EF Logo

mobile cranemade by LiebherrUAE, Global

Liebherr LTM 1160-5.2Specs and dimensions

Max lifting capacity
180 t
198.4 US tons
Main boom, extended
62 m
203 ft 5 in
Engine
Liebherr 6-cyl diesel

Quick answer

The Liebherr LTM 1160-5.2 is a mobile crane with a Liebherr 6-cyl diesel engine rated at 400 kW (544 hp). It lifts up to 180 t, reaches a tip height of 99 m and drives at up to 80 km/h. It suits lifting steel, precast and plant on building sites. Its rivals include the Liebherr LTM 1100-4.2 (100 t) and the SANY STC1600T7 (160 t).

Liebherr LTM 1160-5.2 (illustration)

What engine is in the Liebherr LTM 1160-5.2?

The Liebherr LTM 1160-5.2 is offered with Liebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96; single engine also drives the crane. The sheet's power figure is 400 kW (544 hp) gross (Rating basis and rpm not stated). It makes 2,516 Nm (1,856 lbf-ft) of torque. The fuel tank holds 750 L (198 gal).

How much can a Liebherr LTM 1160-5.2 lift?

The Liebherr LTM 1160-5.2 lifts up to 180 t, reaches a tip height of 99 m and drives at up to 80 km/h. In imperial units the lifting capacity is 198.4 US tons. The sheet notes: at 2.5 m radius. On the same row of their sheets, the Liebherr LTM 1100-4.2 shows 100 t and the SANY STC1600T7 shows 160 t.

What are the Liebherr LTM 1160-5.2 dimensions?

The Liebherr LTM 1160-5.2 is 15.66 m (51 ft 4 in) long, 2.75 m (9 ft) wide and 3.95 m (13 ft) high. As it stands it is too big for the door of a standard shipping container. The Liebherr LTM 1100-4.2 is 13.50 m long, 2.75 m wide and 3.95 m high.

Liebherr LTM 1160-5.2 vs Liebherr LTM 1100-4.2: what is the difference?

The Liebherr LTM 1160-5.2 and the Liebherr LTM 1100-4.2 are both mobile cranes; this is where their sheets differ. The Liebherr LTM 1160-5.2 has more gross power (400 kW against 350 kW), has more torque (2,516 Nm against 2,230 Nm) and carries more fuel (750 L against 400 L). Both sets of figures are the makers’ own, for the builds on our sheets.

Liebherr LTM 1160-5.2 dimensions

Liebherr LTM 1160-5.2, side view with dimensions (illustration)3.95 m15.7 m
Side view
Liebherr LTM 1160-5.2, front view (illustration)2.75 m
Front view
Overall height
3.95 m
Overall length
15.7 m
Overall width
2.75 m

Illustration; figures from the maker's sheet.

How big is the Liebherr LTM 1160-5.2?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Liebherr LTM 1160-5.2 drawn to scale beside a person, a pickup truck and a 40 ft container. The Liebherr LTM 1160-5.2 is 15.66 m long - about 1.3 forty-foot containers - and 3.95 m tall, 2.3 times a person's height.Liebherr LTM 1160-5.215.66 × 3.95 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Liebherr LTM 1160-5.2 is 15.66 m long - about 1.3 forty-foot containers - and 3.95 m tall, 2.3 times a person's height.

Liebherr LTM 1160-5.2 load chart

What it lifts as the radius grows, from a published copy of the maker’s chart. Not for lift planning.

  1. 86 t3 m13.1 m boom
  2. 56.4 t10 m22.1 m boom
  3. 23.6 t20 m26.6 m boom
  4. 13 t30 m35.5 m boom

Every radius and boom length, 4 configurations, with a reader.

Full load chart

Liebherr LTM 1160-5.2 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

49 figures in 4 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall height3.95 m14.00 R 25 tyres; 4.0 m with 16.00 / 20.5 R 25 tyres, 3.85 m with the suspension lowered by 100 mm[1] p.4
Overall width2.75 m14.00 R 25 and 16.00 R 25 tyres; 2.85 m with 20.5 R 25[1] p.4
Track width2.36 m14.00 R 25 tyres; 2.30 m (16.00 R 25) and 2.32 m (20.5 R 25)[1] p.4
Height to top of superstructure3.708 m14.00 R 25 tyres; 3.758 m with larger tyres[1] p.4
Height to underside of counterweight1.996 m14.00 R 25 tyres; 2.046 m with larger tyres[1] p.4
Ground clearance (minimum)0.378 m14.00 R 25 tyres; 0.428 m with larger tyres[1] p.4
Overall length15.659 mBoom head to rear of carrier[1] p.4
Carrier length13.688 mFront bumper to rear of carrier[1] p.4
Dimensions, part 2 of 2
FigureValue (metric)Source
Boom head to front of carrier1.971 m[1] p.4
Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / rear overhang2.496 / 2.65 / 1.65 / 2.45 / 1.65 / 2.792 m[1] p.4
Tail slewing radius5.23 mLargest tail radius on the drawing; the drawing also shows 4.73 m (VarioBallast brochure page)[1] p.4
Outrigger span, longitudinal9.204 m[1] p.4
Outrigger span, transverse (max)8.314 mFront beams; 8.306 m at the rear beams, with intermediate positions from 2.454 m[1] p.4
Approach angle16°Angle H on the drawing, 14.00 R 25 tyres; 18 deg with larger tyres[1] p.4
Angle of departure9°Smallest of the rear angles on the drawing (G, 14.00 R 25 tyres; 10 deg with larger tyres); angle F is 14 deg (16 deg)[1] p.4

