EF Logo

mobile cranemade by LiebherrUAE, Global

Liebherr LTM 1250-5.1Specs and dimensions

Max lifting capacity
250 t
275.6 US tons
Main boom, extended
60 m
196.9 ft
Engine
Liebherr 6-cyl diesel

Quick answer

The Liebherr LTM 1250-5.1 is a mobile crane with a Liebherr 6-cyl diesel engine rated at 400 kW (544 hp). It lifts up to 250 t, reaches a tip height of 108 m and drives at up to 80 km/h. It suits lifting steel, precast and plant on building sites. People compare it with the Liebherr LTM 1100-4.2 (100 t) and the Liebherr LTM 1500-8.1 (500 t).

Liebherr LTM 1250-5.1 (illustration)

What engine is in the Liebherr LTM 1250-5.1?

The Liebherr LTM 1250-5.1 is offered with Liebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96; single engine also drives the crane. The sheet's power figure is 400 kW (544 hp) gross (Rating basis and rpm not stated). It makes 2,516 Nm (1,856 lbf·ft) of torque. The fuel tank holds 750 L (198.1 US gal).

How much can a Liebherr LTM 1250-5.1 lift?

The Liebherr LTM 1250-5.1 lifts up to 250 t, reaches a tip height of 108 m and drives at up to 80 km/h. In imperial units the lifting capacity is 275.6 US tons. The sheet notes: at 3 m radius, 360 deg, 88 t counterweight. On the same row of their sheets, the Liebherr LTM 1100-4.2 shows 100 t and the Liebherr LTM 1500-8.1 shows 500 t.

What are the Liebherr LTM 1250-5.1 dimensions?

The Liebherr LTM 1250-5.1 is 15.96 m (52 ft 4 in) long, 3.00 m (9 ft 10 in) wide and 3.95 m (13 ft) high. As it stands it is too big for the door of a standard shipping container. The Liebherr LTM 1100-4.2 is 13.50 m long, 2.75 m wide and 3.95 m high.

Liebherr LTM 1250-5.1 vs Liebherr LTM 1100-4.2: what is the difference?

The Liebherr LTM 1250-5.1 and the Liebherr LTM 1100-4.2 are both mobile cranes; this is where their sheets differ. The Liebherr LTM 1250-5.1 has more gross power (400 kW against 350 kW), has more torque (2,516 Nm against 2,230 Nm) and carries more fuel (750 L against 400 L). The Liebherr LTM 1100-4.2 is narrower to transport (2.75 m against 3 m).

Liebherr LTM 1250-5.1 dimensions

Liebherr LTM 1250-5.1, side view with dimensions (illustration)3.95 m16 m
Side view
Liebherr LTM 1250-5.1, front view (illustration)3 m
Front view
Overall height
3.95 m
Overall length
16 m
Overall width
3 m

Illustration; figures from the maker's sheet.

How big is the Liebherr LTM 1250-5.1?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Liebherr LTM 1250-5.1 drawn to scale beside a person, a pickup truck and a 40 ft container. The Liebherr LTM 1250-5.1 is 15.96 m long - about 1.3 forty-foot containers - and 3.95 m tall, 2.3 times a person's height.Liebherr LTM 1250-5.115.96 × 3.95 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Liebherr LTM 1250-5.1 is 15.96 m long - about 1.3 forty-foot containers - and 3.95 m tall, 2.3 times a person's height.

Liebherr LTM 1250-5.1 load chart

What it lifts as the radius grows, from a published copy of the maker’s chart. Not for lift planning.

  1. 134 t3 m13.1 m boom
  2. 72.7 t10 m26 m boom
  3. 35.1 t20 m26 m boom
  4. 20.6 t30 m34.6 m boom

Every radius and boom length, with a reader.

Full load chart

Liebherr LTM 1250-5.1 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 16 November 2026.

