Specification sheetIssued 20 November 2026
Tadano · mobile crane
Tadano GR-250N
Tadano GR-250N 25 t rough terrain crane (4-section 9.35-30.5 m boom, 2-section full automatic jib, X-type outriggers, Cummins QSB6.7-4C engine) per Tadano's spec sheet GR-250N-4-00101. The older TR-250M has no usable maker spec sheet, so its successor is shown; TR-250M figures differ in detail (for example Mitsubishi 6D16 engine, 9.5-30.5 m boom, 44.2 m jib height).
UAEGlobal
- lifting capacity
- 25 t
- Main boom length (m, fully extended)
- 30.5 m
- tip height
- 31.3 m
- power
- 201 kW (273 PS)
3.48 m11.5 m
2.62 mDimensions
- Wheel track, front
- 2.17 m
- Wheel track, rear
- 2.17 m
- Turning radius, 4-wheel steer
- 5.1 m
- Turning radius, 2-wheel steer
- 8.5 m
- Outrigger span, transverse (max) (Maximum extension of the X-type outriggers; middle extensions 6.1 / 5.0 / 3.6 m, minimum 3.1 m)
- 6.6 m
- Carrier length (Estimate: 1.76 m + wheelbase 3.88 m + 2.17 m, the three carrier dimensions on the drawing)
- 7.81 mest.
- Boom head to front of carrier (Estimate: boom head to front axle 5.48 m minus front of carrier to front axle 1.76 m)
- 3.72 mest.
Weight
- Gross vehicle weight
- 25,595 kg
- Front axle load
- 12,800 kg
- Rear axle load
- 12,795 kg
- Max outrigger reaction (Maximum outrigger load)
- 26.9 t
Crane
- Max lifting capacity (At 3.5 m radius on the 9.35 m boom, 8 parts of line)
- 25 t
- Lifting capacity, 16.4 m boom (At 5.0 m radius, 6 parts of line)
- 18 t
- Lifting capacity, 23.45 m boom (At 6.0 m radius, 4 parts of line)
- 12.5 t
- Lifting capacity, 30.5 m boom (At 9.0 m radius, 4 parts of line)
- 8 t
- Lifting capacity, 8.2 m jib (At 72 deg boom angle)
- 3.3 t
- Lifting capacity, 13.0 m jib (At 80 deg boom angle)
- 2.2 t
- Lifting capacity, single top (1 part of line)
- 4 t
- Main boom length (m, fully extended)
- 30.5 m
- Main boom length retracted (m)
- 9.35 m
- Boom sections
- 4 (box-shaped, hydraulic simultaneous telescoping)
- Max tip height (Boom; 44.2 m with jib)
- 31.3 m
- Max tip height with jib
- 44.2 m
- Max radius (Boom; 33.9 m with jib)
- 27.9 m
- Max radius with jib
- 33.9 m
- Jib
- 2-section hydraulic telescoping, 8.2-13.0 m, offsets 5 to 60 deg (stepless, hydraulic)
- Boom elevation angle
- 0 to 84 deg
- Boom raising time
- 0 to 84 deg in 45 s
- Boom extension time
- 21.15 m in 80 s
- Main winch single-line speed
- 120 m/min (4th layer); 160 m/min optional high speed
- Main winch hook block speed
- 15.0 m/min (8 parts of line)
- Auxiliary winch single-line speed
- 120 m/min (4th layer)
- Slewing speed
- 2.6 rpm, 360 deg continuous
- Main winch rope
- 16 mm x 170 m, flame-retardant
- Auxiliary winch rope
- 16 mm x 98 m, flame-retardant
- Hook block weight (Main winch hook block)
- 220 kg
- Hydraulic tank
- 380 L
Chassis
- Number of axles
- 2 (4x2 / 4x4 selectable, 4-wheel steer)
- Engine model
- Cummins QSB6.7-4C, 6-cyl turbo, intercooled, urea SCR
- Displacement
- 6.7 L
- Gross power (Maximum output at 2,000 min-1)
- 201 kW (273 PS)
- Max torque (At 1,500 min-1)
- 990 Nm
- Fuel tank
- 300 L
- Urea tank
- 38 L
- Transmission
- Torque converter with lock-up, power shift (wet multiplate clutch), 3 forward / 1 reverse, Hi/Lo range
- Tyres
- 385/95R25 170E ROAD, front and rear
- Suspension
- Hydropneumatic front and rear, with hydraulic lock cylinders
- Brakes
- Hydro-pneumatic disc, parking brake on driveshaft, permanent-magnet retarder, exhaust brake
- Top speed
- 49 km/h
- Gradeability (max)
- tan 0.57 (57 %)
- Steering
- Fully hydraulic power steering; 2-wheel and 4-wheel steering; emergency steering device and rear-wheel steering lock
- Electrical system
- 24 V, 2 x 12 V 120 Ah batteries