EF Logo

mobile cranemade by LiebherrUAE, Global

Liebherr LTM 1230-5.1Specs and dimensions

Max lifting capacity
230 t
253.5 US tons
Main boom, extended
75 m
246.1 ft
Engine
Liebherr 6-cyl diesel

Quick answer

The Liebherr LTM 1230-5.1 is a mobile crane with a Liebherr 6-cyl diesel engine rated at 400 kW (544 hp). It lifts up to 230 t, reaches a tip height of 111 m and drives at up to 80 km/h. It suits lifting steel, precast and plant on building sites. Its rivals include the Liebherr LTM 1250-5.1 (250 t) and the Tadano ATF 220G-5 (220 t).

Liebherr LTM 1230-5.1 (illustration)

What engine is in the Liebherr LTM 1230-5.1?

The Liebherr LTM 1230-5.1 is offered with Liebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96; single engine also drives the crane. The sheet's power figure is 400 kW (544 hp) gross. It makes 2,516 Nm (1,856 lbf·ft) of torque. The fuel tank holds 650 L (171.7 US gal).

How much can a Liebherr LTM 1230-5.1 lift?

The Liebherr LTM 1230-5.1 lifts up to 230 t, reaches a tip height of 111 m and drives at up to 80 km/h. In imperial units the lifting capacity is 253.5 US tons. The sheet notes: at 3 m radius, 12.7 m boom, 72 t counterweight. On the same row of their sheets, the Liebherr LTM 1250-5.1 shows 250 t and the Tadano ATF 220G-5 shows 220 t.

What are the Liebherr LTM 1230-5.1 dimensions?

The Liebherr LTM 1230-5.1 is 15.80 m (51 ft 10 in) long, 3.00 m (9 ft 10 in) wide and 3.95 m (13 ft) high. As it stands it is too big for the door of a standard shipping container. The Liebherr LTM 1250-5.1 is 15.96 m long, 3.00 m wide and 3.95 m high.

Liebherr LTM 1230-5.1 vs Liebherr LTM 1250-5.1: what is the difference?

The Liebherr LTM 1230-5.1 and the Liebherr LTM 1250-5.1 are both mobile cranes; this is where their sheets differ. The Liebherr LTM 1250-5.1 carries more fuel (750 L against 650 L). Both sets of figures are the makers’ own, for the builds on our sheets.

Liebherr LTM 1230-5.1 dimensions

Liebherr LTM 1230-5.1, side view with dimensions (illustration)3.95 m15.8 m
Side view
Liebherr LTM 1230-5.1, front view (illustration)3 m
Front view
Overall height
3.95 m
Overall length
15.8 m
Overall width
3 m

Illustration; figures from the maker's sheet.

How big is the Liebherr LTM 1230-5.1?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Liebherr LTM 1230-5.1 drawn to scale beside a person, a pickup truck and a 40 ft container. The Liebherr LTM 1230-5.1 is 15.8 m long - about 1.3 forty-foot containers - and 3.95 m tall, 2.3 times a person's height.Liebherr LTM 1230-5.115.8 × 3.95 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Liebherr LTM 1230-5.1 is 15.8 m long - about 1.3 forty-foot containers - and 3.95 m tall, 2.3 times a person's height.

Liebherr LTM 1230-5.1 load chart

What it lifts as the radius grows, from a published copy of the maker’s chart. Not for lift planning.

  1. 134 t3 m12.7 m boom
  2. 68.1 t10 m16.7 m boom
  3. 31.9 t20 m28.8 m boom
  4. 17.3 t30 m40.9 m boom

Every radius and boom length, 3 configurations, with a reader.

Full load chart

Liebherr LTM 1230-5.1 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 18 November 2026.

