EF Logo

mobile cranemade by SANYUAE, Global

SANY STC1000T6Specs and dimensions

Max lifting capacity
100 t
220,462 lb
Main boom, extended
60 m
196 ft 10 in
Engine
DF Cummins ISLe375 30

Quick answer

The SANY STC1000T6 is a mobile crane with a DF Cummins ISLe375 30 engine rated at 275 kW (369 hp). It lifts up to 100 t, reaches a tip height of 60.5 m and drives at up to 80 km/h. It suits lifting steel, precast and plant on building sites. Its rivals include the XCMG QY100K5C (100 t) and the Liebherr LTM 1100-4.2 (100 t).

SANY STC1000T6 (illustration)

What engine is in the SANY STC1000T6?

The SANY STC1000T6 has a DF Cummins ISLe375 30 engine rated at 275 kW (369 hp) gross, at 2,100 rpm. It makes 1,550 Nm (1,143 lbf·ft) of torque. The fuel tank holds 450 L (119 US gal). The figures are from SANY STC1000T6 truck crane specification V2.6, SANY Panama copy.

Cummins fault codes

How much can a SANY STC1000T6 lift?

The SANY STC1000T6 lifts up to 100 t, reaches a tip height of 60.5 m and drives at up to 80 km/h. In imperial units the lifting capacity is 220,462 lb. The sheet notes: at 2.5 m radius (minimum rated radius), 12.9 m boom. On the same row of their sheets, the XCMG QY100K5C shows 100 t and the Liebherr LTM 1100-4.2 shows 100 t.

What are the SANY STC1000T6 dimensions?

The SANY STC1000T6 is 14.99 m (49 ft 2 in) long, 2.80 m (9 ft 2 in) wide and 3.95 m (13 ft) high. As it stands it is too big for the door of a standard shipping container. The XCMG QY100K5C is 14.98 m long, 2.80 m wide and 3.89 m high.

SANY STC1000T6 vs XCMG QY100K5C: what is the difference?

The SANY STC1000T6 and the XCMG QY100K5C are both mobile cranes; this is where their sheets differ. The XCMG QY100K5C has more gross power (294 kW against 275 kW), has more torque (1,900 Nm against 1,550 Nm) and carries more fuel (470 L against 450 L). Both sets of figures are the makers’ own, for the builds on our sheets.

SANY STC1000T6 vs XCMG QY100K5C, every figure

SANY STC1000T6 dimensions

SANY STC1000T6, side view with dimensions (illustration)3.95 m15 m
Side view
SANY STC1000T6, front view (illustration)2.8 m
Front view
Overall height
3.95 m
Overall length
15 m
Overall width
2.8 m

Illustration; figures from the maker's sheet.

How big is the SANY STC1000T6?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

SANY STC1000T6 drawn to scale beside a person, a pickup truck and a 40 ft container. The SANY STC1000T6 is 15 m long - about 1.2 forty-foot containers - and 3.95 m tall, 2.3 times a person's height.SANY STC1000T615 × 3.95 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The SANY STC1000T6 is 15 m long - about 1.2 forty-foot containers - and 3.95 m tall, 2.3 times a person's height.

SANY STC1000T6 load chart

What it lifts as the radius grows, from the maker’s chart. Not for lift planning.

  1. 90 t3 m12.9 m boom
  2. 35.8 t10 m21.6 m boom
  3. 15 t20 m30.3 m boom
  4. 7.6 t30 m47.6 m boom

Every radius and boom length, 3 configurations, with a reader.

Full load chart

SANY STC1000T6 specifications

Figures are the maker's unless marked: est. is our estimate, and any figure from another site names it. Each links to where it came from. Sheet last updated 17 November 2026.

65 figures in 4 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length14.995 m[1] p.17
Overall width2.8 m[1] p.17
Overall height3.95 m[1] p.17
Ground clearance (minimum)0.302 m[1] p.17
Front extension (boom nose to bumper)2.153 mPrinted in brackets on the drawing[1] p.16
Front overhang2.775 m[1] p.16
Axle spacing, axles 1-21.52 m[1] p.16
Axle spacing, axles 2-34.305 m[1] p.16
Axle spacing, axles 3-41.5 m[1] p.16
Dimensions, part 2 of 2
FigureValue (metric)Source
Rear overhang2.742 m[1] p.16
Approach angle18°[1] p.17
Departure angle13°[1] p.17
Tail slewing radius4.542 m[1] p.17
Outrigger span, longitudinal6.53 mThe table prints 8 x 6.53; the plan view shows 6,530 mm along the machine[1] p.16
Outrigger span, transverse (max)8 m[1] p.16
Turning radius (vehicle, min)12.3 m[1] p.17
Turning radius at boom tip (min)15.4 m[1] p.17
Carrier length12.842 mest.Estimate: front overhang 2.775 m + axle spacings 1.52 / 4.305 / 1.5 m + rear overhang 2.742 m (front bumper to rear of frame)[1] p.16