Weight

Weight
FigureValue (metric)Source
Gross vehicle weight60,000 kgRoad travel, 12 t per axle, with no counterweight or with 3.5 t (UK ballast)[1] p.10
Gross vehicle weight, jobsite driving82,000 kgUp to 16.5 t per axle with 22.5 t of counterweight (UK ballast configuration)[1] p.10
Max outrigger reaction1,052 kNSecond outrigger configuration shown on the sheet; 748 kN (76.3 t) for the first[1] p.11

Crane

Crane, part 1 of 2
FigureValue (metric)Source
Max lifting capacity180 tAt 2.5 m radius[2]
Main boom length (m, fully extended)62 m[1] p.34
Main boom length retracted (m)13.1 m[1] p.34
Boom sections6 (1 base section + 5 telescopic sections, TELEMATIK rapid-cycle telescoping)[1] p.34
Max tip height99 mMaximum hoist height quoted on the data sheet cover[1] p.2
Max radius78 mMaximum radius quoted on the data sheet cover[1] p.2
Counterweight34 tBasic counterweight; 20 t additional for 54 t total[1] p.34
Max counterweight54 t[1] p.34
Swing-away jib K / NZKSingle 10.8 m or double 10.8-19 m; 0 / 20 / 40 deg mechanical, or 0-40 deg hydraulically adjustable (NZK); 2.9 m assembly jib[1] p.34
Crane, part 2 of 2
FigureValue (metric)Source
Lattice jib length2.9 m to 40 m[2]
Telescopic boom extension V3 x 7 m[1] p.34
Boom elevation timeApprox. 65 s to 82 deg[1] p.11
Boom extension timeApprox. 450 s from 13.1 m to 62 m[1] p.11
Hoist single-line speed0-124 m/min per hoist; 21 mm rope, 295 m, 91.6 kN pull (2nd hoist optional)[1] p.11
Slewing speed0-1.4 rpm, 360 deg[1] p.11
Hook block, 146 t1,320 kg9 sheaves, 18 lines; 86 t block 1,300 / 900 kg (5 / 10), 61.6 t 700 kg (3 / 7), 27.2 t 650 kg (1 / 3), 9.2 t 350 kg (1 line)[1] p.11
Boom elevation angleUp to 82 degLuffing time is given as approx. 65 s to reach 82 deg[1] p.11

Chassis

Chassis, part 1 of 2
FigureValue (metric)Source
Number of axles5, all axles steered; drive 10x6x10, 10x8x10 optional[1] p.34
Engine modelLiebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96; single engine also drives the crane[1] p.34
Gross power400 kW (544 hp)Rating basis and rpm not stated[1] p.6
Max torque2,516 Nm[1] p.34
Fuel tank750 L[1] p.34
TransmissionZF TraXon automated 12-speed (12 forward / 2 reverse) with oil-cooled multi-disc clutch and intarder; two-stage transfer case with locking differential[1] p.34
Tyres385/95 R 25 (14.00 R 25); 445/95 R 25 and 525/80 R 25 optional[1] p.34
Chassis, part 2 of 2
FigureValue (metric)Source
SuspensionHydropneumatic "Niveaumatik", hydraulically lockable, all axles[1] p.34
BrakesDual-circuit air brake with discs on all axles, exhaust flap brake, intarder, Telma eddy-current brake optional[1] p.34
Top speed80 km/h14.00 R 25 tyres; 85 km/h with 16.00 R 25 or 20.5 R 25[1] p.11
Minimum driving speed0.46 km/h (0.5 km/h with larger tyres)[1] p.11
Gradeability (max)Over 60 % theoretical (14.00 R 25); 55.7 % with larger tyres[1] p.11
SteeringDual-circuit hydraulic power steering; active speed-dependent rear-axle steering with special steering programmes[1] p.34
Electrical system24 V DC, data-bus technology[1] p.34

Build: Liebherr LTM 1160-5.2, 5-axle 180 t all-terrain crane (6-cyl Liebherr carrier engine 400 kW, 385/95 R 25 (14.00 R 25) tyres, 13.1-62 m telescopic boom, 34 t basic and 54 t maximum counterweight) per the current Liebherr technical data pages, dealer-hosted excerpt of the lifting chart; an older edition of the same sheet shows slightly different working speeds.

