EF Logo

mobile cranemade by TadanoUAE, Global

Tadano GR-250NSpecs and dimensions

Max lifting capacity
25 t
27.6 US tons
Main boom, extended
30.5 m
100.1 ft
Engine
Cummins QSB6.7-4C

Quick answer

The Tadano GR-250N is a mobile crane with a Cummins QSB6.7-4C engine rated at 201 kW (273 PS). It lifts up to 25 t, reaches a tip height of 31.3 m and drives at up to 49 km/h. It suits lifting steel, precast and plant on building sites and erecting tower cranes and site cabins. Nearest in capacity are the XCMG QY25K5D (25 t) and the Zoomlion ZTC251V452 (25 t).

Tadano GR-250N (illustration)

What engine is in the Tadano GR-250N?

The Tadano GR-250N has a Cummins QSB6.7-4C engine rated at 201 kW (273 PS) gross, maximum output at 2,000 min-1. It displaces 6.7 L and makes 990 Nm (730 lbf·ft) of torque. The fuel tank holds 300 L (79.3 US gal). The figures are from Tadano GR-250N specifications, spec no. GR-250N-4-00101 (X-type outriggers).

Cummins fault codes

How much can a Tadano GR-250N lift?

The Tadano GR-250N lifts up to 25 t, reaches a tip height of 31.3 m and drives at up to 49 km/h. In imperial units the lifting capacity is 27.6 US tons. The sheet notes: at 3.5 m radius on the 9.35 m boom, 8 parts of line. On the same row of their sheets, the XCMG QY25K5D shows 25 t and the Zoomlion ZTC251V452 shows 25 t.

What are the Tadano GR-250N dimensions?

The Tadano GR-250N is 11.53 m (37 ft 10 in) long, 2.62 m (8 ft 7 in) wide and 3.48 m (11 ft 5 in) high. As it stands it is too big for the door of a standard shipping container. The XCMG QY25K5D is 12.78 m long, 2.50 m wide and 3.40 m high.

Tadano GR-250N vs XCMG QY25K5D: what is the difference?

The Tadano GR-250N and the XCMG QY25K5D are both mobile cranes; this is where their sheets differ. The Tadano GR-250N carries more fuel (300 L against 240 L). The XCMG QY25K5D has more gross power (221 kW against 201 kW), has more torque (1,250 Nm against 990 Nm) and is narrower to transport (2.5 m against 2.62 m).

These figures are for the GR-250N. The TR-250M is not covered here and has figures of its own, so check the serial plate before using these for one.

Tadano GR-250N dimensions

Tadano GR-250N, side view with dimensions (illustration)3.48 m11.5 m
Side view
Tadano GR-250N, front view (illustration)2.62 m
Front view
Overall height
3.48 m
Overall length
11.5 m
Overall width
2.62 m

Illustration; figures from the maker's sheet.

How big is the Tadano GR-250N?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Tadano GR-250N drawn to scale beside a person, a pickup truck and a 40 ft container. The Tadano GR-250N is 11.53 m long - 95% of a forty-foot container's length - and 3.48 m tall, 2 times a person's height.Tadano GR-250N11.53 × 3.48 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Tadano GR-250N is 11.53 m long - 95% of a forty-foot container's length - and 3.48 m tall, 2 times a person's height.

Tadano GR-250N load chart

What it lifts as the radius grows, from the maker’s chart. Not for lift planning.

  1. 25 t2.5 m9.3 m boom
  2. 18 t5 m16.4 m boom
  3. 7.6 t10 m23.4 m boom
  4. 7.1 t10 m23.4 m boom
  5. 5 t10 m16.4 m boom
  6. 4.8 t13 m16.4 m boom

Every radius and boom length, 3 configurations, with a reader.

Full load chart

Tadano GR-250N specifications

Figures are the maker's unless marked: est. is our estimate, and any figure from another site names it. Each links to where it came from. Sheet last updated 16 November 2026.

