Liebherr LTM 1160-5.2
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Liebherr · mobile crane

Liebherr LTM 1160-5.2

Liebherr LTM 1160-5.2, 5-axle 180 t all-terrain crane (6-cyl Liebherr carrier engine 400 kW, 385/95 R 25 (14.00 R 25) tyres, 13.1-62 m telescopic boom, 34 t basic and 54 t maximum counterweight) per the current Liebherr technical data pages, dealer-hosted excerpt of the lifting chart; an older edition of the same sheet shows slightly different working speeds.

UAEGlobal

lifting capacity
180 t
Main boom length (m, fully extended)
62 m
tip height
99 m
power
400 kW (544 hp)
Liebherr LTM 1160-5.2, side view with dimensions (illustration)3.95 m15.7 m
Liebherr LTM 1160-5.2, front view (illustration)2.75 m

Dimensions

Boom head to front of carrier
1.971 m
Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / rear overhang
2.496 / 2.65 / 1.65 / 2.45 / 1.65 / 2.792 m
Tail slewing radius (Largest tail radius on the drawing; the drawing also shows 4.73 m (VarioBallast brochure page))
5.23 m
Outrigger span, longitudinal
9.204 m
Outrigger span, transverse (max) (Front beams; 8.306 m at the rear beams, with intermediate positions from 2.454 m)
8.314 m
Approach angle (Angle H on the drawing, 14.00 R 25 tyres; 18 deg with larger tyres)
16°
Angle of departure (Smallest of the rear angles on the drawing (G, 14.00 R 25 tyres; 10 deg with larger tyres); angle F is 14 deg (16 deg))
9°

Weight

Gross vehicle weight (Road travel, 12 t per axle, with no counterweight or with 3.5 t (UK ballast))
60,000 kg
Gross vehicle weight, jobsite driving (Up to 16.5 t per axle with 22.5 t of counterweight (UK ballast configuration))
82,000 kg
Max outrigger reaction (Second outrigger configuration shown on the sheet; 748 kN (76.3 t) for the first)
1,052 kN

Crane

Max lifting capacity (At 2.5 m radius)
180 t
Main boom length (m, fully extended)
62 m
Main boom length retracted (m)
13.1 m
Boom sections
6 (1 base section + 5 telescopic sections, TELEMATIK rapid-cycle telescoping)
Max tip height (Maximum hoist height quoted on the data sheet cover)
99 m
Max radius (Maximum radius quoted on the data sheet cover)
78 m
Counterweight (Basic counterweight; 20 t additional for 54 t total)
34 t
Max counterweight
54 t
Swing-away jib K / NZK
Single 10.8 m or double 10.8-19 m; 0 / 20 / 40 deg mechanical, or 0-40 deg hydraulically adjustable (NZK); 2.9 m assembly jib
Lattice jib length
2.9 m to 40 m
Telescopic boom extension V
3 x 7 m
Boom elevation time
Approx. 65 s to 82 deg
Boom extension time
Approx. 450 s from 13.1 m to 62 m
Hoist single-line speed
0-124 m/min per hoist; 21 mm rope, 295 m, 91.6 kN pull (2nd hoist optional)
Slewing speed
0-1.4 rpm, 360 deg
Hook block, 146 t (9 sheaves, 18 lines; 86 t block 1,300 / 900 kg (5 / 10), 61.6 t 700 kg (3 / 7), 27.2 t 650 kg (1 / 3), 9.2 t 350 kg (1 line))
1,320 kg
Boom elevation angle (Luffing time is given as approx. 65 s to reach 82 deg)
Up to 82 deg

Chassis

Number of axles
5, all axles steered; drive 10x6x10, 10x8x10 optional
Engine model
Liebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96; single engine also drives the crane
Gross power (Rating basis and rpm not stated)
400 kW (544 hp)
Max torque
2,516 Nm
Fuel tank
750 L
Transmission
ZF TraXon automated 12-speed (12 forward / 2 reverse) with oil-cooled multi-disc clutch and intarder; two-stage transfer case with locking differential
Tyres
385/95 R 25 (14.00 R 25); 445/95 R 25 and 525/80 R 25 optional
Suspension
Hydropneumatic "Niveaumatik", hydraulically lockable, all axles
Brakes
Dual-circuit air brake with discs on all axles, exhaust flap brake, intarder, Telma eddy-current brake optional
Top speed (14.00 R 25 tyres; 85 km/h with 16.00 R 25 or 20.5 R 25)
80 km/h
Minimum driving speed
0.46 km/h (0.5 km/h with larger tyres)
Gradeability (max)
Over 60 % theoretical (14.00 R 25); 55.7 % with larger tyres
Steering
Dual-circuit hydraulic power steering; active speed-dependent rear-axle steering with special steering programmes
Electrical system
24 V DC, data-bus technology