EF Logo

mobile cranemade by LiebherrUAE, Global

Liebherr LTM 1060-3.1Specs and dimensions

Max lifting capacity
60 t
66.1 US tons
Main boom, extended
48 m
157.5 ft
Engine
Liebherr 6-cyl diesel

Quick answer

The Liebherr LTM 1060-3.1 is a mobile crane with a Liebherr 6-cyl diesel engine rated at 270 kW (367 hp). It lifts up to 60 t, reaches a tip height of 63 m and drives at up to 80 km/h. It suits lifting steel, precast and plant on building sites. Its rivals include the Tadano GR-500EXL (51 t) and the Sany STC500 (50 t).

Liebherr LTM 1060-3.1 (illustration)

What engine is in the Liebherr LTM 1060-3.1?

The Liebherr LTM 1060-3.1 is offered with Liebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96. The sheet's power figure is 270 kW (367 hp) gross. It makes 1,908 Nm (1,407 lbf·ft) of torque. The fuel tank holds 350 L (92.5 US gal). The figures are from Liebherr LTM 1060-3.1 technical data (Technische Daten / Technical Data, metric), Liebherr asset server.

How much can a Liebherr LTM 1060-3.1 lift?

The Liebherr LTM 1060-3.1 lifts up to 60 t, reaches a tip height of 63 m and drives at up to 80 km/h. In imperial units the lifting capacity is 66.1 US tons. The sheet notes: at 2.1 m radius, 10.3 m boom, 12.8 t counterweight, over rear. On the same row of their sheets, the Tadano GR-500EXL shows 51 t and the Sany STC500 shows 50 t.

What are the Liebherr LTM 1060-3.1 dimensions?

The Liebherr LTM 1060-3.1 is 11.98 m (39 ft 3 in) long, 2.55 m (8 ft 4 in) wide and 3.75 m (12 ft 4 in) high. As it stands it is too big for the door of a standard shipping container. The Tadano GR-500EXL is 13.39 m long, 2.96 m wide and 3.87 m high.

Liebherr LTM 1060-3.1 vs Tadano GR-500EXL: what is the difference?

The Liebherr LTM 1060-3.1 and the Tadano GR-500EXL are both mobile cranes; this is where their sheets differ. The Liebherr LTM 1060-3.1 has more gross power (270 kW against 200 kW), has more torque (1,908 Nm against 785 Nm) and carries more fuel (350 L against 300 L). Both sets of figures are the makers’ own, for the builds on our sheets.

Liebherr LTM 1060-3.1 dimensions

Liebherr LTM 1060-3.1, side view with dimensions (illustration)3.75 m12 m
Side view
Liebherr LTM 1060-3.1, front view (illustration)2.55 m
Front view
Overall height
3.75 m
Overall length
12 m
Overall width
2.55 m

Illustration; figures from the maker's sheet.

How big is the Liebherr LTM 1060-3.1?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Liebherr LTM 1060-3.1 drawn to scale beside a person, a pickup truck and a 40 ft container. The Liebherr LTM 1060-3.1 is 11.98 m long - about the length of a forty-foot container - and 3.75 m tall, 2.1 times a person's height.Liebherr LTM 1060-3.111.98 × 3.75 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Liebherr LTM 1060-3.1 is 11.98 m long - about the length of a forty-foot container - and 3.75 m tall, 2.1 times a person's height.

Liebherr LTM 1060-3.1 load chart

What it lifts as the radius grows, from the maker’s chart. Not for lift planning.

  1. 42.3 t3 m10.3 m boom
  2. 15.9 t10 m20.7 m boom
  3. 5.7 t20 m24.2 m boom
  4. 2.8 t30 m34.6 m boom

Every radius and boom length, 4 configurations, with a reader.

Full load chart

Liebherr LTM 1060-3.1 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 18 November 2026.

