EF Logo

mobile cranemade by TadanoUAE, Global

Tadano ATF 220G-5Specs and dimensions

Max lifting capacity
220 t
242.5 US tons
Main boom, extended
68 m
223 ft 1 in
Engine
Mercedes-Benz OM 502 LA

Quick answer

The Tadano ATF 220G-5 is a mobile crane with a Mercedes-Benz OM 502 LA engine rated at 390 kW (523 hp). It lifts up to 220 t and drives at up to 85 km/h. It suits lifting steel, precast and plant on building sites and erecting tower cranes and site cabins. Its rivals include the Liebherr LTM 1250-5.1 (250 t) and the Liebherr LTM 1230-5.1 (230 t).

Tadano ATF 220G-5 (illustration)

What engine is in the Tadano ATF 220G-5?

The Tadano ATF 220G-5 is offered with Mercedes-Benz OM 502 LA, 8-cyl diesel, Euromot IIIA / EPA III, water-cooled. The sheet's power figure is 390 kW (523 hp) net (At 1,800 rpm, rated to 80/1269/EEC (530 PS)). It makes 2,400 Nm (1,770 lbf-ft) of torque. The fuel tank holds 530 L (140 gal).

How much can a Tadano ATF 220G-5 lift?

The Tadano ATF 220G-5 lifts up to 220 t and drives at up to 85 km/h. In imperial units the lifting capacity is 242.5 US tons. The sheet notes: at 2.5 m radius, 13.2 m boom over the rear, with additional lifting equipment, 71 t counterweight; 180 t at 3 m.

What are the Tadano ATF 220G-5 dimensions?

The Tadano ATF 220G-5 is 15.11 m (49 ft 7 in) long, 3.00 m (9 ft 10 in) wide and 3.94 m (12 ft 11 in) high. As it stands it is too big for the door of a standard shipping container. The Liebherr LTM 1250-5.1 is 15.96 m long, 3.00 m wide and 3.95 m high.

Tadano ATF 220G-5 vs Liebherr LTM 1250-5.1: what is the difference?

The Tadano ATF 220G-5 and the Liebherr LTM 1250-5.1 are both mobile cranes; this is where their sheets differ. The Tadano ATF 220G-5 is faster (85 km/h against 80 km/h) and is lower to transport (3.94 m against 3.95 m). The Liebherr LTM 1250-5.1 has more torque (2,516 Nm against 2,400 Nm) and carries more fuel (750 L against 530 L).

Tadano ATF 220G-5 dimensions

Tadano ATF 220G-5, side view with dimensions (illustration)3.94 m15.1 m
Side view
Tadano ATF 220G-5, front view (illustration)3 m
Front view
Overall height
3.94 m
Overall length
15.1 m
Overall width
3 m

Illustration; figures from the maker's sheet.

How big is the Tadano ATF 220G-5?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Tadano ATF 220G-5 drawn to scale beside a person, a pickup truck and a 40 ft container. The Tadano ATF 220G-5 is 15.11 m long - about 1.2 forty-foot containers - and 3.94 m tall, 2.3 times a person's height.Tadano ATF 220G-515.11 × 3.94 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Tadano ATF 220G-5 is 15.11 m long - about 1.2 forty-foot containers - and 3.94 m tall, 2.3 times a person's height.

Tadano ATF 220G-5 load chart

What it lifts as the radius grows, from the maker’s chart. Not for lift planning.

  1. 103.5 t4.5 m25.8 m boom
  2. 64 t10 m21.6 m boom
  3. 57.5 t10 m25.8 m boom
  4. 51.7 t10 m25.8 m boom
  5. 37.6 t10 m25.8 m boom
  6. 30 t20 m38.3 m boom

Every radius and boom length, 4 configurations, with a reader.

Full load chart

Tadano ATF 220G-5 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

46 figures in 4 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall height3.94 m-118 / +158 mm by suspension setting[1] p.2
Overall width3 m14.00 R 25 and 16.00 R 25 tyres; 3.2 m with 20.5 R 25[1] p.2
Overall length15.105 mBoom head to rear of carrier[1] p.2
Carrier length13.425 mFront of carrier to rear of carrier[1] p.2
Height to top of superstructure3.642 m-118 / +158 mm by suspension setting[1] p.2
Height to top of counterweight3.101 m-118 / +158 mm by suspension setting[1] p.2
Ground clearance (minimum)0.347 m-118 / +158 mm by suspension setting[1] p.2
Approach angle21°[1] p.2
Dimensions, part 2 of 2
FigureValue (metric)Source
Departure angle15°[1] p.2
Boom head to front of carrier1.6 m[1] p.2
Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / rear overhang2.536 / 2.7 / 1.65 / 2.44 / 1.7 / 2.399 m[1] p.2
Slewing centre to rear of counterweight4.949 m[1] p.2
Tail slewing radius4.98 m71 t counterweight; the dimension drawing shows R 4.98 m and R 4.217 m[1] p.41
Outrigger span, longitudinal9.045 m8.9755 m on the other side of the slewing centre; the equipment text quotes 9.01 m[1] p.2
Outrigger span, transverse (max)8.3 mIntermediate 5.6 m[1] p.2