65 figures in 4 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall height3.95 m3.825 m with the chassis lowered by 125 mm; 4.0 m with 16.00 R 25 or 20.5 R 25 tyres (3.875 m lowered)[1] p.3
Overall width3 m3.1 m with 20.5 R 25 tyres[1] p.3
Track width2.61 m14.00 R 25 tyres; 2.55 m with 16.00 R 25, 2.57 m with 20.5 R 25[1] p.3
Height to top of counterweight3.7 m14.00 R 25 tyres; 3.75 m with larger tyres[1] p.3
Height of carrier frame at rear1.9 m14.00 R 25 tyres; 1.95 m with larger tyres; reading of dimension E on the drawing[1] p.3
Ground clearance (minimum)0.335 m14.00 R 25 tyres; 0.385 m with larger tyres[1] p.3
Angle of approach13°Smallest of the front angles on the drawing (G, 14.00 R 25 tyres; 15 deg with larger tyres); angle L is 15 deg (16 deg)[1] p.3
Overall length15.804 mWith the 72 t counterweight, 5.07 m behind the slewing centre (4.335 m with the basic 52 t counterweight)[1] p.3
Dimensions, part 2 of 2
FigureValue (metric)Source
Carrier length13.813 mFront bumper to rear of the carrier[1] p.3
Boom head to front of carrier1.766 m[1] p.3
Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / rear overhang2.498 / 2.75 / 1.65 / 2.45 / 1.7 / 2.765 m[1] p.3
Tail slewing radius5.73 mWith the 72 t counterweight; 4.83 m with the basic counterweight[1] p.3
Outrigger span, longitudinal9.315 m9.35 m on the opposite side of the carrier[1] p.3
Outrigger span, transverse (max)8.094 mRear outriggers; 7.395 m front; part-extended 7.394 / 6.1 / 5.384 m; 2.674-8.094 m with the optional VarioBase[1] p.3
Outrigger pad size600 x 600 mm[1] p.3
Angle of departure8°Smallest of the rear angles on the drawing (K, 14.00 R 25 tyres; 9 deg with larger tyres); angles I and H are 11 and 13 deg[1] p.3

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Gross vehicle weight60,000 kgOn-road driving, 12 t per axle, no counterweight carried[1] p.10
Gross vehicle weight, jobsite driving82,000 kgWith 22 t counterweight on board, 16.5 t per axle; 64 t with no counterweight[1] p.10
Axle load, on-road12,000 kgPer axle, maximum[1] p.10
Weight, part 2 of 2
FigureValue (metric)Source
Axle load, jobsite driving16,500 kgPer axle, maximum[1] p.10
Max outrigger reaction1,110 kNCrane superstructure on the outriggers; 768 kN (79 t) on the smaller support[1] p.8

Crane

Crane, part 1 of 2
FigureValue (metric)Source
Max lifting capacity230 tAt 3 m radius, 12.7 m boom, 72 t counterweight[1] p.16
Main boom length (m, fully extended)75 m[1] p.59
Main boom length retracted (m)12.7 m[1] p.59
Boom sections8 (1 base section + 7 telescopic sections, TELEMATIK rapid-cycle telescoping)[1] p.59
Max tip height111 mLargest hoist height of all boom and jib systems, from the cover of the sheet[1] p.1
Max radius86 mLargest radius of all boom and jib systems, from the cover of the sheet[1] p.1
Boom elevation angleUp to 83 deg[1] p.8
Boom elevation timeApprox. 55 s to 83 deg[1] p.8
Boom extension timeApprox. 680 s from 12.7 m to 75 m[1] p.8
Counterweight52 tBasic counterweight[1] p.59
Max counterweight72 t20 t additional counterweight (option); VarioBallast counterweight radius 4.83 m / 5.73 m[1] p.59
Swing-away jib K / NZK11.5-20 m double jib; 0 / 20 / 40 deg mechanical (K) or 0-40 deg hydraulic (NZK)[1] p.59
Fixed lattice jib NZF8-43 m, hydraulically adjustable 0-45 deg[1] p.59
Strong jib S4-39 m, 0 deg[1] p.59
Telescopic boom extension V3 x 7 m[1] p.59
Crane, part 2 of 2
FigureValue (metric)Source
Hoist 1 single-line speed0-134 m/min; 23 mm rope, 300 m, 105 kN pull[1] p.8
Hoist 2 single-line speed0-134 m/min; 23 mm rope, 280 m, 105 kN pull (second hoist is optional)[1] p.8
Slewing speed0-1.2 rpm, 360 deg[1] p.8
Hook block, 151 t1,900 kg9 sheaves, 16 lines[1] p.8
Hook block, 142.6 t1,700 kg7 sheaves, 14 lines[1] p.8
Hook block, 107.7 t1,600 kg5 sheaves, 11 lines[1] p.8
Hook block, 70.6 t1,500 kg3 sheaves, 7 lines; 1.0 t variant also listed[1] p.8
Hook block, 31.2 t840 kg1 sheave, 3 lines[1] p.8
Hook block, 10.5 t500 kg1 line[1] p.8
Crane driveMechanical drive of the crane hydraulics from the carrier engine; variable axial-piston pumps with servo control and power regulation[1] p.59
Hoist gearAxial-piston fixed motor, Liebherr drum with planetary gear, spring-loaded holding brake[1] p.59
Luffing gear1 differential cylinder with pilot-controlled brake valve[1] p.59
Slewing gearAxial-piston fixed motor, planetary gear, spring-loaded holding brake; triple-roller slewing ring[1] p.59
Crane cabSafety glazing, tilts back 20 deg[1] p.59
Crane controlLICCON2 safe load indicator, 2 self-centring joysticks, load-sensing control of 4 movements at once[1] p.59

