EF Logo

mobile cranemade by LiebherrUAE, Global

Liebherr LTM 1500-8.1Specs and dimensions

Max lifting capacity
500 t
551.2 US tons
Main boom, extended
50 m
164 ft
Engine
Liebherr D9508 A7

Quick answer

The Liebherr LTM 1500-8.1 is a mobile crane with a Liebherr D9508 A7 engine rated at 500 kW (680 hp). It lifts up to 500 t and drives at up to 75 km/h. It suits lifting steel, precast and plant on building sites and erecting tower cranes and site cabins. People compare it with the Liebherr LTM 1250-5.1 (250 t) and the Liebherr LTM 11200-9.1 (1,200 t).

Liebherr LTM 1500-8.1 (illustration)

What engine is in the Liebherr LTM 1500-8.1?

The Liebherr LTM 1500-8.1 is offered with Liebherr D9508 A7, 8-cyl, stage 3 / Tier 3. The sheet's power figure is 500 kW (680 hp) gross (At 1,900 min-1; rating basis not stated). It makes 3,000 Nm (2,213 lbf·ft) of torque. The fuel tank holds 600 L (158.5 US gal).

How much can a Liebherr LTM 1500-8.1 lift?

The Liebherr LTM 1500-8.1 lifts up to 500 t and drives at up to 75 km/h. In imperial units the lifting capacity is 551.2 US tons. The sheet notes: at 3 m radius, 16.1 m boom, 135 t counterweight, over rear. On the same row of their sheets, the Liebherr LTM 1250-5.1 shows 250 t and the Liebherr LTM 11200-9.1 shows 1,200 t.

What are the Liebherr LTM 1500-8.1 dimensions?

The Liebherr LTM 1500-8.1 is 20.97 m (68 ft 10 in) long, 3.00 m (9 ft 10 in) wide and 3.95 m (13 ft) high. As it stands it is too big for the door of a standard shipping container. The Liebherr LTM 1250-5.1 is 15.96 m long, 3.00 m wide and 3.95 m high.

Liebherr LTM 1500-8.1 vs Liebherr LTM 1250-5.1: what is the difference?

The Liebherr LTM 1500-8.1 and the Liebherr LTM 1250-5.1 are both mobile cranes; this is where their sheets differ. The Liebherr LTM 1500-8.1 has more gross power (500 kW against 400 kW) and has more torque (3,000 Nm against 2,516 Nm). The Liebherr LTM 1250-5.1 carries more fuel (750 L against 600 L) and is faster (80 km/h against 75 km/h).

Liebherr LTM 1500-8.1 vs Liebherr LTM 1250-5.1, every figure

Liebherr LTM 1500-8.1 dimensions

Liebherr LTM 1500-8.1, side view with dimensions (illustration)3.95 m21 m
Side view
Liebherr LTM 1500-8.1, front view (illustration)3 m
Front view
Overall height
3.95 m
Overall length
21 m
Overall width
3 m

Illustration; figures from the maker's sheet.

How big is the Liebherr LTM 1500-8.1?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Liebherr LTM 1500-8.1 drawn to scale beside a person, a pickup truck and a 40 ft container. The Liebherr LTM 1500-8.1 is 20.97 m long - about 1.7 forty-foot containers - and 3.95 m tall, 2.3 times a person's height.Liebherr LTM 1500-8.120.97 × 3.95 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Liebherr LTM 1500-8.1 is 20.97 m long - about 1.7 forty-foot containers - and 3.95 m tall, 2.3 times a person's height.

Liebherr LTM 1500-8.1 load chart

What it lifts as the radius grows, from a published copy of the maker’s chart. Not for lift planning.

  1. 500 t3 m16.1 m boom
  2. 147 t10 m16.1 m boom
  3. 71 t20 m26.5 m boom
  4. 42 t30 m31.7 m boom

Every radius and boom length, 3 configurations, with a reader.

