Liebherr LTM 1230-5.1
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Liebherr · mobile crane

Liebherr LTM 1230-5.1

Liebherr LTM 1230-5.1, 5-axle 230 t all-terrain crane (Liebherr 6-cyl 400 kW carrier engine, 385/95 R 25 (14.00 R 25) tyres, 12.7-75 m telescopic boom, 52 t basic counterweight, 72 t maximum with VarioBallast) per Liebherr's multilingual technical data sheet. Letters A-F and L are those printed on the sheet's dimension drawing; M-O are assigned here.

UAEGlobal

lifting capacity
230 t
Main boom length (m, fully extended)
75 m
tip height
111 m
power
400 kW (544 hp)
Liebherr LTM 1230-5.1, side view with dimensions (illustration)3.95 m15.8 m
Liebherr LTM 1230-5.1, front view (illustration)3 m

Dimensions

Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / rear overhang
2.498 / 2.75 / 1.65 / 2.45 / 1.7 / 2.765 m
Tail slewing radius (With the 72 t counterweight; 4.83 m with the basic counterweight)
5.73 m
Outrigger span, longitudinal (9.35 m on the opposite side of the carrier)
9.315 m
Outrigger span, transverse (max) (Rear outriggers; 7.395 m front; part-extended 7.394 / 6.1 / 5.384 m; 2.674-8.094 m with the optional VarioBase)
8.094 m
Outrigger pad size
600 x 600 mm
Angle of departure (Smallest of the rear angles on the drawing (K, 14.00 R 25 tyres; 9 deg with larger tyres); angles I and H are 11 and 13 deg)
8°

Weight

Gross vehicle weight (On-road driving, 12 t per axle, no counterweight carried)
60,000 kg
Gross vehicle weight, jobsite driving (With 22 t counterweight on board, 16.5 t per axle; 64 t with no counterweight)
82,000 kg
Axle load, on-road (Per axle, maximum)
12,000 kg
Axle load, jobsite driving (Per axle, maximum)
16,500 kg
Max outrigger reaction (Crane superstructure on the outriggers; 768 kN (79 t) on the smaller support)
1,110 kN

Crane

Max lifting capacity (At 3 m radius, 12.7 m boom, 72 t counterweight)
230 t
Main boom length (m, fully extended)
75 m
Main boom length retracted (m)
12.7 m
Boom sections
8 (1 base section + 7 telescopic sections, TELEMATIK rapid-cycle telescoping)
Max tip height (Largest hoist height of all boom and jib systems, from the cover of the sheet)
111 m
Max radius (Largest radius of all boom and jib systems, from the cover of the sheet)
86 m
Boom elevation angle
Up to 83 deg
Boom elevation time
Approx. 55 s to 83 deg
Boom extension time
Approx. 680 s from 12.7 m to 75 m
Counterweight (Basic counterweight)
52 t
Max counterweight (20 t additional counterweight (option); VarioBallast counterweight radius 4.83 m / 5.73 m)
72 t
Swing-away jib K / NZK
11.5-20 m double jib; 0 / 20 / 40 deg mechanical (K) or 0-40 deg hydraulic (NZK)
Fixed lattice jib NZF
8-43 m, hydraulically adjustable 0-45 deg
Strong jib S
4-39 m, 0 deg
Telescopic boom extension V
3 x 7 m
Hoist 1 single-line speed
0-134 m/min; 23 mm rope, 300 m, 105 kN pull
Hoist 2 single-line speed
0-134 m/min; 23 mm rope, 280 m, 105 kN pull (second hoist is optional)
Slewing speed
0-1.2 rpm, 360 deg
Hook block, 151 t (9 sheaves, 16 lines)
1,900 kg
Hook block, 142.6 t (7 sheaves, 14 lines)
1,700 kg
Hook block, 107.7 t (5 sheaves, 11 lines)
1,600 kg
Hook block, 70.6 t (3 sheaves, 7 lines; 1.0 t variant also listed)
1,500 kg
Hook block, 31.2 t (1 sheave, 3 lines)
840 kg
Hook block, 10.5 t (1 line)
500 kg
Crane drive
Mechanical drive of the crane hydraulics from the carrier engine; variable axial-piston pumps with servo control and power regulation
Hoist gear
Axial-piston fixed motor, Liebherr drum with planetary gear, spring-loaded holding brake
Luffing gear
1 differential cylinder with pilot-controlled brake valve
Slewing gear
Axial-piston fixed motor, planetary gear, spring-loaded holding brake; triple-roller slewing ring
Crane cab
Safety glazing, tilts back 20 deg
Crane control
LICCON2 safe load indicator, 2 self-centring joysticks, load-sensing control of 4 movements at once

Chassis

Number of axles
5, all axles steered; axles 2, 4 and 5 with planetary gears; optional 10x8 drive (axle 3 also driven)
Engine model
Liebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96; single engine also drives the crane
Gross power
400 kW (544 hp)
Max torque
2,516 Nm
Fuel tank
650 L
Transmission
Automated 12-speed with oil-cooled multi-disc clutch and intarder; two-stage distributor gear with lockable differential
Tyres
385/95 R 25 (14.00 R 25), 10 tyres; 445/95 R 25 (16.00 R 25) or 525/80 R 25 (20.5 R 25) optional
Suspension
Hydropneumatic Niveaumatik on all axles, hydraulically lockable
Brakes
Dual-circuit all-wheel air service brake with discs on all axles, spring-loaded parking brake on axles 2-5, exhaust flap brake, intarder, Telma eddy-current brake optional
Steering
Dual-circuit hydraulic power steering with active speed-dependent rear-axle steering and special steering programmes
Top speed (385/95 R 25 tyres; 85 kph with larger tyres)
80 km/h
Minimum driving speed
0.44 km/h (0.48 km/h with larger tyres)
Gradeability (max)
Over 60 % theoretical (14.00 R 25); 56.5 % with larger tyres
Electrical system
24 V DC, data-bus technique