Specification sheetIssued 20 November 2026
Liebherr · mobile crane
Liebherr LTM 1230-5.1
Liebherr LTM 1230-5.1, 5-axle 230 t all-terrain crane (Liebherr 6-cyl 400 kW carrier engine, 385/95 R 25 (14.00 R 25) tyres, 12.7-75 m telescopic boom, 52 t basic counterweight, 72 t maximum with VarioBallast) per Liebherr's multilingual technical data sheet. Letters A-F and L are those printed on the sheet's dimension drawing; M-O are assigned here.
UAEGlobal
- lifting capacity
- 253.5 US tons
- Main boom length (m, fully extended)
- 246.1 ft
- tip height
- 364.2 ft
- power
- 544 hp
13 ft51.9 ft
9.8 ftDimensions
- Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / rear overhang
- 2.498 / 2.75 / 1.65 / 2.45 / 1.7 / 2.765 m
- Tail slewing radius (With the 72 t counterweight; 4.83 m with the basic counterweight)
- 18.8 ft
- Outrigger span, longitudinal (9.35 m on the opposite side of the carrier)
- 30.6 ft
- Outrigger span, transverse (max) (Rear outriggers; 7.395 m front; part-extended 7.394 / 6.1 / 5.384 m; 2.674-8.094 m with the optional VarioBase)
- 26.6 ft
- Outrigger pad size
- 600 x 600 mm
- Angle of departure (Smallest of the rear angles on the drawing (K, 14.00 R 25 tyres; 9 deg with larger tyres); angles I and H are 11 and 13 deg)
- 8°
Weight
- Gross vehicle weight (On-road driving, 12 t per axle, no counterweight carried)
- 132,277 lb
- Gross vehicle weight, jobsite driving (With 22 t counterweight on board, 16.5 t per axle; 64 t with no counterweight)
- 180,779 lb
- Axle load, on-road (Per axle, maximum)
- 26,455 lb
- Axle load, jobsite driving (Per axle, maximum)
- 36,376 lb
- Max outrigger reaction (Crane superstructure on the outriggers; 768 kN (79 t) on the smaller support)
- 249,538 lbf
Crane
- Max lifting capacity (At 3 m radius, 12.7 m boom, 72 t counterweight)
- 253.5 US tons
- Main boom length (m, fully extended)
- 246.1 ft
- Main boom length retracted (m)
- 41.7 ft
- Boom sections
- 8 (1 base section + 7 telescopic sections, TELEMATIK rapid-cycle telescoping)
- Max tip height (Largest hoist height of all boom and jib systems, from the cover of the sheet)
- 364.2 ft
- Max radius (Largest radius of all boom and jib systems, from the cover of the sheet)
- 282.2 ft
- Boom elevation angle
- Up to 83 deg
- Boom elevation time
- Approx. 55 s to 83 deg
- Boom extension time
- Approx. 680 s from 12.7 m to 75 m
- Counterweight (Basic counterweight)
- 57.3 US tons
- Max counterweight (20 t additional counterweight (option); VarioBallast counterweight radius 4.83 m / 5.73 m)
- 79.4 US tons
- Swing-away jib K / NZK
- 11.5-20 m double jib; 0 / 20 / 40 deg mechanical (K) or 0-40 deg hydraulic (NZK)
- Fixed lattice jib NZF
- 8-43 m, hydraulically adjustable 0-45 deg
- Strong jib S
- 4-39 m, 0 deg
- Telescopic boom extension V
- 3 x 7 m
- Hoist 1 single-line speed
- 0-134 m/min; 23 mm rope, 300 m, 105 kN pull
- Hoist 2 single-line speed
- 0-134 m/min; 23 mm rope, 280 m, 105 kN pull (second hoist is optional)
- Slewing speed
- 0-1.2 rpm, 360 deg
- Hook block, 151 t (9 sheaves, 16 lines)
- 4,189 lb
- Hook block, 142.6 t (7 sheaves, 14 lines)
- 3,748 lb
- Hook block, 107.7 t (5 sheaves, 11 lines)
- 3,527 lb
- Hook block, 70.6 t (3 sheaves, 7 lines; 1.0 t variant also listed)
- 3,307 lb
- Hook block, 31.2 t (1 sheave, 3 lines)
- 1,852 lb
- Hook block, 10.5 t (1 line)
- 1,102 lb
- Crane drive
- Mechanical drive of the crane hydraulics from the carrier engine; variable axial-piston pumps with servo control and power regulation
- Hoist gear
- Axial-piston fixed motor, Liebherr drum with planetary gear, spring-loaded holding brake
- Luffing gear
- 1 differential cylinder with pilot-controlled brake valve
- Slewing gear
- Axial-piston fixed motor, planetary gear, spring-loaded holding brake; triple-roller slewing ring
- Crane cab
- Safety glazing, tilts back 20 deg
- Crane control
- LICCON2 safe load indicator, 2 self-centring joysticks, load-sensing control of 4 movements at once
Chassis
- Number of axles
- 5, all axles steered; axles 2, 4 and 5 with planetary gears; optional 10x8 drive (axle 3 also driven)
- Engine model
- Liebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96; single engine also drives the crane
- Gross power
- 544 hp
- Max torque
- 1,856 lbf·ft
- Fuel tank
- 171.7 US gal
- Transmission
- Automated 12-speed with oil-cooled multi-disc clutch and intarder; two-stage distributor gear with lockable differential
- Tyres
- 385/95 R 25 (14.00 R 25), 10 tyres; 445/95 R 25 (16.00 R 25) or 525/80 R 25 (20.5 R 25) optional
- Suspension
- Hydropneumatic Niveaumatik on all axles, hydraulically lockable
- Brakes
- Dual-circuit all-wheel air service brake with discs on all axles, spring-loaded parking brake on axles 2-5, exhaust flap brake, intarder, Telma eddy-current brake optional
- Steering
- Dual-circuit hydraulic power steering with active speed-dependent rear-axle steering and special steering programmes
- Top speed (385/95 R 25 tyres; 85 kph with larger tyres)
- 49.7 mph
- Minimum driving speed
- 0.44 km/h (0.48 km/h with larger tyres)
- Gradeability (max)
- Over 60 % theoretical (14.00 R 25); 56.5 % with larger tyres
- Electrical system
- 24 V DC, data-bus technique