Full load chart

Liebherr LTM 1500-8.1 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

54 figures in 4 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall height3.95 m14.00 R 25 tyres; 4.0 m with 16.00 R 25 / 20.5 R 25[1] p.94
Overall width3 m14.00 R 25 and 16.00 R 25 tyres; 3.23 m with 20.5 R 25[1] p.94
Track width2.612 m14.00 R 25 tyres; 2.552 m (16.00 R 25), 2.702 m (20.5 R 25)[1] p.94
Height to top of superstructure3.66 m14.00 R 25 tyres; 3.71 m with larger tyres[1] p.94
Height to underside of counterweight1.925 m14.00 R 25 tyres; 1.975 m with larger tyres[1] p.94
Overall length20.97 mBoom head to rear of carrier; 21.385 m to the rear of the counterweight[1] p.94
Carrier length18.63 mFront bumper to rear of carrier[1] p.94
Boom head to front of carrier2.34 m[1] p.94
Dimensions, part 2 of 2
FigureValue (metric)Source
Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / 5-6 / 6-7 / 7-8 / rear overhang2.63 / 1.65 / 1.65 / 2.8 / 1.65 / 1.65 / 2.25 / 1.65 / 2.7 m[1] p.94
Tail slewing radius6.015 m[1] p.94
Outrigger span, longitudinal10 m10.012 / 9.99 m on the drawing[1] p.97
Outrigger span, transverse (max)9.6 m6.25 m intermediate[1] p.97
Outrigger pad size700 x 700 mm[1] p.94
Outrigger span, longitudinal, per side9.99 m on one side (5.92 m ahead of / 4.07 m behind the slewing centre) and 10.012 m on the other (5.483 m / 4.529 m), as drawn[1] p.94
Approach angle10°Angle G at the front on the drawing, 14.00 R 25 tyres; 12 deg with 16.00 R 25 or 20.5 R 25[1] p.94
Angle of departure10°Smallest of the rear angles on the drawing (G, 14.00 R 25 tyres; 12 deg with larger tyres); angle F to the carrier tail is 17 deg (19 deg)[1] p.94

Weight

Weight
FigureValue (metric)Source
Gross vehicle weight96,000 kgWith the 50 m telescopic boom, 12 t per axle on 8 axles[1] p.95

Crane

Crane, part 1 of 2
FigureValue (metric)Source
Max lifting capacity500 tAt 3 m radius, 16.1 m boom, 135 t counterweight, over rear[1] p.4
Main boom length (m, fully extended)50 mVariant 1; variant 2 extends to 84 m[1] p.97
Main boom length retracted (m)16.1 m[1] p.97
Main boom length (variant 2, fully extended)84 m16.1-84 m, 1 base + 6 telescopic sections[1] p.97
Boom sections4 (1 base + 3 telescopic, TELEMATIK); variant 2: 7[1] p.97
Boom elevation angleUp to 83 deg[1] p.95
Max radius48 mTelescopic boom (T 50 m); 72 m with the 63 m fixed lattice jib (TF)[1] p.4
Counterweight135 t1 base slab of 15 t + 8 slabs of 15 t[1] p.97
Max counterweight165 t2 additional 15 t slabs, required with the guyed boom[1] p.97
JibFixed lattice jib 14-63 m (luffing lattice jib 21-91 m, see below)[1] p.97
Luffing lattice jib21-91 m[1] p.97
Telescopic boom extension14 m lattice section for the 50 m boom, to mount the luffing or fixed jib[1] p.97
Crane, part 2 of 2
FigureValue (metric)Source
Guying system YGuying frame with 2 rope winches, fits the 50 m or 84 m boom; spacer S and eccentric E to raise jib capacity[1] p.97
Boom elevation timeApprox. 70 s to 83 deg[1] p.95
Boom extension timeApprox. 330 s from 16.1 m to 50 m[1] p.95
Main winch single-line speed0-130 m/min; 25 mm rope, 620 m, 126 kN pull[1] p.95
Hoist 2 single-line speed0-145 m/min; 25 mm rope, 620 m, 126 kN pull[1] p.95
Hoist 3 single-line speed0-130 m/min; 25 mm rope, 1,050 m, 126 kN pull[1] p.95
Slewing speed0-1 rpm, 360 deg (two slewing gears)[1] p.95
Hook block weight6,100 kgHook block for 274.1 t[1] p.95
Crane engineLiebherr D936L A6, 6-cyl, 240 kW (326 hp) at 1,800 min-1, 1,500 Nm at 1,300-1,500 min-1[1] p.97
Counterweight slabs1 basic slab of 15 t plus 8 slabs of 15 t (135 t); 2 further 15 t slabs for 165 t[1] p.97
Luffing gear2 differential hydraulic rams with non-return valves[1] p.97
Crane driveDiesel-hydraulic; 4 variable-displacement pumps in closed circuit for hoisting, slewing and luffing of the lattice jib; 3 pumps in open circuit for luffing and telescoping[1] p.97

