Liebherr LTM 1250-5.1
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Liebherr · mobile crane

Liebherr LTM 1250-5.1

Liebherr LTM 1250-5.1, 5-axle 250 t all-terrain crane (Liebherr 6-cyl 400 kW carrier engine, 385/95 R 25 (14.00 R 25) tyres, 13.1-60 m telescopic boom, 68 t basic counterweight, 88 t maximum) per Liebherr's multilingual technical data sheet, dealer-hosted copy; later production adds Stage V engine wording but the sheet's figures are unchanged.

UAEGlobal

lifting capacity
250 t
Main boom length (m, fully extended)
60 m
tip height
108 m
power
400 kW (544 hp)
Liebherr LTM 1250-5.1, side view with dimensions (illustration)3.95 m16 m
Liebherr LTM 1250-5.1, front view (illustration)3 m

Dimensions

Carrier length (Front bumper to rear of carrier)
13.815 m
Boom head to front of carrier
2.143 m
Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / rear overhang
2.499 / 2.75 / 1.7 / 2.45 / 1.65 / 2.766 m
Tail slewing radius (VarioBallast radius; 5.58 m with the 88 t counterweight (5.568 m on the drawing))
4.78 m
Outrigger span, longitudinal (9.328 m on the right-hand side of the drawing)
9.308 m
Outrigger span, transverse (max) (Intermediate 6.894 m and 5.484 m; 2.674 m beams retracted (VarioBase only))
8.294 m
Approach angle (Smallest of the front angles on the drawing (G, 14.00 R 25 tyres; 15 deg with larger tyres); angle K to the hook block is 15 deg (17 deg))
13°
Angle of departure (Smallest of the rear angles on the drawing (I, 14.00 R 25 tyres; 10 deg with larger tyres); angles H and L are 11 and 13 deg)
9°

Weight

Gross vehicle weight (Road travel, 12 t per axle, no counterweight)
60,000 kg
Gross vehicle weight, jobsite driving (13 t per axle; 82 t at 16.5 t per axle with 16 t ballast and the lattice jib carried)
62,000 kg
Max outrigger reaction (84 t; 1,134 kN (116 t) for the second outrigger configuration shown on the sheet)
820 kN

Crane

Max lifting capacity (At 3 m radius, 360 deg, 88 t counterweight)
250 t
Main boom length (m, fully extended)
60 m
Main boom length retracted (m)
13.1 m
Boom sections
6 (1 base section + 5 telescopic sections, TELEMATIK rapid-cycle telescoping)
Max tip height (Maximum hoist height, boom with jib systems)
108 m
Max radius (Maximum radius, boom with jib systems)
96 m
Counterweight (Basic; 20 t additional for 88 t total)
68 t
Max counterweight
88 t
Swing-away jib K / NZK
5.4 m and 12.2-22 m, 29 m, 36 m; 0 / 22.5 / 45 deg, or hydraulically adjustable 0-45 deg (NZK)
Fixed lattice jib NZF
8-50 m, hydraulically adjustable 0-45 deg
Strong jib S
4-46 m, 0 deg
Telescopic boom extension V
2 x 7 m
Boom elevation angle
Up to 82 deg
Boom elevation time
Approx. 55 s to 82 deg
Boom extension time
Approx. 440 s from 13.1 m to 60 m
Hoist 1 single-line speed
0-129 m/min; 23 mm rope, 350 m, 105 kN pull
Hoist 2 single-line speed
0-129 m/min; 23 mm rope, 280 m, 105 kN pull (second hoist is optional)
Slewing speed
0-1.2 rpm, 360 deg
Hook block, 151 t (9 sheaves, 16 lines; 142.5 t block 1.7 t (7 / 15), 107.7 t 1.6 t (5 / 11), 70.6 t 1.45 t (3 / 7), 31.2 t 0.84 t (1 / 3), 10.5 t 0.5 t)
2,000 kg

Chassis

Number of axles
5, all axles steered; optional 10x8 drive (3rd axle driven)
Engine model
Liebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96; single engine also drives the crane
Gross power (Rating basis and rpm not stated)
400 kW (544 hp)
Max torque
2,516 Nm
Fuel tank
750 L
Transmission
ZF 12-speed with automated shifting and ZF intarder, two-stage transfer case with lockable differential
Tyres
385/95 R 25 (14.00 R 25); 445/95 R 25 and 525/80 R 25 optional
Suspension
Hydropneumatic "Niveaumatik", hydraulically lockable, all axles
Brakes
Dual-circuit air brake with discs on all axles, exhaust flap, ZF intarder, Telma eddy-current brake optional
Top speed (14.00 R 25 tyres; 85 km/h with 16.00 R 25 or 20.5 R 25)
80 km/h
Minimum driving speed
0.4 km/h (0.5 km/h with larger tyres)
Gradeability (max)
Over 60 % theoretical (14.00 R 25); 56.5 % with larger tyres
Steering
Dual-circuit hydraulic power steering; active speed-dependent rear-axle steering with special steering programmes; all 5 axles steered
Electrical system
24 V DC, data-bus technology