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Gross vehicle weight47,200 kgTravel configuration without boom-nose sheaves, outrigger floats, spare tyre and counterweight; hook block tied on the frame tail[1] p.17
Axle load, axles 1 / 2 / 3 / 411 / 11 / 12.6 / 12.6 t[1] p.18
Weight, part 2 of 2
FigureValue (metric)Source
Counterweight30.2 tMaximum; 8 combinations from 0 to 30.2 t (2.2 / 7.2 / 8.2 / 13.2 / 19.2 / 25.2 / 30.2 t); remote-controlled mounting[1] p.19
Counterweight carried while travelling19.2 tShort distance, low speed[1] p.8

Crane

Crane, part 1 of 2
FigureValue (metric)Source
Max lifting capacity100 tAt 2.5 m radius (minimum rated radius), 12.9 m boom[1] p.17
Main boom length (m, fully extended)60 m[1] p.17
Main boom length retracted (m)12.9 m[1] p.17
Main boom + jib length77.5 m[1] p.17
Main boom + boom extension + jib length87 mWith the optional 9.5 m boom extension[1] p.17
Boom sections6, oval cross-section, single-cylinder pin telescoping[1] p.17
Max tip height60.5 mFully extended main boom[1] p.17
Max tip height with jib77.5 m[1] p.17
Max tip height with boom extension and jib87 m[1] p.17
Jib17.5 m fixed jib, optional 9.5 m extension, offsets 0 / 15 / 30 deg[1] p.6
Max load moment, basic boom3,557.5 kN.m[1] p.17
Max load moment, fully extended boom2,293.2 kN.m[1] p.17
Max load moment, boom + jib905.5 kN.m[1] p.17
Max load moment, boom + extension + jib588 kN.m[1] p.17
Max load at fully extended boom13.5 t[1] p.6
Crane, part 2 of 2
FigureValue (metric)Source
Rated capacity, 12.9 m boom at 7 m radius50 tFull counterweight (30.2 t), over 360 deg, 100 % chart[1] p.26
Rated capacity, 12.9 m boom at 10 m radius35.5 tSame chart[1] p.26
Boom elevation angle-1 to 80 deg[1] p.22
Boom raising / lowering time65 s / 90 s[1] p.18
Boom extension / retraction time480 s / 460 sAs printed on the sheet[1] p.18
Main winch single-line speed0-130 m/min, no load[1] p.18
Auxiliary winch single-line speed0-130 m/min, no load[1] p.18
Max single line pull8.3 tBoth winches[1] p.18
Main winch rope20 mm x 275 m[1] p.18
Auxiliary winch rope20 mm x 185 m[1] p.18
Slewing speed1.7 rpm (max)Minimum stable slewing speed below 0.1 deg/s[1] p.18
Hook block weight480 kg50 t double-eye block, 6 parts of line; 7.5 t block 150 kg; optional 55 t 595 kg, 75 t 707 kg, 90 t 830 kg, 100 t 1,030 kg[1] p.18
Outrigger extend / retract timeBeams out 25 s / in 20 s; jacks out 35 s / in 35 s[1] p.18
Control systemCAN bus, 10 in colour display, SANY load moment indicator; wireless remote for counterweight and slewing[1] p.7

Chassis

Chassis, part 1 of 2
FigureValue (metric)Source
Number of axles4 (8x4; axles 1-2 steered, axles 3-4 driven)Wheel formula also printed as 8x4x4 on p.21[1] p.10
Engine modelDF Cummins ISLe375 30, 6-cyl in-line, turbocharged and intercooled, Euro III[1] p.17
Gross power275 kW (369 hp)At 2,100 rpm[1] p.17
Max torque1,550 NmAt 1,200 rpm[1] p.17
Fuel tank450 L[1] p.10
TransmissionFAST manual, 10 forward / 2 reverse[1] p.10
Tyres385/95R25 front; 325/95R24 rear (dual)[1] p.21
Chassis, part 2 of 2
FigureValue (metric)Source
SuspensionIndependent leaf springs front; oscillating leaf-spring balance suspension rear[1] p.21
BrakesDrum brakes with ABS on all axles; parking brake on axles 2 / 3 / 4; exhaust brake[1] p.10
SteeringMechanical, hydraulic assist; axles 1 and 2 steered; emergency steering pump on gearbox[1] p.15
Top speed80 km/h[1] p.17
Gradeability (max)45 %[1] p.17
Fuel consumption per 100 km45 L[1] p.17
Operating temperature range-25 to +45 deg C[1] p.17

Build: SANY STC1000T6 100 t truck crane (6-section oval 12.9-60 m boom, 8x4 chassis, DF Cummins ISLe375 30 Euro III, 30.2 t maximum counterweight) per SANY's STC1000T6 specification V2.6, SANY Panama dealer-hosted copy. The drawing numbers on the page are ours; the maker's sheet prints the dimensions without letters.

  1. [1]SANY STC1000T6 truck crane specification V2.6, SANY Panama copy

SANY STC1000T6 against its rivals

The mobile cranes nearest in weight from other makers, figure by figure, each shown at the same scale.

