EF Logo

mobile cranemade by ZoomlionUAE, Global

Zoomlion ZTC251V452Specs and dimensions

Max lifting capacity
25 t
55,116 lb
Main boom, extended
35 m
114 ft 10 in
Engine
Weichai WP7.270E51

Quick answer

The Zoomlion ZTC251V452 is a mobile crane with a Weichai WP7.270E51 engine rated at 199 kW (267 hp). It lifts up to 25 t, reaches a tip height of 35.4 m and drives at up to 80 km/h. It suits lifting steel, precast and plant on building sites and erecting tower cranes and site cabins. Its rivals include the XCMG QY25K5D (25 t) and the Tadano GR-250N (25 t).

Zoomlion ZTC251V452 (illustration)

What engine is in the Zoomlion ZTC251V452?

The Zoomlion ZTC251V452 is offered with Weichai WP7.270E51, China V (GB 3847-2018). The sheet's power figure is 199 kW (267 hp) gross (At 2,100 rpm). It makes 1,160 Nm (856 lbf·ft) of torque. The figures are from Zoomlion ZLJ5300JQZ25E (ZTC251V452/27Y) truck crane technical specifications, Cranepedia-hosted copy. Engines differ by market and emissions stage, so check the engine plate before ordering parts.

How much can a Zoomlion ZTC251V452 lift?

The Zoomlion ZTC251V452 lifts up to 25 t, reaches a tip height of 35.4 m and drives at up to 80 km/h. In imperial units the lifting capacity is 55,116 lb. The sheet notes: at 3 m radius (minimum rated radius). On the same row of their sheets, the XCMG QY25K5D shows 25 t and the Tadano GR-250N shows 25 t.

What are the Zoomlion ZTC251V452 dimensions?

The Zoomlion ZTC251V452 is 12.64 m (41 ft 6 in) long, 2.50 m (8 ft 2 in) wide and 3.47 m (11 ft 5 in) high. As it stands it is too big for the door of a standard shipping container. The XCMG QY25K5D is 12.78 m long, 2.50 m wide and 3.40 m high.

Zoomlion ZTC251V452 vs XCMG QY25K5D: what is the difference?

The Zoomlion ZTC251V452 and the XCMG QY25K5D are both mobile cranes; this is where their sheets differ. The XCMG QY25K5D has more gross power (221 kW against 199 kW), has more torque (1,250 Nm against 1,160 Nm) and is lower to transport (3.4 m against 3.47 m). Both sets of figures are the makers’ own, for the builds on our sheets.

These figures are for the ZTC251V452. The ZTC250V431 is not covered here and has figures of its own, so check the serial plate before using these for one.

Zoomlion ZTC251V452 dimensions

Zoomlion ZTC251V452, side view with dimensions (illustration)3.47 m12.6 m
Side view
Zoomlion ZTC251V452, front view (illustration)2.5 m
Front view
Overall height
3.47 m
Overall length
12.6 m
Overall width
2.5 m

Illustration; figures from the maker's sheet.

How big is the Zoomlion ZTC251V452?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Zoomlion ZTC251V452 drawn to scale beside a person, a pickup truck and a 40 ft container. The Zoomlion ZTC251V452 is 12.64 m long - about the length of a forty-foot container - and 3.47 m tall, 2 times a person's height.Zoomlion ZTC251V45212.64 × 3.47 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Zoomlion ZTC251V452 is 12.64 m long - about the length of a forty-foot container - and 3.47 m tall, 2 times a person's height.

Zoomlion ZTC251V452 load chart

What it lifts as the radius grows, from the maker’s chart. Not for lift planning.

  1. 25 t3 m10.7 m boom
  2. 8.6 t10 m20.3 m boom
  3. 2.8 t20 m35 m boom
  4. 1 t30 m35 m boom

Every radius and boom length, 2 configurations, with a reader.

Full load chart

Zoomlion ZTC251V452 specifications

Figures are the maker's unless marked: est. is our estimate, and any figure from another site names it. Each links to where it came from. Sheet last updated 17 November 2026.