Weight

Weight
FigureValue (metric)Source
Gross vehicle weight60,000 kgRoad travel, 12 t per axle on all five axles[1] p.3
Counterweight versions12 t / 23.5 t / 35 t / 47 t / 71 t total, divisible[1] p.41

Crane

Crane, part 1 of 2
FigureValue (metric)Source
Max lifting capacity220 tAt 2.5 m radius, 13.2 m boom over the rear, with additional lifting equipment, 71 t counterweight; 180 t at 3 m[1] p.4
Main boom length (m, fully extended)68 m[1] p.43
Main boom length retracted (m)13.2 m[1] p.43
Boom sections7 (1 base section + 6 telescopic sections, 1 telescopic cylinder)[1] p.43
Counterweight71 tTotal, divisible; 12 t, 23.5 t, 35 t and 47 t variants[1] p.43
Boom extensions13.2 m to 37.2 m; heavy-duty jib 5.4 m (optional)[1] p.43
Boom elevation angle-1.5 to +84 deg[1] p.3
Boom elevation timeApprox. 50 s[1] p.3
Crane, part 2 of 2
FigureValue (metric)Source
Boom extension timeApprox. 500 s from 13.2 m to 68 m[1] p.3
Hoist 1 single-line speed0-128 m/min; 21 mm rope, 320 m, 98 kN pull[1] p.3
Hoist 2 single-line speed0-128 m/min; 21 mm rope, 320 m, 98 kN pull (second hoist is optional)[1] p.3
Slewing speed0-1.2 rpm, 360 deg[1] p.3
Hook block, 160 t1,600 kg9 sheaves, 19 lines; 125 t 1,350 kg (7 / 15), 80 t 1,150 kg (5 / 11), 63 t 850 kg (3 / 7), 25 t 450 kg (1 / 3), 10 t 300 kg (1 line)[1] p.3
Superstructure engine modelMercedes-Benz OM 906 LA, 6-cyl diesel, Euromot IIIA / EPA III, water-cooled[1] p.43
Superstructure engine power138 kW (188 PS)At 1,800 rpm; torque 750 Nm at 1,200-1,600 rpm; fuel tank 250 L[1] p.43
Hydraulic systemDiesel-hydraulic, 3 circuits: 1 double axial piston pump, 1 axial piston pump, 1 gear pump[1] p.43

Chassis

Chassis, part 1 of 2
FigureValue (metric)Source
Number of axles5; axles 1, 2, 4 and 5 steered, axle 3 not steered, not driven and liftable; drive 10x8, 10x6 optional[1] p.43
Engine modelMercedes-Benz OM 502 LA, 8-cyl diesel, Euromot IIIA / EPA III, water-cooled[1] p.43
Net power390 kW (523 hp)At 1,800 rpm, rated to 80/1269/EEC (530 PS)[1] p.43
Max torque2,400 NmAt 1,300 rpm[1] p.43
Fuel tank530 LCarrier[1] p.43
TransmissionZF AS-Tronic 16 AS 2602, 16 forward / 2 reverse, electro-pneumatic dry clutch, two-speed transfer case[1] p.43
Tyres14.00 R 25 (385/95 R 25); 16.00 R 25 and 20.5 R 25 optional[1] p.43
Chassis, part 2 of 2
FigureValue (metric)Source
SuspensionHydropneumatic with level control[1] p.43
BrakesDual-circuit air brake, spring-brake parking brake on axles 2, 4 and 5, intarder and exhaust flap brake as continuous brakes[1] p.43
Top speed85 km/h14.00 R 25 and 16.00 R 25 tyres[1] p.3
Gradeability (max)52 % on-road range, 69 % off-road range (14.00 R 25); 47 % / 61 % with 16.00 R 25[1] p.3
SteeringZF-Servocom dual-circuit hydraulic steering with emergency steering pump; front two axles steered mechanically with hydraulic assist; automatic steering of axle 4 up to 25 kph and axle 5 up to 50 kph[1] p.43
Electrical system24 V DC, 2 batteries; CAN-bus with Faun CSS self-diagnosis[1] p.43

Build: Tadano Faun ATF 220G-5, 5-axle 220 t all-terrain crane (carrier engine Mercedes-Benz OM 502 LA 390 kW, 14.00 R 25 tyres, 13.2-68 m telescopic boom, 71 t counterweight) per the metric Tadano Faun data sheet with load charts, dealer-hosted copy; the later Tier 4f / Stage IV North American version uses a different carrier engine and is not covered.

