Liebherr LTM 1250-5.1
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Liebherr · mobile crane

Liebherr LTM 1250-5.1

Liebherr LTM 1250-5.1, 5-axle 250 t all-terrain crane (Liebherr 6-cyl 400 kW carrier engine, 385/95 R 25 (14.00 R 25) tyres, 13.1-60 m telescopic boom, 68 t basic counterweight, 88 t maximum) per Liebherr's multilingual technical data sheet, dealer-hosted copy; later production adds Stage V engine wording but the sheet's figures are unchanged.

UAEGlobal

lifting capacity
275.6 US tons
Main boom length (m, fully extended)
196.9 ft
tip height
354.3 ft
power
544 hp
Liebherr LTM 1250-5.1, side view with dimensions (illustration)13 ft52.4 ft
Liebherr LTM 1250-5.1, front view (illustration)9.8 ft

Dimensions

Carrier length (Front bumper to rear of carrier)
45.3 ft
Boom head to front of carrier
7 ft
Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / rear overhang
2.499 / 2.75 / 1.7 / 2.45 / 1.65 / 2.766 m
Tail slewing radius (VarioBallast radius; 5.58 m with the 88 t counterweight (5.568 m on the drawing))
15.7 ft
Outrigger span, longitudinal (9.328 m on the right-hand side of the drawing)
30.5 ft
Outrigger span, transverse (max) (Intermediate 6.894 m and 5.484 m; 2.674 m beams retracted (VarioBase only))
27.2 ft
Approach angle (Smallest of the front angles on the drawing (G, 14.00 R 25 tyres; 15 deg with larger tyres); angle K to the hook block is 15 deg (17 deg))
13°
Angle of departure (Smallest of the rear angles on the drawing (I, 14.00 R 25 tyres; 10 deg with larger tyres); angles H and L are 11 and 13 deg)
9°

Weight

Gross vehicle weight (Road travel, 12 t per axle, no counterweight)
132,277 lb
Gross vehicle weight, jobsite driving (13 t per axle; 82 t at 16.5 t per axle with 16 t ballast and the lattice jib carried)
136,686 lb
Max outrigger reaction (84 t; 1,134 kN (116 t) for the second outrigger configuration shown on the sheet)
184,343 lbf

Crane

Max lifting capacity (At 3 m radius, 360 deg, 88 t counterweight)
275.6 US tons
Main boom length (m, fully extended)
196.9 ft
Main boom length retracted (m)
43 ft
Boom sections
6 (1 base section + 5 telescopic sections, TELEMATIK rapid-cycle telescoping)
Max tip height (Maximum hoist height, boom with jib systems)
354.3 ft
Max radius (Maximum radius, boom with jib systems)
315 ft
Counterweight (Basic; 20 t additional for 88 t total)
75 US tons
Max counterweight
97 US tons
Swing-away jib K / NZK
5.4 m and 12.2-22 m, 29 m, 36 m; 0 / 22.5 / 45 deg, or hydraulically adjustable 0-45 deg (NZK)
Fixed lattice jib NZF
8-50 m, hydraulically adjustable 0-45 deg
Strong jib S
4-46 m, 0 deg
Telescopic boom extension V
2 x 7 m
Boom elevation angle
Up to 82 deg
Boom elevation time
Approx. 55 s to 82 deg
Boom extension time
Approx. 440 s from 13.1 m to 60 m
Hoist 1 single-line speed
0-129 m/min; 23 mm rope, 350 m, 105 kN pull
Hoist 2 single-line speed
0-129 m/min; 23 mm rope, 280 m, 105 kN pull (second hoist is optional)
Slewing speed
0-1.2 rpm, 360 deg
Hook block, 151 t (9 sheaves, 16 lines; 142.5 t block 1.7 t (7 / 15), 107.7 t 1.6 t (5 / 11), 70.6 t 1.45 t (3 / 7), 31.2 t 0.84 t (1 / 3), 10.5 t 0.5 t)
4,409 lb

Chassis

Number of axles
5, all axles steered; optional 10x8 drive (3rd axle driven)
Engine model
Liebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96; single engine also drives the crane
Gross power (Rating basis and rpm not stated)
544 hp
Max torque
1,856 lbf·ft
Fuel tank
198.1 US gal
Transmission
ZF 12-speed with automated shifting and ZF intarder, two-stage transfer case with lockable differential
Tyres
385/95 R 25 (14.00 R 25); 445/95 R 25 and 525/80 R 25 optional
Suspension
Hydropneumatic "Niveaumatik", hydraulically lockable, all axles
Brakes
Dual-circuit air brake with discs on all axles, exhaust flap, ZF intarder, Telma eddy-current brake optional
Top speed (14.00 R 25 tyres; 85 km/h with 16.00 R 25 or 20.5 R 25)
49.7 mph
Minimum driving speed
0.4 km/h (0.5 km/h with larger tyres)
Gradeability (max)
Over 60 % theoretical (14.00 R 25); 56.5 % with larger tyres
Steering
Dual-circuit hydraulic power steering; active speed-dependent rear-axle steering with special steering programmes; all 5 axles steered
Electrical system
24 V DC, data-bus technology