  1. [1]Liebherr LTM 1160-5.2 technical data (Technische Daten / Technical Data), Nordic Crane-hosted excerpt of the Liebherr lifting chart
  2. [2]Liebherr LTM 1160-5.2 product page (Liebherr International)
  3. [3]Liebherr LTM 1160-5.2 technical data, earlier edition (Stage IV / Tier 4 final), hellopro-hosted

Liebherr LTM 1160-5.2 against its rivals

The mobile cranes nearest in weight from other makers, figure by figure, each shown at the same scale.

Liebherr LTM 1160-5.2, Liebherr LTM 1100-4.2, SANY STC1600T7, Tadano ATF 220G-5: specifications side by side
FigureLiebherr LTM 1160-5.2this pageLiebherr LTM 1100-4.2 specsSANY STC1600T7 specsTadano ATF 220G-5 specs
Gross power400 kW (544 hp)350 kW (476 hp)316 kW (424 hp)not on its sheet
Max torque2,516 Nm2,230 Nm2,060 Nm2,400 Nm
Fuel tank750 L400 L450 L530 L
Top speed80 km/h75 km/h85 km/h85 km/h
Overall width2.75 m2.75 m3 m3 m
Overall height3.95 m3.95 m3.995 m3.94 m
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Liebherr LTM 1160-5.2 if you need more gross power (400 kW), more torque (2,516 Nm) and a bigger fuel tank (750 L).
  • Pick the Tadano ATF 220G-5 if you need a lower machine to move (3.94 m).

Liebherr LTM 1160-5.2 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

Liebherr LTM 1160-5.2 on EquipmentsFinder in the UAE now: 4 listed for rent, none for sale. Too few carry a price to give a Liebherr LTM 1160-5.2 range, so the figure below is for all mobile cranes.

Who is asking for mobile cranes in the UAE

Contractors posted 72 requests for mobile cranes on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (33), Abu Dhabi (21) and Sharjah (7). Requests name a kind of machine, not a model, so this counts every mobile crane, the Liebherr LTM 1160-5.2 among them.

Requests, last 12 months
72
For Dubai
33
For Abu Dhabi
21
  • Crawler Cranes Required For RentDubai / 20 November 2026
  • Hiab Crane/Truck Crane 10 Ton or Above Required For RentDubai / 19 November 2026
  • 160 TON Crane Required For PurchaseAbu Dhabi / 18 November 2026

Open mobile crane requests on the Inquiry BoardPost a request for a Liebherr LTM 1160-5.2

Tools for a Liebherr LTM 1160-5.2

For the people who run one: codes, charts and calculators that fit a mobile crane.

Ranked: Mobile cranes by lifting capacity

By maximum lifting capacity, largest first. The Liebherr LTM 1160-5.2 is 11 of 25; every figure is the maker's.

  1. 7Grove GMK5250L250 t
  2. 8Liebherr LTM 1250-5.1250 t
  3. 9Liebherr LTM 1230-5.1230 t
  4. 10Tadano ATF 220G-5220 t
  5. 11Liebherr LTM 1160-5.2This page180 t
  6. 12SANY STC1600T7160 t
  7. 13Liebherr LTM 1100-4.2100 t
  8. 14SANY STC1000T6100 t
  9. 15XCMG QY100K5C100 t

Showing 7 to 15 of 25, the machines nearest the Liebherr LTM 1160-5.2 by maximum lifting capacity.

Popular Liebherr mobile crane models

More Liebherr LTM 1160-5.2 questions

How much does a Liebherr LTM 1160-5.2 weigh?

60 tonnes: 60,000 kg (132,277 lb).

How long is the Liebherr LTM 1160-5.2's boom?

The main boom extends to 62 m (203 ft 5 in).

How high can a Liebherr LTM 1160-5.2 lift?

Its maximum tip height is 99 m (324 ft 10 in).

How heavy is the counterweight on a Liebherr LTM 1160-5.2?

34 t (37.5 US tons).

How many axles does a Liebherr LTM 1160-5.2 have?

5, all axles steered; drive 10x6x10, 10x8x10 optional.

What is the outrigger spread of a Liebherr LTM 1160-5.2?

8.314 m (27 ft 3 in) across.

How tall is a Liebherr LTM 1160-5.2?

3.95 m (13 ft) overall.

What is the tail swing radius of a Liebherr LTM 1160-5.2?

5.23 m (17 ft 2 in).

How wide is a Liebherr LTM 1160-5.2?

2.75 m (9 ft) overall.

What are the Liebherr LTM 1160-5.2's main competitors?

The machines nearest it in size are the XCMG QY100K5C, the Liebherr LTM 1500-8.1 and the Liebherr LTM 1100-4.2. Each has a side-by-side comparison on EquipmentsFinder.

Is the Liebherr LTM 1160-5.2 sold in the UAE?

Yes. The Liebherr LTM 1160-5.2 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Liebherr LTM 1160-5.2 used for?

A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far. Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.

Embed this spec card

The Liebherr LTM 1160-5.2's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/liebherr-ltm1160" title="Liebherr LTM 1160-5.2 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/liebherr-ltm1160">Liebherr LTM 1160-5.2 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Liebherr LTM 1160-5.2 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.