62 figures in 4 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall height3.75 m3.65 m with the chassis lowered by 100 mm; 3.80 m with 16.00 R 25 or 20.5 R 25 tyres (3.70 m lowered)[1] p.3
Overall width2.55 m2.69 m with 20.5 R 25 tyres[1] p.3
Track width2.16 m14.00 R 25 tyres; 2.10 m with 16.00 R 25, 2.17 m with 20.5 R 25[1] p.3
Height to top of counterweight3.498 m14.00 R 25 tyres; 3.548 m with larger tyres[1] p.3
Height to underside of counterweight2.863 m14.00 R 25 tyres; 2.913 m with larger tyres[1] p.3
Height of carrier frame at rear1.71 m14.00 R 25 tyres; 1.76 m with larger tyres; reading of dimension F on the drawing[1] p.3
Ground clearance (minimum)0.375 m14.00 R 25 tyres; 0.425 m with larger tyres[1] p.3
Angle of approach13°Smallest of the front angles on the drawing (I, 14.00 R 25 tyres; 15 deg with larger tyres); angle L is 20 deg (21 deg)[1] p.3
Dimensions, part 2 of 2
FigureValue (metric)Source
Angle of departure10°Smallest of the rear angles on the drawing (H, 14.00 R 25 tyres; 12 deg with larger tyres); angles I and K are 13 and 21 deg (15 and 23 deg)[1] p.3
Overall length11.976 mWith the 12.8 t counterweight; 11.53 m with the 5.5 t counterweight[1] p.3
Carrier length9.459 mFront bumper to rear of the carrier[1] p.3
Axle spacing, bumper-1 / 1-2 / 2-3 / rear overhang2.787 / 3.0 / 1.65 / 2.022 m[1] p.3
Tail slewing radius3.54 mWith the 5.5 t counterweight; 3.986 m with 12.8 t[1] p.3
Outrigger span, longitudinal7.341 m7.359 m on the opposite side of the carrier[1] p.3
Outrigger span, transverse (max)6.298 m4.502 m with outriggers part-extended; 2.318-6.298 m with the optional VarioBase[1] p.3
Outrigger pad size500 x 500 mm[1] p.3

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Gross vehicle weight36,000 kgOn-road driving, 12 t per axle, with up to 5.5 t counterweight carried[1] p.7
Gross vehicle weight, jobsite driving46,000 kgWith the 12.8 t counterweight, 15.5 t per axle[1] p.7
Axle load, on-road12,000 kgPer axle, maximum[1] p.7
Weight, part 2 of 2
FigureValue (metric)Source
Axle load, jobsite driving15,500 kgPer axle, maximum[1] p.7
Max outrigger reaction445 kNCrane superstructure on the outriggers; 280 kN (29 t) on the smaller support[1] p.8

Crane

Crane, part 1 of 2
FigureValue (metric)Source
Max lifting capacity60 tAt 2.1 m radius, 10.3 m boom, 12.8 t counterweight, over rear[1] p.11
Main boom length (m, fully extended)48 m[1] p.24
Main boom length retracted (m)10.3 m[1] p.24
Boom sections6 (1 base section + 5 telescopic sections, TELEMATIK rapid-cycle telescoping)[1] p.24
Max tip height63 mLargest hoist height of all boom and jib systems, from the cover of the sheet[1] p.1
Max radius48 mLargest radius of all boom and jib systems, from the cover of the sheet[1] p.1
Boom elevation angleUp to 82 deg[1] p.8
Boom elevation timeApprox. 60 s to 82 deg[1] p.8
Boom extension timeApprox. 405 s from 10.3 m to 48 m[1] p.8
Counterweight5.5 tBasic counterweight[1] p.24
Max counterweight12.8 t7.3 t additional counterweight (option)[1] p.24
Swing-away jib K9.5 m single, or 9.5-16 m double; 0 / 20 / 40 deg mechanical adjustment[1] p.24
Assembly jib2.5 mOption[1] p.24
Hoist 1 single-line speed0-130 m/min; 15 mm rope, 220 m, 45 kN pull[1] p.8
Crane, part 2 of 2
FigureValue (metric)Source
Hoist 2 single-line speed0-130 m/min; 15 mm rope, 220 m, 45 kN pull (second hoist is optional)[1] p.8
Slewing speed0-1.5 rpm, 360 deg[1] p.8
Hook block, 60 t400 kg7 sheaves, 15 lines[1] p.8
Hook block, 46.1 t400 kg5 sheaves, 11 lines[1] p.8
Hook block, 30.2 t280 kg3 sheaves, 7 lines[1] p.8
Hook block, 13.3 t200 kg1 sheave, 3 lines[1] p.8
Hook block, 4.5 t100 kg1 line[1] p.8
Crane driveDiesel-hydraulic; 1 axial-piston variable pump with automatic power control and 1 double gear pump, driven by the carrier engine; open circuits with electrically controlled load sensing, 4 movements at once[1] p.25
Hoist gearAxial-piston fixed motor, planetary gear in the drum, spring-loaded holding brake[1] p.25
Luffing gear1 differential cylinder with pilot-operated brake valve[1] p.25
Slewing gearAxial-piston fixed motor, planetary gear, spring-loaded holding brake; switchable between free-slewing and locked[1] p.25
Crane cabSafety glazing, tilts back 20 deg[1] p.25
Crane controlLICCON2 safe load indicator, joysticks, Liebherr system bus (LSB)[1] p.25

