EF Logo

mobile cranemade by LiebherrUAE, Global

Liebherr LTM 1090-4.2Specs and dimensions

Max lifting capacity
90 t
99.2 US tons
Main boom, extended
60 m
196.9 ft
Engine
Liebherr 6-cyl diesel

Quick answer

The Liebherr LTM 1090-4.2 is a mobile crane with a Liebherr 6-cyl diesel engine rated at 330 kW (449 hp). It lifts up to 90 t, reaches a tip height of 76 m and drives at up to 80 km/h. It suits lifting steel, precast and plant on building sites. Its rivals include the Liebherr LTM 1100-4.2 (100 t) and the Tadano GR-1000XL-4 (90.7 t).

Liebherr LTM 1090-4.2 (illustration)

What engine is in the Liebherr LTM 1090-4.2?

The Liebherr LTM 1090-4.2 is offered with Liebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96. The sheet's power figure is 330 kW (449 hp) gross. It makes 2,335 Nm (1,722 lbf·ft) of torque. The fuel tank holds 550 L (145.3 US gal). The figures are from Liebherr LTM 1090-4.2 technical data (Technische Daten / Technical Data, metric), Liebherr asset server.

How much can a Liebherr LTM 1090-4.2 lift?

The Liebherr LTM 1090-4.2 lifts up to 90 t, reaches a tip height of 76 m and drives at up to 80 km/h. In imperial units the lifting capacity is 99.2 US tons. The sheet notes: at 3 m radius, 11.4 m boom, 22.5 t counterweight, over 360 deg. On the same row of their sheets, the Liebherr LTM 1100-4.2 shows 100 t and the Tadano GR-1000XL-4 shows 90.7 t.

What are the Liebherr LTM 1090-4.2 dimensions?

The Liebherr LTM 1090-4.2 is 13.39 m (43 ft 11 in) long, 2.55 m (8 ft 4 in) wide and 3.95 m (13 ft) high. As it stands it is too big for the door of a standard shipping container. The Liebherr LTM 1100-4.2 is 13.50 m long, 2.75 m wide and 3.95 m high.

Liebherr LTM 1090-4.2 vs Liebherr LTM 1100-4.2: what is the difference?

The Liebherr LTM 1090-4.2 and the Liebherr LTM 1100-4.2 are both mobile cranes; this is where their sheets differ. The Liebherr LTM 1090-4.2 has more torque (2,335 Nm against 2,230 Nm), carries more fuel (550 L against 400 L) and is faster (80 km/h against 75 km/h). The Liebherr LTM 1100-4.2 has more gross power (350 kW against 330 kW).

Liebherr LTM 1090-4.2 dimensions

Liebherr LTM 1090-4.2, side view with dimensions (illustration)3.95 m13.4 m
Side view
Liebherr LTM 1090-4.2, front view (illustration)2.55 m
Front view
Overall height
3.95 m
Overall length
13.4 m
Overall width
2.55 m

Illustration; figures from the maker's sheet.

How big is the Liebherr LTM 1090-4.2?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Liebherr LTM 1090-4.2 drawn to scale beside a person, a pickup truck and a 40 ft container. The Liebherr LTM 1090-4.2 is 13.39 m long - about 1.1 forty-foot containers - and 3.95 m tall, 2.3 times a person's height.Liebherr LTM 1090-4.213.39 × 3.95 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Liebherr LTM 1090-4.2 is 13.39 m long - about 1.1 forty-foot containers - and 3.95 m tall, 2.3 times a person's height.

Liebherr LTM 1090-4.2 load chart

What it lifts as the radius grows, from a published copy of the maker’s chart. Not for lift planning.

  1. 59.2 t3 m11.4 m boom
  2. 24.7 t10 m18.9 m boom
  3. 9.9 t20 m22.6 m boom
  4. 4.9 t30 m33.8 m boom

Every radius and boom length, with a reader.

Full load chart

Liebherr LTM 1090-4.2 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 18 November 2026.

