift-capacity-calculator" title="Forklift capacity calculator (load center)" width="100%" height="620" style="border:0;max-width:720px" loading="lazy"></iframe> <p style="font-size:12px"><a href="https://www.equipmentsfinder.com/field-tools/forklift-capacity-calculator">Forklift capacity calculator (load center)</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>
