Mobile crane · 25 t class
Tadano GR-250N load chart
What the GR-250N lifts at each radius and boom length. From the maker's own chart.
- Most in this chart
- 25 t
- Longest boom in chart
- 30.5 m
- Furthest radius
- 27.9 m
- Configurations
- 3
Not for lift planning. This chart is for sizing and comparing cranes. A real lift uses the chart and load moment indicator on the crane itself, for its exact counterweight, outrigger base, boom and jib, and a lift plan by a competent person. Capacities here include the hook block and slings as the maker's chart states.
Read the chart
Boom length
Chart capacity
25t
at 2.5 m radius on 9.35 m of boom
| Radius \ Boom | 9.35 m | 16.4 m | 23.4 m | 30.5 m |
|---|---|---|---|---|
| 2.5 m | 25 | 18 | 12.5 | · |
| 3 m | 25 | 18 | 12.5 | · |
| 3.5 m | 25 | 18 | 12.5 | 8 |
| 4 m | 23.5 | 18 | 12.5 | 8 |
| 4.5 m | 21.5 | 18 | 12.5 | 8 |
| 5 m | 19.6 | 18 | 12.5 | 8 |
| 5.5 m | 17.8 | 17 | 12.5 | 8 |
| 6 m | 16.3 | 16 | 12.5 | 8 |
| 6.5 m | 15.1 | 15 | 12.3 | 8 |
| 7 m | · | 14 | 11.5 | 8 |
| 8 m | · | 11.4 | 10.2 | 8 |
| 9 m | · | 9.3 | 9 | 8 |
| 10 m | · | 7.8 | 7.6 | 7.15 |
| 11 m | · | 6.5 | 6.65 | 6.4 |
| 12 m | · | 5.55 | 5.8 | 5.6 |
| 13 m | · | 4.75 | 5 | 4.9 |
| 13.5 m | · | 4.45 | 4.65 | 4.6 |
| 14 m | · | · | 4.35 | 4.4 |
| 15 m | · | · | 3.85 | 3.9 |
| 16 m | · | · | 3.4 | 3.45 |
| 17 m | · | · | 3 | 3.05 |
| 18 m | · | · | 2.65 | 2.7 |
| 19 m | · | · | 2.35 | 2.4 |
| 20 m | · | · | 2.1 | 2.15 |
| 20.5 m | · | · | 2 | 2.05 |
| 21 m | · | · | · | 1.95 |
| 22 m | · | · | · | 1.75 |
| 24 m | · | · | · | 1.4 |
| 26 m | · | · | · | 1.1 |
| 27.9 m | · | · | · | 0.9 |
Tonnes. Darker cells lift more. Click a cell to read it. A dot means the chart gives no figure there.
Key figures
| Radius | Boom | Capacity |
|---|---|---|
| 2.5 m | 9.3 m | 25 t |
| 5 m | 16.4 m | 18 t |
| 10 m | 23.4 m | 7.6 t |
| 15 m | 30.5 m | 3.9 t |
| 20 m | 30.5 m | 2.1 t |
| 10 m | 23.4 m | 7.1 t |
| 10 m | 16.4 m | 5 t |
| 13 m | 16.4 m | 4.8 t |
Source and notes
Tadano GR-250N spec sheet GR-250N-4-00101, rated lifting capacity tables p.5-6
Capacities in tonnes; they include the weight of the lifting devices and main hook block (220 kg) per the maker
Values above the bold line in the maker chart are structural-strength limited, values below are stability limited
Boom 9.35-30.5 m, X-type outriggers; 360° only on the fully extended 6.6 m setting, the other tables are over side
Figures copied as the chart gives them - nothing is interpolated. Charts change between model generations and software versions: check the one for your crane's serial number.
Need this crane?
25 t cranes for hire across the UAE - suppliers send you prices.