Chassis

Chassis, part 1 of 2
FigureValue (metric)Source
Number of axles8 (axles 1-4 and 7-8 steered, axles 1, 2, 4 and 5 planetary)[1] p.97
Engine modelLiebherr D9508 A7, 8-cyl, stage 3 / Tier 3[1] p.97
Gross power500 kW (680 hp)At 1,900 min-1; rating basis not stated[1] p.97
Max torque3,000 NmAt 1,100-1,500 min-1[1] p.97
Fuel tank600 L[1] p.97
TransmissionZF TC-TRONIC automatic with torque converter and intarder, 12 forward / 2 reverse, transfer case with locking differential[1] p.97
Tyres14.00 R 25, 16 tyres, singles (16.00 R 25 and 20.5 R 25 optional)[1] p.97
Chassis, part 2 of 2
FigureValue (metric)Source
SuspensionHydropneumatic with automatic levelling, load equalisation between axle pairs, lockable[1] p.97
BrakesDual-circuit air service brake, exhaust brake, retarder and Telma eddy-current brake[1] p.97
Top speed75 km/h14.00 R 25 tyres, gear 12; 80 km/h with 16.00 R 25 or 20.5 R 25[1] p.95
Gradeability (max)37.4 % (14.00 R 25); 33.9 % with larger tyres[1] p.95
SteeringZF semi-integral dual-circuit power steering with axle-driven backup pump; axles 1-4 and 7-8 steered[1] p.97
Electrical system24 V, 2 batteries of 170 Ah[1] p.97

Build: Liebherr LTM 1500-8.1, 8-axle 500 t all-terrain crane in its 50 m telescopic boom version (16.1-50 m, 135 t counterweight, 96 t total weight, 14.00 R 25 tyres) per Liebherr's multilingual technical data sheet, Sarens-hosted copy. The 84 m boom version (variant 2) shares the carrier and dimensions on this sheet; its load charts are not in this copy.

  1. [1]Liebherr LTM 1500-8.1 technical data, 50 m boom (Technische Daten / Technical Data), Sarens-hosted copy

Liebherr LTM 1500-8.1 against its rivals

The mobile cranes nearest in weight from other makers, figure by figure, each shown at the same scale.

Liebherr LTM 1500-8.1, Liebherr LTM 1250-5.1, Liebherr LTM 11200-9.1, Liebherr LTM 1400-7.1: specifications side by side
FigureLiebherr LTM 1500-8.1this pageLiebherr LTM 1250-5.1 specsLiebherr LTM 11200-9.1 specsLiebherr LTM 1400-7.1 specs
Gross power500 kW (680 hp)400 kW (544 hp)500 kW (680 hp)440 kW (598 hp)
Max torque3,000 Nm2,516 Nm3,000 Nm2,600 Nm
Fuel tank600 L750 L600 L600 L
Top speed75 km/h80 km/h80 km/h75 km/h
Overall height3.95 m3.95 m4 m4 m
Every figureFull sheetLiebherr LTM 1500-8.1 vs Liebherr LTM 1250-5.1

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • The Liebherr LTM 1500-8.1 leads none of these figures, so the choice comes down to price, hours and dealer support.
  • Pick the Liebherr LTM 1250-5.1 if you need a bigger fuel tank (750 L).