  1. [1]Tadano Faun ATF 220G-5 technical data and load charts (metric), Nordic Crane-hosted copy
  2. [2]Tadano ATF 220G-5 technical data, North America (Tier 4f), FreeCraneSpecs-hosted copy

Tadano ATF 220G-5 against its rivals

The mobile cranes nearest in weight from other makers, figure by figure, each shown at the same scale.

Tadano ATF 220G-5, Liebherr LTM 1250-5.1, Liebherr LTM 1230-5.1, Grove GMK5250L: specifications side by side
FigureTadano ATF 220G-5this pageLiebherr LTM 1250-5.1 specsLiebherr LTM 1230-5.1 specsGrove GMK5250L specs
Max torque2,400 Nm2,516 Nm2,516 Nm2,460 Nm
Fuel tank530 L750 L650 L650 L
Top speed85 km/h80 km/h80 km/h85 km/h
Overall height3.94 m3.95 m3.95 m3.95 m
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Tadano ATF 220G-5 if you need a lower machine to move (3.94 m).
  • Pick the Liebherr LTM 1250-5.1 if you need a bigger fuel tank (750 L).

Tadano ATF 220G-5 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

No Tadano ATF 220G-5 is listed in the UAE on EquipmentsFinder right now. The prices below are for all mobile cranes, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 30

AED 2,225 /day

No priced Tadano ATF 220G-5 for hire yet: this is all mobile cranes

Low AED 1,000High AED 8,000

No Tadano ATF 220G-5 for rent listed right now.

Request a Tadano ATF 220G-5

Who is asking for mobile cranes in the UAE

Contractors posted 72 requests for mobile cranes on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (33), Abu Dhabi (21) and Sharjah (7). Requests name a kind of machine, not a model, so this counts every mobile crane, the Tadano ATF 220G-5 among them.

Requests, last 12 months
72
For Dubai
33
For Abu Dhabi
21
  • Crawler Cranes Required For RentDubai / 20 November 2026
  • Hiab Crane/Truck Crane 10 Ton or Above Required For RentDubai / 19 November 2026
  • 160 TON Crane Required For PurchaseAbu Dhabi / 18 November 2026

Open mobile crane requests on the Inquiry BoardPost a request for a Tadano ATF 220G-5

Tools for a Tadano ATF 220G-5

For the people who run one: codes, charts and calculators that fit a mobile crane.

Ranked: Mobile cranes by lifting capacity

By maximum lifting capacity, largest first. The Tadano ATF 220G-5 is 10 of 25; every figure is the maker's.

  1. 6Liebherr LTM 1300-6.2300 t
  2. 7Grove GMK5250L250 t
  3. 8Liebherr LTM 1250-5.1250 t
  4. 9Liebherr LTM 1230-5.1230 t
  5. 10Tadano ATF 220G-5This page220 t
  6. 11Liebherr LTM 1160-5.2180 t
  7. 12SANY STC1600T7160 t
  8. 13Liebherr LTM 1100-4.2100 t
  9. 14SANY STC1000T6100 t

Showing 6 to 14 of 25, the machines nearest the Tadano ATF 220G-5 by maximum lifting capacity.

Popular Tadano mobile crane models

More Tadano ATF 220G-5 questions

How much does a Tadano ATF 220G-5 weigh?

60 tonnes: 60,000 kg (132,277 lb).

How long is the Tadano ATF 220G-5's boom?

The main boom extends to 68 m (223 ft 1 in).

How heavy is the counterweight on a Tadano ATF 220G-5?

71 t (78.3 US tons).

How many axles does a Tadano ATF 220G-5 have?

5; axles 1, 2, 4 and 5 steered, axle 3 not steered, not driven and liftable; drive 10x8, 10x6 optional.

What is the outrigger spread of a Tadano ATF 220G-5?

8.3 m (27 ft 3 in) across, intermediate 5.6 m.

How tall is a Tadano ATF 220G-5?

3.94 m (12 ft 11 in) overall.

What is the tail swing radius of a Tadano ATF 220G-5?

4.98 m (16 ft 4 in).

How wide is a Tadano ATF 220G-5?

3.00 m (9 ft 10 in) overall.

How long is a Tadano ATF 220G-5?

15.11 m (49 ft 7 in) overall.

What are the Tadano ATF 220G-5's main competitors?

The machines nearest it in size are the XCMG QY100K5C, the Liebherr LTM 1500-8.1 and the Liebherr LTM 1100-4.2. Each has a side-by-side comparison on EquipmentsFinder.

Is the Tadano ATF 220G-5 sold in the UAE?

Yes. The Tadano ATF 220G-5 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Tadano ATF 220G-5 used for?

A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far. Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.

Embed this spec card

The Tadano ATF 220G-5's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/tadano-atf220g" title="Tadano ATF 220G-5 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/tadano-atf220g">Tadano ATF 220G-5 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Tadano ATF 220G-5 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.