SANY STC1000T6
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

SANY · mobile crane

SANY STC1000T6

SANY STC1000T6 100 t truck crane (6-section oval 12.9-60 m boom, 8x4 chassis, DF Cummins ISLe375 30 Euro III, 30.2 t maximum counterweight) per SANY's STC1000T6 specification V2.6, SANY Panama dealer-hosted copy. The drawing numbers on the page are ours; the maker's sheet prints the dimensions without letters.

UAEGlobal

lifting capacity
100 t
Main boom length (m, fully extended)
60 m
tip height
60.5 m
power
275 kW (369 hp)
SANY STC1000T6, side view with dimensions (illustration)3.95 m15 m
SANY STC1000T6, front view (illustration)2.8 m

Dimensions

Approach angle
18°
Departure angle
13°
Tail slewing radius
4.542 m
Outrigger span, longitudinal (The table prints 8 x 6.53; the plan view shows 6,530 mm along the machine)
6.53 m
Outrigger span, transverse (max)
8 m
Turning radius (vehicle, min)
12.3 m
Turning radius at boom tip (min)
15.4 m
Carrier length (Estimate: front overhang 2.775 m + axle spacings 1.52 / 4.305 / 1.5 m + rear overhang 2.742 m (front bumper to rear of frame))
12.842 mest.

Weight

Gross vehicle weight (Travel configuration without boom-nose sheaves, outrigger floats, spare tyre and counterweight; hook block tied on the frame tail)
47,200 kg
Axle load, axles 1 / 2 / 3 / 4
11 / 11 / 12.6 / 12.6 t
Counterweight (Maximum; 8 combinations from 0 to 30.2 t (2.2 / 7.2 / 8.2 / 13.2 / 19.2 / 25.2 / 30.2 t); remote-controlled mounting)
30.2 t
Counterweight carried while travelling (Short distance, low speed)
19.2 t

Crane

Max lifting capacity (At 2.5 m radius (minimum rated radius), 12.9 m boom)
100 t
Main boom length (m, fully extended)
60 m
Main boom length retracted (m)
12.9 m
Main boom + jib length
77.5 m
Main boom + boom extension + jib length (With the optional 9.5 m boom extension)
87 m
Boom sections
6, oval cross-section, single-cylinder pin telescoping
Max tip height (Fully extended main boom)
60.5 m
Max tip height with jib
77.5 m
Max tip height with boom extension and jib
87 m
Jib
17.5 m fixed jib, optional 9.5 m extension, offsets 0 / 15 / 30 deg
Max load moment, basic boom
3,557.5 kN.m
Max load moment, fully extended boom
2,293.2 kN.m
Max load moment, boom + jib
905.5 kN.m
Max load moment, boom + extension + jib
588 kN.m
Max load at fully extended boom
13.5 t
Rated capacity, 12.9 m boom at 7 m radius (Full counterweight (30.2 t), over 360 deg, 100 % chart)
50 t
Rated capacity, 12.9 m boom at 10 m radius (Same chart)
35.5 t
Boom elevation angle
-1 to 80 deg
Boom raising / lowering time
65 s / 90 s
Boom extension / retraction time (As printed on the sheet)
480 s / 460 s
Main winch single-line speed
0-130 m/min, no load
Auxiliary winch single-line speed
0-130 m/min, no load
Max single line pull (Both winches)
8.3 t
Main winch rope
20 mm x 275 m
Auxiliary winch rope
20 mm x 185 m
Slewing speed (Minimum stable slewing speed below 0.1 deg/s)
1.7 rpm (max)
Hook block weight (50 t double-eye block, 6 parts of line; 7.5 t block 150 kg; optional 55 t 595 kg, 75 t 707 kg, 90 t 830 kg, 100 t 1,030 kg)
480 kg
Outrigger extend / retract time
Beams out 25 s / in 20 s; jacks out 35 s / in 35 s
Control system
CAN bus, 10 in colour display, SANY load moment indicator; wireless remote for counterweight and slewing

Chassis

Number of axles (Wheel formula also printed as 8x4x4 on p.21)
4 (8x4; axles 1-2 steered, axles 3-4 driven)
Engine model
DF Cummins ISLe375 30, 6-cyl in-line, turbocharged and intercooled, Euro III
Gross power (At 2,100 rpm)
275 kW (369 hp)
Max torque (At 1,200 rpm)
1,550 Nm
Fuel tank
450 L
Transmission
FAST manual, 10 forward / 2 reverse
Tyres
385/95R25 front; 325/95R24 rear (dual)
Suspension
Independent leaf springs front; oscillating leaf-spring balance suspension rear
Brakes
Drum brakes with ABS on all axles; parking brake on axles 2 / 3 / 4; exhaust brake
Steering
Mechanical, hydraulic assist; axles 1 and 2 steered; emergency steering pump on gearbox
Top speed
80 km/h
Gradeability (max)
45 %
Fuel consumption per 100 km
45 L
Operating temperature range
-25 to +45 deg C