51 figures in 4 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall height3.95 m14.00 R 25 tyres; 4.0 m with 16.00 / 20.5 R 25 tyres, 3.825 m with the suspension lowered[1] p.3
Overall width3 m14.00 R 25 and 16.00 R 25 tyres; 3.1 m with 20.5 R 25[1] p.3
Track width2.61 m14.00 R 25 tyres; 2.55 m (16.00 R 25) and 2.57 m (20.5 R 25)[1] p.3
Height to top of superstructure3.697 m14.00 R 25 tyres; 3.747 m with larger tyres[1] p.3
Height to underside of counterweight1.95 m14.00 R 25 tyres; 2.0 m with larger tyres[1] p.3
Ground clearance (minimum)0.378 m14.00 R 25 tyres; 0.428 m with larger tyres[1] p.3
Overall length15.958 mBoom head to rear of carrier; 16.718 m to the rear of the counterweight[1] p.3
Carrier length13.815 mFront bumper to rear of carrier[1] p.3
Dimensions, part 2 of 2
FigureValue (metric)Source
Boom head to front of carrier2.143 m[1] p.3
Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / rear overhang2.499 / 2.75 / 1.7 / 2.45 / 1.65 / 2.766 m[1] p.3
Tail slewing radius4.78 mVarioBallast radius; 5.58 m with the 88 t counterweight (5.568 m on the drawing)[1] p.9
Outrigger span, longitudinal9.308 m9.328 m on the right-hand side of the drawing[1] p.3
Outrigger span, transverse (max)8.294 mIntermediate 6.894 m and 5.484 m; 2.674 m beams retracted (VarioBase only)[1] p.3
Approach angle13°Smallest of the front angles on the drawing (G, 14.00 R 25 tyres; 15 deg with larger tyres); angle K to the hook block is 15 deg (17 deg)[1] p.3
Angle of departure9°Smallest of the rear angles on the drawing (I, 14.00 R 25 tyres; 10 deg with larger tyres); angles H and L are 11 and 13 deg[1] p.3

Weight

Weight
FigureValue (metric)Source
Gross vehicle weight60,000 kgRoad travel, 12 t per axle, no counterweight[1] p.10
Gross vehicle weight, jobsite driving62,000 kg13 t per axle; 82 t at 16.5 t per axle with 16 t ballast and the lattice jib carried[1] p.10
Max outrigger reaction820 kN84 t; 1,134 kN (116 t) for the second outrigger configuration shown on the sheet[1] p.8

Crane

Crane, part 1 of 2
FigureValue (metric)Source
Max lifting capacity250 tAt 3 m radius, 360 deg, 88 t counterweight[1] p.17
Main boom length (m, fully extended)60 m[1] p.72
Main boom length retracted (m)13.1 m[1] p.72
Boom sections6 (1 base section + 5 telescopic sections, TELEMATIK rapid-cycle telescoping)[1] p.72
Max tip height108 mMaximum hoist height, boom with jib systems[1] p.1
Max radius96 mMaximum radius, boom with jib systems[1] p.1
Counterweight68 tBasic; 20 t additional for 88 t total[1] p.72
Max counterweight88 t[1] p.72
Swing-away jib K / NZK5.4 m and 12.2-22 m, 29 m, 36 m; 0 / 22.5 / 45 deg, or hydraulically adjustable 0-45 deg (NZK)[1] p.73
Fixed lattice jib NZF8-50 m, hydraulically adjustable 0-45 deg[1] p.73
Crane, part 2 of 2
FigureValue (metric)Source
Strong jib S4-46 m, 0 deg[1] p.73
Telescopic boom extension V2 x 7 m[1] p.73
Boom elevation angleUp to 82 deg[1] p.8
Boom elevation timeApprox. 55 s to 82 deg[1] p.8
Boom extension timeApprox. 440 s from 13.1 m to 60 m[1] p.8
Hoist 1 single-line speed0-129 m/min; 23 mm rope, 350 m, 105 kN pull[1] p.8
Hoist 2 single-line speed0-129 m/min; 23 mm rope, 280 m, 105 kN pull (second hoist is optional)[1] p.8
Slewing speed0-1.2 rpm, 360 deg[1] p.8
Hook block, 151 t2,000 kg9 sheaves, 16 lines; 142.5 t block 1.7 t (7 / 15), 107.7 t 1.6 t (5 / 11), 70.6 t 1.45 t (3 / 7), 31.2 t 0.84 t (1 / 3), 10.5 t 0.5 t[1] p.8