50 figures in 4 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length12.64 m[1] p.3
Overall width2.5 m[1] p.3
Overall height3.47 m[1] p.3
Ground clearance (minimum)0.25 m[1] p.3
Front extension (boom nose to bumper)2.228 mPrinted in brackets on the drawing[1] p.10
Front overhang2.58 m[1] p.10
Axle spacing, axles 1-24.225 m[1] p.10
Axle spacing, axles 2-31.35 m[1] p.10
Dimensions, part 2 of 2
FigureValue (metric)Source
Rear overhang2.717 mAs printed on the drawing; with the 12.64 m table length the frame ends about 2.26 m behind the last axle in our drawing[1] p.10
Overall length per drawing13.1 mTotal printed on the drawing; the table gives 12.64 m[1] p.10
Tail slewing radius3.265 m[1] p.4
Outrigger span, longitudinal5.37 m[1] p.3
Outrigger span, transverse (max)6.2 m4.25 m with outriggers intermediately extended[1] p.4
Turning diameter (min)20 m or less[1] p.3
Carrier length10.872 mest.Estimate: front overhang 2.58 m + axle spacings 4.225 / 1.35 m + rear overhang 2.717 m (front bumper to rear of frame)[1] p.10

Weight

Weight
FigureValue (metric)Source
Gross vehicle weight29,600 kgDeadweight in driving condition; kerb mass 29,470 kg[1] p.3
Axle load, front / rear6,600 kg / 23,000 kg (two rear axles)[1] p.3

Crane

Crane, part 1 of 2
FigureValue (metric)Source
Max lifting capacity25 tAt 3 m radius (minimum rated radius)[1] p.3
Main boom length (m, fully extended)35 m[1] p.4
Main boom length retracted (m)10.7 m[1] p.4
Boom sections4, box-type U-shaped, one telescoping cylinder with synchronous mechanism[1] p.11
Max tip height35.4 mFully extended main boom[1] p.3
Max tip height with jib43 m[1] p.3
Jib8 m single-section lattice jib, offsets 0 / 15 / 30 deg[1] p.4
Max load moment, basic boom960 kN.m[1] p.3
Max load moment, fully extended boom672 kN.m[1] p.3
Rated capacity, 10.7 m boom at 8 m radius11 tOutriggers fully extended, over sides and rear, 25 t hook with 8 parts of line[1] p.6
Rated capacity, 35 m boom at 8 m radius7.6 tSame table[1] p.6
Rated capacity, 35 m boom at 30 m radius1 tSame table[1] p.6
Rated capacity, 35 m boom with jib at 80 deg3 t3 t hook, jib at 0 deg offset, outriggers fully extended[1] p.8
Crane, part 2 of 2
FigureValue (metric)Source
Boom elevation angle-1 to 80 deg[1] p.11
Boom raising time25 s[1] p.3
Boom extension time64 s[1] p.3
Main winch single-line speed0-120 m/min (4th layer)[1] p.3
Auxiliary winch single-line speed0-120 m/min (4th layer)[1] p.3
Main winch rope17 mm x 160 m, grade 1870 N/mm2[1] p.12
Auxiliary winch rope17 mm x 95 m, grade 1870 N/mm2[1] p.12
Slewing speed0-2.7 rpm, 360 deg continuous[1] p.3
Hooks25 t main hook with 4 sheaves; 4 t auxiliary hook (1 part of line)[1] p.12
Hydraulic systemOpen circuit, quadruple gear pump, pilot proportional control; 5th outrigger under the cab[1] p.13
Max wind speed for operation14.1 m/s (3 s gust)[1] p.16
Operating temperature range-20 to +40 deg C, altitude up to 2,000 m[1] p.16

Chassis

Chassis, part 1 of 2
FigureValue (metric)Source
Number of axles3 (6x4)Zoomlion special-purpose chassis ZLJ5310JQZV5[1] p.2
Engine modelWeichai WP7.270E51, China V (GB 3847-2018)[1] p.15
Gross power199 kW (267 hp)At 2,100 rpm[1] p.15
Max torque1,160 NmAt 1,200-1,700 rpm[1] p.15
Chassis, part 2 of 2
FigureValue (metric)Source
Top speed80 km/h[1] p.3
Gradeability (max)40 %[1] p.3
Fuel consumption per 100 km28 L[1] p.3
Electrical system24 V DC, two-wire system[1] p.13

Build: Zoomlion ZTC251V452 (ZLJ5300JQZ25E) 25 t truck crane, the current 4-section 10.7-35 m model in the ZTC250 class (6x4 chassis, Weichai WP7.270E51 China V engine) per Zoomlion's technical specification ZTC251V452/27Y, Cranepedia-hosted copy. The drawing numbers on the page are ours; the maker's drawing carries no letters.