Liebherr LTM 1500-8.1 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

Liebherr LTM 1500-8.1 on EquipmentsFinder in the UAE now: 3 listed for rent, none for sale. Too few carry a price to give a Liebherr LTM 1500-8.1 range, so the figure below is for all mobile cranes.

See all 3

Typical hire, per daymedian of 30

AED 2,225 /day

No priced Liebherr LTM 1500-8.1 for hire yet: this is all mobile cranes

Low AED 1,000High AED 8,000

Who is asking for mobile cranes in the UAE

Contractors posted 72 requests for mobile cranes on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (33), Abu Dhabi (21) and Sharjah (7). Requests name a kind of machine, not a model, so this counts every mobile crane, the Liebherr LTM 1500-8.1 among them.

Requests, last 12 months
72
For Dubai
33
For Abu Dhabi
21
  • Crawler Cranes Required For RentDubai / 20 November 2026
  • Hiab Crane/Truck Crane 10 Ton or Above Required For RentDubai / 19 November 2026
  • 160 TON Crane Required For PurchaseAbu Dhabi / 18 November 2026

Open mobile crane requests on the Inquiry BoardPost a request for a Liebherr LTM 1500-8.1

Tools for a Liebherr LTM 1500-8.1

For the people who run one: codes, charts and calculators that fit a mobile crane.

Ranked: Mobile cranes by lifting capacity

By maximum lifting capacity, largest first. The Liebherr LTM 1500-8.1 is 3 of 25; every figure is the maker's.

  1. 1Liebherr LTM 11200-9.11,200 t
  2. 2Liebherr LTM 1750-9.1800 t
  3. 3Liebherr LTM 1500-8.1This page500 t
  4. 4Liebherr LTM 1400-7.1400 t
  5. 5Grove GMK6300L-1300 t
  6. 6Liebherr LTM 1300-6.2300 t
  7. 7Grove GMK5250L250 t
  8. 8Liebherr LTM 1250-5.1250 t
  9. 9Liebherr LTM 1230-5.1230 t

Showing 1 to 9 of 25, the machines nearest the Liebherr LTM 1500-8.1 by maximum lifting capacity.

Popular Liebherr mobile crane models

More Liebherr LTM 1500-8.1 questions

How much does a Liebherr LTM 1500-8.1 weigh?

96 tonnes: 96,000 kg (211,644 lb).

How long is the Liebherr LTM 1500-8.1's boom?

The main boom extends to 50 m (164 ft).

How heavy is the counterweight on a Liebherr LTM 1500-8.1?

135 t (148.8 US tons).

How many axles does a Liebherr LTM 1500-8.1 have?

8 (axles 1-4 and 7-8 steered, axles 1, 2, 4 and 5 planetary).

What is the outrigger spread of a Liebherr LTM 1500-8.1?

9.6 m (31.5 ft) across, 6.25 m intermediate.

How long is the jib on a Liebherr LTM 1500-8.1?

Fixed lattice jib 14-63 m (luffing lattice jib 21-91 m, see below).

How tall is a Liebherr LTM 1500-8.1?

3.95 m (13 ft) overall.

What is the tail swing radius of a Liebherr LTM 1500-8.1?

6.015 m (19.7 ft).

How wide is a Liebherr LTM 1500-8.1?

3.00 m (9 ft 10 in) overall.

What are the Liebherr LTM 1500-8.1's main competitors?

The machines nearest it in size are the XCMG QY100K5C, the Liebherr LTM 1100-4.2 and the Sany STC500. Each has a side-by-side comparison on EquipmentsFinder.

Is the Liebherr LTM 1500-8.1 sold in the UAE?

Yes. The Liebherr LTM 1500-8.1 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Liebherr LTM 1500-8.1 used for?

A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far. Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.

Embed this spec card

The Liebherr LTM 1500-8.1's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/liebherr-ltm1500" title="Liebherr LTM 1500-8.1 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/liebherr-ltm1500">Liebherr LTM 1500-8.1 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Liebherr LTM 1500-8.1 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.