Chassis

Chassis, part 1 of 2
FigureValue (metric)Source
Number of axles5, all axles steered; optional 10x8 drive (3rd axle driven)[1] p.72
Engine modelLiebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96; single engine also drives the crane[1] p.72
Gross power400 kW (544 hp)Rating basis and rpm not stated[1] p.72
Max torque2,516 Nm[1] p.72
Fuel tank750 L[1] p.72
TransmissionZF 12-speed with automated shifting and ZF intarder, two-stage transfer case with lockable differential[1] p.72
Tyres385/95 R 25 (14.00 R 25); 445/95 R 25 and 525/80 R 25 optional[1] p.72
Chassis, part 2 of 2
FigureValue (metric)Source
SuspensionHydropneumatic "Niveaumatik", hydraulically lockable, all axles[1] p.72
BrakesDual-circuit air brake with discs on all axles, exhaust flap, ZF intarder, Telma eddy-current brake optional[1] p.72
Top speed80 km/h14.00 R 25 tyres; 85 km/h with 16.00 R 25 or 20.5 R 25[1] p.8
Minimum driving speed0.4 km/h (0.5 km/h with larger tyres)[1] p.8
Gradeability (max)Over 60 % theoretical (14.00 R 25); 56.5 % with larger tyres[1] p.8
SteeringDual-circuit hydraulic power steering; active speed-dependent rear-axle steering with special steering programmes; all 5 axles steered[1] p.73
Electrical system24 V DC, data-bus technology[1] p.73

Build: Liebherr LTM 1250-5.1, 5-axle 250 t all-terrain crane (Liebherr 6-cyl 400 kW carrier engine, 385/95 R 25 (14.00 R 25) tyres, 13.1-60 m telescopic boom, 68 t basic counterweight, 88 t maximum) per Liebherr's multilingual technical data sheet, dealer-hosted copy; later production adds Stage V engine wording but the sheet's figures are unchanged.

  1. [1]Liebherr LTM 1250-5.1 technical data (Technische Daten / Technical Data), skaks.dk-hosted copy

Liebherr LTM 1250-5.1 against its rivals

The mobile cranes nearest in weight from other makers, figure by figure, each shown at the same scale.

Liebherr LTM 1250-5.1, Liebherr LTM 1100-4.2, Liebherr LTM 1500-8.1, Tadano ATF 220G-5: specifications side by side
FigureLiebherr LTM 1250-5.1this pageLiebherr LTM 1100-4.2 specsLiebherr LTM 1500-8.1 specsTadano ATF 220G-5 specs
Gross power400 kW (544 hp)350 kW (476 hp)500 kW (680 hp)not on its sheet
Max torque2,516 Nm2,230 Nm3,000 Nm2,400 Nm
Fuel tank750 L400 L600 L530 L
Top speed80 km/h75 km/h75 km/h85 km/h
Overall width3 m2.75 m3 m3 m
Overall height3.95 m3.95 m3.95 m3.94 m
Every figureFull sheetLiebherr LTM 1250-5.1 vs Liebherr LTM 1500-8.1

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Liebherr LTM 1250-5.1 if you need a bigger fuel tank (750 L).
  • Pick the Liebherr LTM 1100-4.2 if you need a narrower machine to move (2.75 m).
  • Pick the Liebherr LTM 1500-8.1 if you need more gross power (500 kW) and more torque (3,000 Nm).
  • Pick the Tadano ATF 220G-5 if you need more speed (85 km/h) and a lower machine to move (3.94 m).