62 figures in 4 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall height3.95 m3.85 m with the chassis lowered by 100 mm; 4.0 m with 16.00 R 25 or 20.5 R 25 tyres (3.9 m lowered)[1] p.3
Overall width2.55 m2.69 m with 20.5 R 25 tyres[1] p.3
Track width2.16 m14.00 R 25 tyres; 2.10 m with 16.00 R 25, 2.17 m with 20.5 R 25[1] p.3
Height to top of counterweight3.644 m14.00 R 25 tyres; 3.694 m with larger tyres[1] p.3
Height of carrier frame at rear1.866 m14.00 R 25 tyres; 1.916 m with larger tyres; reading of dimension E on the drawing[1] p.3
Ground clearance (minimum)0.353 m14.00 R 25 tyres; 0.403 m with larger tyres[1] p.3
Angle of departure11°Smallest of the rear angles on the drawing (G, 14.00 R 25 tyres; 13 deg with larger tyres); angle H is 18 deg (19 deg)[1] p.3
Angle of approach20°Smallest of the front angles on the drawing (I, 14.00 R 25 tyres; 22 deg with larger tyres); angle K to the front bumper is 26 deg (27 deg)[1] p.3
Dimensions, part 2 of 2
FigureValue (metric)Source
Overall length13.39 mWith the 22.5 t counterweight; 13.09 m to the rear of the carrier[1] p.3
Carrier length11.551 mFront bumper to rear of the carrier[1] p.3
Boom head to front of carrier1.539 m[1] p.3
Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / rear overhang2.241 / 2.48 / 2.86 / 1.67 / 2.3 m[1] p.3
Tail slewing radius4.03 mWith the 22.5 t counterweight; 3.77 m with the lower counterweight[1] p.3
Outrigger span, longitudinal7.446 m7.474 m on the opposite side of the carrier[1] p.3
Outrigger span, transverse (max)7.3 m6.055 m and 4.81 m part-extended; 2.32-7.3 m with the optional VarioBase[1] p.3
Outrigger pad size500 x 500 mm[1] p.3

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Gross vehicle weight48,000 kgOn-road driving, 12 t per axle, with 8.8 t counterweight; 40 t (10 t per axle) with none[1] p.10
Gross vehicle weight, jobsite driving64,000 kgWith the 22.5 t counterweight, 16 t per axle[1] p.10
Axle load, on-road12,000 kgPer axle, maximum[1] p.10
Weight, part 2 of 2
FigureValue (metric)Source
Axle load, jobsite driving16,000 kgPer axle, maximum[1] p.10
Max outrigger reaction533 kNCrane superstructure on the outriggers; 400 kN (41 t) on the smaller support[1] p.9

Crane

Crane, part 1 of 2
FigureValue (metric)Source
Max lifting capacity90 tAt 3 m radius, 11.4 m boom, 22.5 t counterweight, over 360 deg[1] p.13
Main boom length (m, fully extended)60 m[1] p.25
Main boom length retracted (m)11.4 m[1] p.25
Boom sections7 (1 base section + 6 telescopic sections, TELEMATIK rapid-cycle telescoping)[1] p.25
Max tip height76 mLargest hoist height of all boom and jib systems, from the cover of the sheet[1] p.1
Max radius62 mLargest radius of all boom and jib systems, from the cover of the sheet[1] p.1
Boom elevation angleUp to 82 deg[1] p.9
Boom elevation timeApprox. 57 s to 82 deg[1] p.9
Boom extension timeApprox. 403 s from 11.4 m to 60 m[1] p.9
Counterweight8.8 tBasic counterweight[1] p.25
Max counterweight22.5 t13.7 t additional counterweight (option), VarioBallast[1] p.25
Swing-away jib K9.5 m single, or 9.5-16 m double; 0 / 20 / 40 deg mechanical adjustment; NZK hydraulic 0-40 deg[1] p.25
Assembly jib2 mOption; 0 / 20 / 40 / 60 deg[1] p.25
Hoist 1 single-line speed0-135 m/min; 17 mm rope, 240 m, 63 kN pull[1] p.9
Crane, part 2 of 2
FigureValue (metric)Source
Hoist 2 single-line speed0-135 m/min; 17 mm rope, 240 m, 63 kN pull (second hoist is optional)[1] p.9
Slewing speed0-1.5 rpm, 360 deg[1] p.9
Hook block, 68 t760 kg7 sheaves, 12 lines[1] p.9
Hook block, 59.2 t530 kg5 sheaves, 10 lines[1] p.9
Hook block, 42.3 t450 kg3 sheaves, 7 lines[1] p.9
Hook block, 18.7 t300 kg1 sheave, 3 lines[1] p.9
Hook block, 6.3 t140 kg1 line[1] p.9
Crane driveDiesel-hydraulic; axial-piston variable pumps with automatic power control and 1 double gear pump, driven by the carrier engine; open circuits with electrically controlled load sensing, 4 movements at once[1] p.25
Hoist gearAxial-piston fixed motor, planetary gear in the drum, spring-loaded holding brake[1] p.25
Luffing gear1 differential cylinder with safety check valves[1] p.25
Slewing gearAxial-piston fixed motor, planetary gear, spring-loaded holding brake; switchable between free-slewing and locked[1] p.25
Crane cabSafety glazing, tilts back 20 deg[1] p.25
Crane controlLICCON2 safe load indicator, two self-centring joysticks[1] p.25