59 figures in 4 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length11.53 mTravelling, boom stowed[1] p.18
Overall width2.62 m[1] p.18
Overall height3.475 m[1] p.18
Wheelbase3.88 m[1] p.18
Boom head to front axle5.48 m[1] p.18
Front axle to front end of carrier1.76 m[1] p.18
Rear overhang (rear axle to end)2.17 m[1] p.18
Dimensions, part 2 of 2
FigureValue (metric)Source
Wheel track, front2.17 m[1] p.18
Wheel track, rear2.17 m[1] p.18
Turning radius, 4-wheel steer5.1 m[1] p.5
Turning radius, 2-wheel steer8.5 m[1] p.5
Outrigger span, transverse (max)6.6 mMaximum extension of the X-type outriggers; middle extensions 6.1 / 5.0 / 3.6 m, minimum 3.1 m[1] p.6
Carrier length7.81 mest.Estimate: 1.76 m + wheelbase 3.88 m + 2.17 m, the three carrier dimensions on the drawing[1] p.18
Boom head to front of carrier3.72 mest.Estimate: boom head to front axle 5.48 m minus front of carrier to front axle 1.76 m[1] p.18

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Gross vehicle weight25,595 kg[1] p.5
Front axle load12,800 kg[1] p.5
Weight, part 2 of 2
FigureValue (metric)Source
Rear axle load12,795 kg[1] p.5
Max outrigger reaction26.9 tMaximum outrigger load[1] p.3

Crane

Crane, part 1 of 2
FigureValue (metric)Source
Max lifting capacity25 tAt 3.5 m radius on the 9.35 m boom, 8 parts of line[1] p.2
Lifting capacity, 16.4 m boom18 tAt 5.0 m radius, 6 parts of line[1] p.2
Lifting capacity, 23.45 m boom12.5 tAt 6.0 m radius, 4 parts of line[1] p.2
Lifting capacity, 30.5 m boom8 tAt 9.0 m radius, 4 parts of line[1] p.2
Lifting capacity, 8.2 m jib3.3 tAt 72 deg boom angle[1] p.2
Lifting capacity, 13.0 m jib2.2 tAt 80 deg boom angle[1] p.2
Lifting capacity, single top4 t1 part of line[1] p.2
Main boom length (m, fully extended)30.5 m[1] p.2
Main boom length retracted (m)9.35 m[1] p.2
Boom sections4 (box-shaped, hydraulic simultaneous telescoping)[1] p.2
Max tip height31.3 mBoom; 44.2 m with jib[1] p.2
Max tip height with jib44.2 m[1] p.2
Max radius27.9 mBoom; 33.9 m with jib[1] p.2
Crane, part 2 of 2
FigureValue (metric)Source
Max radius with jib33.9 m[1] p.2
Jib2-section hydraulic telescoping, 8.2-13.0 m, offsets 5 to 60 deg (stepless, hydraulic)[1] p.2
Boom elevation angle0 to 84 deg[1] p.2
Boom raising time0 to 84 deg in 45 s[1] p.2
Boom extension time21.15 m in 80 s[1] p.2
Main winch single-line speed120 m/min (4th layer); 160 m/min optional high speed[1] p.2
Main winch hook block speed15.0 m/min (8 parts of line)[1] p.2
Auxiliary winch single-line speed120 m/min (4th layer)[1] p.2
Slewing speed2.6 rpm, 360 deg continuous[1] p.2
Main winch rope16 mm x 170 m, flame-retardant[1] p.2
Auxiliary winch rope16 mm x 98 m, flame-retardant[1] p.2
Hook block weight220 kgMain winch hook block[1] p.16
Hydraulic tank380 L[1] p.3

Chassis

Chassis, part 1 of 2
FigureValue (metric)Source
Number of axles2 (4x2 / 4x4 selectable, 4-wheel steer)[1] p.4
Engine modelCummins QSB6.7-4C, 6-cyl turbo, intercooled, urea SCR[1] p.4
Displacement6.7 L[1] p.4
Gross power201 kW (273 PS)Maximum output at 2,000 min-1[1] p.4
Max torque990 NmAt 1,500 min-1[1] p.4
Fuel tank300 L[1] p.4
Urea tank38 L[1] p.4
TransmissionTorque converter with lock-up, power shift (wet multiplate clutch), 3 forward / 1 reverse, Hi/Lo range[1] p.4
Chassis, part 2 of 2
FigureValue (metric)Source
Tyres385/95R25 170E ROAD, front and rear[1] p.4
SuspensionHydropneumatic front and rear, with hydraulic lock cylinders[1] p.4
BrakesHydro-pneumatic disc, parking brake on driveshaft, permanent-magnet retarder, exhaust brake[1] p.4
Top speed49 km/h[1] p.5
Gradeability (max)tan 0.57 (57 %)[1] p.5
SteeringFully hydraulic power steering; 2-wheel and 4-wheel steering; emergency steering device and rear-wheel steering lock[1] p.4
Electrical system24 V, 2 x 12 V 120 Ah batteries[1] p.4

Build: Tadano GR-250N 25 t rough terrain crane (4-section 9.35-30.5 m boom, 2-section full automatic jib, X-type outriggers, Cummins QSB6.7-4C engine) per Tadano's spec sheet GR-250N-4-00101. The older TR-250M has no usable maker spec sheet, so its successor is shown; TR-250M figures differ in detail (for example Mitsubishi 6D16 engine, 9.5-30.5 m boom, 44.2 m jib height).