Liebherr LTM 1250-5.1 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

Liebherr LTM 1250-5.1 on EquipmentsFinder in the UAE now: 1 listed for rent, 1 listed for sale. Too few carry a price to give a Liebherr LTM 1250-5.1 range, so the figure below is for all mobile cranes.

See all 1

Typical hire, per daymedian of 30

AED 2,225 /day

No priced Liebherr LTM 1250-5.1 for hire yet: this is all mobile cranes

Low AED 1,000High AED 8,000

Who is asking for mobile cranes in the UAE

Contractors posted 72 requests for mobile cranes on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (33), Abu Dhabi (21) and Sharjah (7). Requests name a kind of machine, not a model, so this counts every mobile crane, the Liebherr LTM 1250-5.1 among them.

Requests, last 12 months
72
For Dubai
33
For Abu Dhabi
21
  • Crawler Cranes Required For RentDubai / 20 November 2026
  • Hiab Crane/Truck Crane 10 Ton or Above Required For RentDubai / 19 November 2026
  • 160 TON Crane Required For PurchaseAbu Dhabi / 18 November 2026

Open mobile crane requests on the Inquiry BoardPost a request for a Liebherr LTM 1250-5.1

Tools for a Liebherr LTM 1250-5.1

For the people who run one: codes, charts and calculators that fit a mobile crane.

Ranked: Mobile cranes by lifting capacity

By maximum lifting capacity, largest first. The Liebherr LTM 1250-5.1 is 8 of 25; every figure is the maker's.

  1. 4Liebherr LTM 1400-7.1400 t
  2. 5Grove GMK6300L-1300 t
  3. 6Liebherr LTM 1300-6.2300 t
  4. 7Grove GMK5250L250 t
  5. 8Liebherr LTM 1250-5.1This page250 t
  6. 9Liebherr LTM 1230-5.1230 t
  7. 10Tadano ATF 220G-5220 t
  8. 11Liebherr LTM 1160-5.2180 t
  9. 12SANY STC1600T7160 t

Showing 4 to 12 of 25, the machines nearest the Liebherr LTM 1250-5.1 by maximum lifting capacity.

Popular Liebherr mobile crane models

More Liebherr LTM 1250-5.1 questions

How much does a Liebherr LTM 1250-5.1 weigh?

60 tonnes: 60,000 kg (132,277 lb).

How long is the Liebherr LTM 1250-5.1's boom?

The main boom extends to 60 m (196.9 ft).

How high can a Liebherr LTM 1250-5.1 lift?

Its maximum tip height is 108 m (354.3 ft).

How heavy is the counterweight on a Liebherr LTM 1250-5.1?

68 t (75 US tons).

How many axles does a Liebherr LTM 1250-5.1 have?

5, all axles steered; optional 10x8 drive (3rd axle driven).

What is the outrigger spread of a Liebherr LTM 1250-5.1?

8.294 m (27.2 ft) across.

How tall is a Liebherr LTM 1250-5.1?

3.95 m (13 ft) overall.

What is the tail swing radius of a Liebherr LTM 1250-5.1?

4.78 m (15.7 ft).

How wide is a Liebherr LTM 1250-5.1?

3.00 m (9 ft 10 in) overall.

What are the Liebherr LTM 1250-5.1's main competitors?

The machines nearest it in size are the XCMG QY100K5C, the Liebherr LTM 1500-8.1 and the Liebherr LTM 1100-4.2. Each has a side-by-side comparison on EquipmentsFinder.

Is the Liebherr LTM 1250-5.1 sold in the UAE?

Yes. The Liebherr LTM 1250-5.1 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Liebherr LTM 1250-5.1 used for?

A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far. Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.

Embed this spec card

The Liebherr LTM 1250-5.1's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/liebherr-ltm1250" title="Liebherr LTM 1250-5.1 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/liebherr-ltm1250">Liebherr LTM 1250-5.1 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Liebherr LTM 1250-5.1 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.