Chassis

Chassis, part 1 of 2
FigureValue (metric)Source
Number of axles5, all axles steered; axles 2, 4 and 5 with planetary gears; optional 10x8 drive (axle 3 also driven)[1] p.59
Engine modelLiebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96; single engine also drives the crane[1] p.59
Gross power400 kW (544 hp)[1] p.59
Max torque2,516 Nm[1] p.59
Fuel tank650 L[1] p.59
TransmissionAutomated 12-speed with oil-cooled multi-disc clutch and intarder; two-stage distributor gear with lockable differential[1] p.59
Tyres385/95 R 25 (14.00 R 25), 10 tyres; 445/95 R 25 (16.00 R 25) or 525/80 R 25 (20.5 R 25) optional[1] p.59
Chassis, part 2 of 2
FigureValue (metric)Source
SuspensionHydropneumatic Niveaumatik on all axles, hydraulically lockable[1] p.59
BrakesDual-circuit all-wheel air service brake with discs on all axles, spring-loaded parking brake on axles 2-5, exhaust flap brake, intarder, Telma eddy-current brake optional[1] p.59
SteeringDual-circuit hydraulic power steering with active speed-dependent rear-axle steering and special steering programmes[1] p.59
Top speed80 km/h385/95 R 25 tyres; 85 kph with larger tyres[1] p.8
Minimum driving speed0.44 km/h (0.48 km/h with larger tyres)[1] p.8
Gradeability (max)Over 60 % theoretical (14.00 R 25); 56.5 % with larger tyres[1] p.8
Electrical system24 V DC, data-bus technique[1] p.59

Build: Liebherr LTM 1230-5.1, 5-axle 230 t all-terrain crane (Liebherr 6-cyl 400 kW carrier engine, 385/95 R 25 (14.00 R 25) tyres, 12.7-75 m telescopic boom, 52 t basic counterweight, 72 t maximum with VarioBallast) per Liebherr's multilingual technical data sheet. Letters A-F and L are those printed on the sheet's dimension drawing; M-O are assigned here.

  1. [1]Liebherr LTM 1230-5.1 technical data (Technische Daten / Technical Data, metric), Liebherr asset server

Liebherr LTM 1230-5.1 against its rivals

The mobile cranes nearest in weight from other makers, figure by figure, each shown at the same scale.

Liebherr LTM 1230-5.1, Liebherr LTM 1250-5.1, Tadano ATF 220G-5, Grove GMK5250L: specifications side by side
FigureLiebherr LTM 1230-5.1this pageLiebherr LTM 1250-5.1 specsTadano ATF 220G-5 specsGrove GMK5250L specs
Max torque2,516 Nm2,516 Nm2,400 Nm2,460 Nm
Fuel tank650 L750 L530 L650 L
Top speed80 km/h80 km/h85 km/h85 km/h
Overall height3.95 m3.95 m3.94 m3.95 m
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • The Liebherr LTM 1230-5.1 leads none of these figures, so the choice comes down to price, hours and dealer support.
  • Pick the Liebherr LTM 1250-5.1 if you need a bigger fuel tank (750 L).
  • Pick the Tadano ATF 220G-5 if you need a lower machine to move (3.94 m).