SANY STC1000T6, XCMG QY100K5C, Liebherr LTM 1100-4.2, Tadano GR-1000XL-4: specifications side by side
FigureSANY STC1000T6this pageXCMG QY100K5C specsLiebherr LTM 1100-4.2 specsTadano GR-1000XL-4 specs
Gross power275 kW (369 hp)294 kW (394 hp)350 kW (476 hp)209 kW (280 hp)
Max torque1,550 Nm1,900 Nm2,230 Nm1,152 Nm
Fuel tank450 L470 L400 L300 L
Top speed80 km/h80 km/h75 km/h36 km/h
Overall width2.8 m2.8 m2.75 m3.315 m
Overall height3.95 m3.886 m3.95 m3.805 m
Every figureFull sheetSANY STC1000T6 vs XCMG QY100K5C

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • The SANY STC1000T6 leads none of these figures, so the choice comes down to price, hours and dealer support.
  • Pick the XCMG QY100K5C if you need a bigger fuel tank (470 L).
  • Pick the Liebherr LTM 1100-4.2 if you need more gross power (350 kW), more torque (2,230 Nm) and a narrower machine to move (2.75 m).
  • Pick the Tadano GR-1000XL-4 if you need a lower machine to move (3.805 m).

SANY STC1000T6 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

SANY STC1000T6 on EquipmentsFinder in the UAE now: 2 listed for rent, 1 listed for sale. Too few carry a price to give a SANY STC1000T6 range, so the figure below is for all mobile cranes.

See all 2

Typical hire, per daymedian of 30

AED 2,225 /day

No priced SANY STC1000T6 for hire yet: this is all mobile cranes

Low AED 1,000High AED 8,000

Who is asking for mobile cranes in the UAE

Contractors posted 72 requests for mobile cranes on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (33), Abu Dhabi (21) and Sharjah (7). Requests name a kind of machine, not a model, so this counts every mobile crane, the SANY STC1000T6 among them.

Requests, last 12 months
72
For Dubai
33
For Abu Dhabi
21
  • Crawler Cranes Required For RentDubai / 20 November 2026
  • Hiab Crane/Truck Crane 10 Ton or Above Required For RentDubai / 19 November 2026
  • 160 TON Crane Required For PurchaseAbu Dhabi / 18 November 2026

Open mobile crane requests on the Inquiry BoardPost a request for a SANY STC1000T6

Tools for a SANY STC1000T6

For the people who run one: codes, charts and calculators that fit a mobile crane.

Ranked: Mobile cranes by lifting capacity

By maximum lifting capacity, largest first. The SANY STC1000T6 is 14 of 25; every figure is the maker's.

  1. 10Tadano ATF 220G-5220 t
  2. 11Liebherr LTM 1160-5.2180 t
  3. 12SANY STC1600T7160 t
  4. 13Liebherr LTM 1100-4.2100 t
  5. 14SANY STC1000T6This page100 t
  6. 15XCMG QY100K5C100 t
  7. 16Tadano GR-1000XL-490.7 t
  8. 17Liebherr LTM 1090-4.290 t
  9. 18SANY STC800C580 t

Showing 10 to 18 of 25, the machines nearest the SANY STC1000T6 by maximum lifting capacity.

Popular SANY mobile crane models

SANY STC1000T6 fault codes and serial number

More SANY STC1000T6 questions

How much does a SANY STC1000T6 weigh?

47.2 tonnes: 47,200 kg (104,058 lb).

How long is the SANY STC1000T6's boom?

The main boom extends to 60 m (196 ft 10 in).

How high can a SANY STC1000T6 lift?

Its maximum tip height is 60.5 m (198 ft 6 in), fully extended main boom.

How much horsepower does the SANY STC1000T6 have?

369 hp (275 kW) gross, At 2,100 rpm.

How heavy is the counterweight on a SANY STC1000T6?

30.2 t (66,580 lb).

How many axles does a SANY STC1000T6 have?

4 (8x4; axles 1-2 steered, axles 3-4 driven).

What is the outrigger spread of a SANY STC1000T6?

8 m (26 ft 3 in) across.

How long is the jib on a SANY STC1000T6?

17.5 m fixed jib, optional 9.5 m extension, offsets 0 / 15 / 30 deg.

How tall is a SANY STC1000T6?

3.95 m (13 ft) overall.

What are the SANY STC1000T6's main competitors?

The machines nearest it in size are the XCMG QY100K5C, the Liebherr LTM 1500-8.1 and the Liebherr LTM 1100-4.2. Each has a side-by-side comparison on EquipmentsFinder.

Is the SANY STC1000T6 sold in the UAE?

Yes. The SANY STC1000T6 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a SANY STC1000T6 used for?

A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far. Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.

Embed this spec card

The SANY STC1000T6's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/sany-stc1000" title="SANY STC1000T6 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/sany-stc1000">SANY STC1000T6 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a SANY STC1000T6 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.