Chassis

Chassis, part 1 of 2
FigureValue (metric)Source
Number of axles4, all axles steered; axles 2, 3 and 4 with planetary gears[1] p.25
Engine modelLiebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96[1] p.25
Gross power330 kW (449 hp)[1] p.25
Max torque2,335 Nm[1] p.25
Fuel tank550 L[1] p.25
TransmissionAutomated 12-speed with oil-cooled multi-disc clutch and intarder; two-stage distributor gear with lockable differential[1] p.25
Tyres385/95 R 25 (14.00 R 25); 445/95 R 25 (16.00 R 25) or 525/80 R 25 (20.5 R 25) optional[1] p.25
Chassis, part 2 of 2
FigureValue (metric)Source
SuspensionHydropneumatic on all axles with automatic levelling, hydraulically lockable[1] p.25
BrakesDual-circuit all-wheel air service brake with discs on all axles, spring-loaded parking brake on axles 2-4, exhaust retarder with Liebherr additional braking system, intarder[1] p.25
SteeringDual-circuit hydraulic power steering with active speed-dependent rear-axle steering and special steering programmes[1] p.25
Top speed80 km/h385/95 R 25 tyres; 85 kph with larger tyres[1] p.9
Minimum driving speed0.44 km/h (0.48 km/h with larger tyres)[1] p.9
Gradeability (max)Over 60 % theoretical, all tyre sizes[1] p.9
Electrical system24 V DC, data-bus technique[1] p.25

Build: Liebherr LTM 1090-4.2, 4-axle 90 t all-terrain crane (Liebherr 6-cyl 330 kW carrier engine, 385/95 R 25 (14.00 R 25) tyres, 11.4-60 m telescopic boom, 8.8 t basic counterweight, 22.5 t maximum with VarioBallast) per Liebherr's multilingual technical data sheet. Letters A-F, H and K are those printed on the sheet's dimension drawing; L-N are assigned here.

  1. [1]Liebherr LTM 1090-4.2 technical data (Technische Daten / Technical Data, metric), Liebherr asset server

Liebherr LTM 1090-4.2 against its rivals

The mobile cranes nearest in weight from other makers, figure by figure, each shown at the same scale.

Liebherr LTM 1090-4.2, Liebherr LTM 1100-4.2, Tadano GR-1000XL-4, XCMG QY100K5C: specifications side by side
FigureLiebherr LTM 1090-4.2this pageLiebherr LTM 1100-4.2 specsTadano GR-1000XL-4 specsXCMG QY100K5C specs
Gross power330 kW (449 hp)350 kW (476 hp)209 kW (280 hp)294 kW (394 hp)
Max torque2,335 Nm2,230 Nm1,152 Nm1,900 Nm
Fuel tank550 L400 L300 L470 L
Top speed80 km/h75 km/h36 km/h80 km/h
Overall width2.55 m2.75 m3.315 m2.8 m
Overall height3.95 m3.95 m3.805 m3.886 m
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Liebherr LTM 1090-4.2 if you need more torque (2,335 Nm), a bigger fuel tank (550 L) and a narrower machine to move (2.55 m).
  • Pick the Liebherr LTM 1100-4.2 if you need more gross power (350 kW).
  • Pick the Tadano GR-1000XL-4 if you need a lower machine to move (3.805 m).