  1. [1]Zoomlion ZLJ5300JQZ25E (ZTC251V452/27Y) truck crane technical specifications, Cranepedia-hosted copy

Zoomlion ZTC251V452 against its rivals

The mobile cranes nearest in weight from other makers, figure by figure, each shown at the same scale.

Zoomlion ZTC251V452, XCMG QY25K5D, Tadano GR-250N, Grove RT540E: specifications side by side
FigureZoomlion ZTC251V452this pageXCMG QY25K5D specsTadano GR-250N specsGrove RT540E specs
Gross power199 kW (267 hp)221 kW (296 hp)201 kW (273 PS)not on its sheet
Max torque1,160 Nm1,250 Nm990 Nm731 Nm
Fuel tanknot on its sheet240 L300 L219 L
Top speed80 km/hnot on its sheet49 km/h40 km/h
Overall width2.5 m2.5 m2.62 m2.606 m
Overall height3.47 m3.4 m3.475 m3.235 m
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Zoomlion ZTC251V452 if you need more speed (80 km/h).
  • Pick the XCMG QY25K5D if you need more gross power (221 kW) and more torque (1,250 Nm).
  • Pick the Tadano GR-250N if you need a bigger fuel tank (300 L).
  • Pick the Grove RT540E if you need a lower machine to move (3.235 m).

Zoomlion ZTC251V452 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

No Zoomlion ZTC251V452 is listed in the UAE on EquipmentsFinder right now. The prices below are for all mobile cranes, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 30

AED 2,225 /day

No priced Zoomlion ZTC251V452 for hire yet: this is all mobile cranes

Low AED 1,000High AED 8,000

No Zoomlion ZTC251V452 for rent listed right now.

Request a Zoomlion ZTC251V452

Who is asking for mobile cranes in the UAE

Contractors posted 72 requests for mobile cranes on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (33), Abu Dhabi (21) and Sharjah (7). Requests name a kind of machine, not a model, so this counts every mobile crane, the Zoomlion ZTC251V452 among them.

Requests, last 12 months
72
For Dubai
33
For Abu Dhabi
21
  • Crawler Cranes Required For RentDubai / 20 November 2026
  • Hiab Crane/Truck Crane 10 Ton or Above Required For RentDubai / 19 November 2026
  • 160 TON Crane Required For PurchaseAbu Dhabi / 18 November 2026

Open mobile crane requests on the Inquiry BoardPost a request for a Zoomlion ZTC251V452

Tools for a Zoomlion ZTC251V452

For the people who run one: codes, charts and calculators that fit a mobile crane.

Popular Zoomlion mobile crane models

More Zoomlion ZTC251V452 questions

How much does a Zoomlion ZTC251V452 weigh?

29.6 tonnes: 29,600 kg (65,257 lb).

How long is the Zoomlion ZTC251V452's boom?

The main boom extends to 35 m (114 ft 10 in).

How high can a Zoomlion ZTC251V452 lift?

Its maximum tip height is 35.4 m (116 ft 2 in), fully extended main boom.

How many axles does a Zoomlion ZTC251V452 have?

3 (6x4).

What is the outrigger spread of a Zoomlion ZTC251V452?

6.2 m (20 ft 4 in) across.

How long is the jib on a Zoomlion ZTC251V452?

8 m single-section lattice jib, offsets 0 / 15 / 30 deg.

How tall is a Zoomlion ZTC251V452?

3.47 m (11 ft 5 in) overall.

What is the tail swing radius of a Zoomlion ZTC251V452?

3.265 m (10 ft 9 in).

How wide is a Zoomlion ZTC251V452?

2.50 m (8 ft 2 in) overall.

What are the Zoomlion ZTC251V452's main competitors?

The machines nearest it in size are the XCMG QY100K5C, the Liebherr LTM 1500-8.1 and the Liebherr LTM 1100-4.2. Each has a side-by-side comparison on EquipmentsFinder.

Is the Zoomlion ZTC251V452 sold in the UAE?

Yes. The Zoomlion ZTC251V452 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Zoomlion ZTC251V452 used for?

A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far. Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.

Embed this spec card

The Zoomlion ZTC251V452's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/zoomlion-ztc250" title="Zoomlion ZTC251V452 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/zoomlion-ztc250">Zoomlion ZTC251V452 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Zoomlion ZTC251V452 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.