  1. [1]Tadano GR-250N specifications, spec no. GR-250N-4-00101 (X-type outriggers)

Tadano GR-250N against its rivals

The mobile cranes nearest in weight from other makers, figure by figure, each shown at the same scale.

Tadano GR-250N, XCMG QY25K5D, Zoomlion ZTC251V452, Grove RT540E: specifications side by side
FigureTadano GR-250Nthis pageXCMG QY25K5D specsZoomlion ZTC251V452 specsGrove RT540E specs
Gross power201 kW (273 PS)221 kW (296 hp)199 kW (267 hp)not on its sheet
Max torque990 Nm1,250 Nm1,160 Nm731 Nm
Fuel tank300 L240 Lnot on its sheet219 L
Top speed49 km/hnot on its sheet80 km/h40 km/h
Overall width2.62 m2.5 m2.5 m2.606 m
Overall height3.475 m3.4 m3.47 m3.235 m
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Tadano GR-250N if you need a bigger fuel tank (300 L).
  • Pick the XCMG QY25K5D if you need more gross power (221 kW) and more torque (1,250 Nm).
  • Pick the Zoomlion ZTC251V452 if you need more speed (80 km/h).
  • Pick the Grove RT540E if you need a lower machine to move (3.235 m).

Tadano GR-250N prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

Tadano GR-250N on EquipmentsFinder in the UAE now: 1 listed for rent, 2 listed for sale. Too few carry a price to give a Tadano GR-250N range, so the figure below is for all mobile cranes.

See all 1

Typical hire, per daymedian of 30

AED 2,225 /day

No priced Tadano GR-250N for hire yet: this is all mobile cranes

Low AED 1,000High AED 8,000

Who is asking for mobile cranes in the UAE

Contractors posted 72 requests for mobile cranes on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (33), Abu Dhabi (21) and Sharjah (7). Requests name a kind of machine, not a model, so this counts every mobile crane, the Tadano GR-250N among them.

Requests, last 12 months
72
For Dubai
33
For Abu Dhabi
21
  • Crawler Cranes Required For RentDubai / 20 November 2026
  • Hiab Crane/Truck Crane 10 Ton or Above Required For RentDubai / 19 November 2026
  • 160 TON Crane Required For PurchaseAbu Dhabi / 18 November 2026

Open mobile crane requests on the Inquiry BoardPost a request for a Tadano GR-250N

Tools for a Tadano GR-250N

For the people who run one: codes, charts and calculators that fit a mobile crane.

Popular Tadano mobile crane models

Tadano GR-250N fault codes and serial number

More Tadano GR-250N questions

How much does a Tadano GR-250N weigh?

25.6 tonnes: 25,595 kg (56,427 lb).

How long is the Tadano GR-250N's boom?

The main boom extends to 30.5 m (100.1 ft).

How high can a Tadano GR-250N lift?

Its maximum tip height is 31.3 m (102.7 ft).

How much horsepower does the Tadano GR-250N have?

270 hp (201 kW) gross, Maximum output at 2,000 min-1.

How many axles does a Tadano GR-250N have?

2 (4x2 / 4x4 selectable, 4-wheel steer).

What is the outrigger spread of a Tadano GR-250N?

6.6 m (21.7 ft) across.

How long is the jib on a Tadano GR-250N?

2-section hydraulic telescoping, 8.2-13.0 m, offsets 5 to 60 deg (stepless, hydraulic).

How tall is a Tadano GR-250N?

3.48 m (11 ft 5 in) overall.

How wide is a Tadano GR-250N?

2.62 m (8 ft 7 in) overall.

What are the Tadano GR-250N's main competitors?

The machines nearest it in size are the XCMG QY100K5C, the Liebherr LTM 1500-8.1 and the Liebherr LTM 1100-4.2. Each has a side-by-side comparison on EquipmentsFinder.

Is the Tadano GR-250N sold in the UAE?

Yes. The Tadano GR-250N is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Tadano GR-250N used for?

A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far. Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.

Embed this spec card

The Tadano GR-250N's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/tadano-gr250n" title="Tadano GR-250N specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/tadano-gr250n">Tadano GR-250N specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Tadano GR-250N on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.