Liebherr LTM 1230-5.1 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

No Liebherr LTM 1230-5.1 is listed in the UAE on EquipmentsFinder right now. The prices below are for all mobile cranes, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 30

AED 2,225 /day

No priced Liebherr LTM 1230-5.1 for hire yet: this is all mobile cranes

Low AED 1,000High AED 8,000

No Liebherr LTM 1230-5.1 for rent listed right now.

Request a Liebherr LTM 1230-5.1

Who is asking for mobile cranes in the UAE

Contractors posted 72 requests for mobile cranes on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (33), Abu Dhabi (21) and Sharjah (7). Requests name a kind of machine, not a model, so this counts every mobile crane, the Liebherr LTM 1230-5.1 among them.

Requests, last 12 months
72
For Dubai
33
For Abu Dhabi
21
  • Crawler Cranes Required For RentDubai / 20 November 2026
  • Hiab Crane/Truck Crane 10 Ton or Above Required For RentDubai / 19 November 2026
  • 160 TON Crane Required For PurchaseAbu Dhabi / 18 November 2026

Open mobile crane requests on the Inquiry BoardPost a request for a Liebherr LTM 1230-5.1

Tools for a Liebherr LTM 1230-5.1

For the people who run one: codes, charts and calculators that fit a mobile crane.

Ranked: Mobile cranes by lifting capacity

By maximum lifting capacity, largest first. The Liebherr LTM 1230-5.1 is 9 of 25; every figure is the maker's.

  1. 5Grove GMK6300L-1300 t
  2. 6Liebherr LTM 1300-6.2300 t
  3. 7Grove GMK5250L250 t
  4. 8Liebherr LTM 1250-5.1250 t
  5. 9Liebherr LTM 1230-5.1This page230 t
  6. 10Tadano ATF 220G-5220 t
  7. 11Liebherr LTM 1160-5.2180 t
  8. 12SANY STC1600T7160 t
  9. 13Liebherr LTM 1100-4.2100 t

Showing 5 to 13 of 25, the machines nearest the Liebherr LTM 1230-5.1 by maximum lifting capacity.

Popular Liebherr mobile crane models

More Liebherr LTM 1230-5.1 questions

How much does a Liebherr LTM 1230-5.1 weigh?

60 tonnes: 60,000 kg (132,277 lb).

How long is the Liebherr LTM 1230-5.1's boom?

The main boom extends to 75 m (246.1 ft).

How high can a Liebherr LTM 1230-5.1 lift?

Its maximum tip height is 111 m (364.2 ft).

How heavy is the counterweight on a Liebherr LTM 1230-5.1?

52 t (57.3 US tons), basic counterweight.

How many axles does a Liebherr LTM 1230-5.1 have?

5, all axles steered; axles 2, 4 and 5 with planetary gears; optional 10x8 drive (axle 3 also driven).

What is the outrigger spread of a Liebherr LTM 1230-5.1?

8.094 m (26.6 ft) across.

How tall is a Liebherr LTM 1230-5.1?

3.95 m (13 ft) overall.

What is the tail swing radius of a Liebherr LTM 1230-5.1?

5.73 m (18.8 ft).

How wide is a Liebherr LTM 1230-5.1?

3.00 m (9 ft 10 in) overall.

What are the Liebherr LTM 1230-5.1's main competitors?

The machines nearest it in size are the XCMG QY100K5C, the Liebherr LTM 1500-8.1 and the Liebherr LTM 1100-4.2. Each has a side-by-side comparison on EquipmentsFinder.

Is the Liebherr LTM 1230-5.1 sold in the UAE?

Yes. The Liebherr LTM 1230-5.1 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Liebherr LTM 1230-5.1 used for?

A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far. Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.

Embed this spec card

The Liebherr LTM 1230-5.1's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/liebherr-ltm1230" title="Liebherr LTM 1230-5.1 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/liebherr-ltm1230">Liebherr LTM 1230-5.1 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Liebherr LTM 1230-5.1 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.