Chassis

Chassis, part 1 of 2
FigureValue (metric)Source
Number of axles3, all axles steered; axles 2 and 3 driven; optional 6x6 drive (axle 1 also driven)[1] p.25
Engine modelLiebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96[1] p.25
Gross power270 kW (367 hp)[1] p.25
Max torque1,908 Nm[1] p.25
Fuel tank350 L[1] p.25
TransmissionAutomated 12-speed with oil-cooled multi-disc clutch; single-stage transfer case with lockable differential[1] p.25
Tyres385/95 R 25 (14.00 R 25); 445/95 R 25 (16.00 R 25) or 525/80 R 25 (20.5 R 25) optional[1] p.25
Chassis, part 2 of 2
FigureValue (metric)Source
SuspensionHydropneumatic on all axles, hydraulically lockable[1] p.25
BrakesDual-circuit all-wheel air service brake with discs on all axles, spring-loaded parking brake on axles 1-3, exhaust retarder with additional Liebherr braking system[1] p.25
SteeringDual-circuit hydraulic power steering with active speed-dependent rear-axle steering and special steering programmes[1] p.25
Top speed80 km/h385/95 R 25 tyres; 85 kph with larger tyres[1] p.8
Minimum driving speed1.75 km/h (1.91 km/h with larger tyres)[1] p.8
Gradeability (max)Over 60 % theoretical, all tyre sizes[1] p.8
Electrical system24 V DC, data-bus technique[1] p.25

Build: Liebherr LTM 1060-3.1, 3-axle 60 t all-terrain crane (Liebherr 6-cyl 270 kW carrier engine, 385/95 R 25 (14.00 R 25) tyres, 10.3-48 m telescopic boom, 5.5 t basic counterweight, 12.8 t maximum) per Liebherr's multilingual technical data sheet. Letters A-E, G, K and L are those printed on the sheet's dimension drawing; M and N are assigned here.

  1. [1]Liebherr LTM 1060-3.1 technical data (Technische Daten / Technical Data, metric), Liebherr asset server

Liebherr LTM 1060-3.1 against its rivals

The mobile cranes nearest in weight from other makers, figure by figure, each shown at the same scale.

Liebherr LTM 1060-3.1, Tadano GR-500EXL, Sany STC500, XCMG QY50KA: specifications side by side
FigureLiebherr LTM 1060-3.1this pageTadano GR-500EXL specsSany STC500 specsXCMG QY50KA specs
Gross power270 kW (367 hp)200 kW (267 hp)250 kW (335 hp)276 kW (370 hp)
Max torque1,908 Nm785 Nm1,425 Nm1,560 Nm
Fuel tank350 L300 L350 L320 L
Top speed80 km/h48 km/h85 km/h85 km/h
Overall width2.55 m2.96 m2.8 m2.78 m
Overall height3.75 m3.865 m3.8 m3.63 m
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Liebherr LTM 1060-3.1 if you need more torque (1,908 Nm) and a narrower machine to move (2.55 m).
  • Pick the XCMG QY50KA if you need more gross power (276 kW) and a lower machine to move (3.63 m).