Liebherr LTM 1090-4.2 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

No Liebherr LTM 1090-4.2 is listed in the UAE on EquipmentsFinder right now. The prices below are for all mobile cranes, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 30

AED 2,225 /day

No priced Liebherr LTM 1090-4.2 for hire yet: this is all mobile cranes

Low AED 1,000High AED 8,000

No Liebherr LTM 1090-4.2 for rent listed right now.

Request a Liebherr LTM 1090-4.2

Who is asking for mobile cranes in the UAE

Contractors posted 72 requests for mobile cranes on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (33), Abu Dhabi (21) and Sharjah (7). Requests name a kind of machine, not a model, so this counts every mobile crane, the Liebherr LTM 1090-4.2 among them.

Requests, last 12 months
72
For Dubai
33
For Abu Dhabi
21
  • Crawler Cranes Required For RentDubai / 20 November 2026
  • Hiab Crane/Truck Crane 10 Ton or Above Required For RentDubai / 19 November 2026
  • 160 TON Crane Required For PurchaseAbu Dhabi / 18 November 2026

Open mobile crane requests on the Inquiry BoardPost a request for a Liebherr LTM 1090-4.2

Tools for a Liebherr LTM 1090-4.2

For the people who run one: codes, charts and calculators that fit a mobile crane.

Ranked: Mobile cranes by lifting capacity

By maximum lifting capacity, largest first. The Liebherr LTM 1090-4.2 is 17 of 25; every figure is the maker's.

  1. 13Liebherr LTM 1100-4.2100 t
  2. 14SANY STC1000T6100 t
  3. 15XCMG QY100K5C100 t
  4. 16Tadano GR-1000XL-490.7 t
  5. 17Liebherr LTM 1090-4.2This page90 t
  6. 18SANY STC800C580 t
  7. 19XCMG XCT8080 t
  8. 20Zoomlion ZTC800V53280 t
  9. 21Liebherr LTM 1060-3.160 t

Showing 13 to 21 of 25, the machines nearest the Liebherr LTM 1090-4.2 by maximum lifting capacity.

Popular Liebherr mobile crane models

More Liebherr LTM 1090-4.2 questions

How much does a Liebherr LTM 1090-4.2 weigh?

48 tonnes: 48,000 kg (105,822 lb).

How long is the Liebherr LTM 1090-4.2's boom?

The main boom extends to 60 m (196.9 ft).

How high can a Liebherr LTM 1090-4.2 lift?

Its maximum tip height is 76 m (249.3 ft).

How heavy is the counterweight on a Liebherr LTM 1090-4.2?

8.8 t (9.7 US tons), basic counterweight.

How many axles does a Liebherr LTM 1090-4.2 have?

4, all axles steered; axles 2, 3 and 4 with planetary gears.

What is the outrigger spread of a Liebherr LTM 1090-4.2?

7.3 m (24 ft) across.

How tall is a Liebherr LTM 1090-4.2?

3.95 m (13 ft) overall.

What is the tail swing radius of a Liebherr LTM 1090-4.2?

4.03 m (13.2 ft).

How wide is a Liebherr LTM 1090-4.2?

2.55 m (8 ft 4 in) overall.

What are the Liebherr LTM 1090-4.2's main competitors?

The machines nearest it in size are the XCMG QY100K5C, the Liebherr LTM 1500-8.1 and the Liebherr LTM 1100-4.2. Each has a side-by-side comparison on EquipmentsFinder.

Is the Liebherr LTM 1090-4.2 sold in the UAE?

Yes. The Liebherr LTM 1090-4.2 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Liebherr LTM 1090-4.2 used for?

A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far. Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.

Embed this spec card

The Liebherr LTM 1090-4.2's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/liebherr-ltm1090" title="Liebherr LTM 1090-4.2 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/liebherr-ltm1090">Liebherr LTM 1090-4.2 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Liebherr LTM 1090-4.2 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.