Liebherr LTM 1060-3.1 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

No Liebherr LTM 1060-3.1 is listed in the UAE on EquipmentsFinder right now. The prices below are for all mobile cranes, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 30

AED 2,225 /day

No priced Liebherr LTM 1060-3.1 for hire yet: this is all mobile cranes

Low AED 1,000High AED 8,000

No Liebherr LTM 1060-3.1 for rent listed right now.

Request a Liebherr LTM 1060-3.1

Who is asking for mobile cranes in the UAE

Contractors posted 72 requests for mobile cranes on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (33), Abu Dhabi (21) and Sharjah (7). Requests name a kind of machine, not a model, so this counts every mobile crane, the Liebherr LTM 1060-3.1 among them.

Requests, last 12 months
72
For Dubai
33
For Abu Dhabi
21
  • Crawler Cranes Required For RentDubai / 20 November 2026
  • Hiab Crane/Truck Crane 10 Ton or Above Required For RentDubai / 19 November 2026
  • 160 TON Crane Required For PurchaseAbu Dhabi / 18 November 2026

Open mobile crane requests on the Inquiry BoardPost a request for a Liebherr LTM 1060-3.1

Tools for a Liebherr LTM 1060-3.1

For the people who run one: codes, charts and calculators that fit a mobile crane.

Ranked: Mobile cranes by lifting capacity

By maximum lifting capacity, largest first. The Liebherr LTM 1060-3.1 is 21 of 25; every figure is the maker's.

  1. 17Liebherr LTM 1090-4.290 t
  2. 18SANY STC800C580 t
  3. 19XCMG XCT8080 t
  4. 20Zoomlion ZTC800V53280 t
  5. 21Liebherr LTM 1060-3.1This page60 t
  6. 22Tadano GR-500EXL51 t
  7. 23Sany STC50050 t
  8. 24Tadano TR-500M-350 t
  9. 25XCMG QY50KA50 t

Showing 17 to 25 of 25, the machines nearest the Liebherr LTM 1060-3.1 by maximum lifting capacity.

Popular Liebherr mobile crane models

More Liebherr LTM 1060-3.1 questions

How much does a Liebherr LTM 1060-3.1 weigh?

36 tonnes: 36,000 kg (79,366 lb).

How long is the Liebherr LTM 1060-3.1's boom?

The main boom extends to 48 m (157.5 ft).

How high can a Liebherr LTM 1060-3.1 lift?

Its maximum tip height is 63 m (206.7 ft).

How heavy is the counterweight on a Liebherr LTM 1060-3.1?

5.5 t (6.1 US tons), basic counterweight.

How many axles does a Liebherr LTM 1060-3.1 have?

3, all axles steered; axles 2 and 3 driven; optional 6x6 drive (axle 1 also driven).

What is the outrigger spread of a Liebherr LTM 1060-3.1?

6.298 m (20.7 ft) across.

How tall is a Liebherr LTM 1060-3.1?

3.75 m (12 ft 4 in) overall.

What is the tail swing radius of a Liebherr LTM 1060-3.1?

3.54 m (11.6 ft).

How wide is a Liebherr LTM 1060-3.1?

2.55 m (8 ft 4 in) overall.

What are the Liebherr LTM 1060-3.1's main competitors?

The machines nearest it in size are the XCMG QY100K5C, the Liebherr LTM 1500-8.1 and the Liebherr LTM 1100-4.2. Each has a side-by-side comparison on EquipmentsFinder.

Is the Liebherr LTM 1060-3.1 sold in the UAE?

Yes. The Liebherr LTM 1060-3.1 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Liebherr LTM 1060-3.1 used for?

A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far. Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.

Embed this spec card

The Liebherr LTM 1060-3.1's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/liebherr-ltm1060" title="Liebherr LTM 1060-3.1 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/liebherr-ltm1060">Liebherr LTM 1060-3.1 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Liebherr LTM 1060-3.1 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.