Liebherr LTM 1060-3.1
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Liebherr · mobile crane

Liebherr LTM 1060-3.1

Liebherr LTM 1060-3.1, 3-axle 60 t all-terrain crane (Liebherr 6-cyl 270 kW carrier engine, 385/95 R 25 (14.00 R 25) tyres, 10.3-48 m telescopic boom, 5.5 t basic counterweight, 12.8 t maximum) per Liebherr's multilingual technical data sheet. Letters A-E, G, K and L are those printed on the sheet's dimension drawing; M and N are assigned here.

UAEGlobal

lifting capacity
60 t
Main boom length (m, fully extended)
48 m
tip height
63 m
power
270 kW (367 hp)
Liebherr LTM 1060-3.1, side view with dimensions (illustration)3.75 m12 m
Liebherr LTM 1060-3.1, front view (illustration)2.55 m

Dimensions

Axle spacing, bumper-1 / 1-2 / 2-3 / rear overhang
2.787 / 3.0 / 1.65 / 2.022 m
Tail slewing radius (With the 5.5 t counterweight; 3.986 m with 12.8 t)
3.54 m
Outrigger span, longitudinal (7.359 m on the opposite side of the carrier)
7.341 m
Outrigger span, transverse (max) (4.502 m with outriggers part-extended; 2.318-6.298 m with the optional VarioBase)
6.298 m
Outrigger pad size
500 x 500 mm

Weight

Gross vehicle weight (On-road driving, 12 t per axle, with up to 5.5 t counterweight carried)
36,000 kg
Gross vehicle weight, jobsite driving (With the 12.8 t counterweight, 15.5 t per axle)
46,000 kg
Axle load, on-road (Per axle, maximum)
12,000 kg
Axle load, jobsite driving (Per axle, maximum)
15,500 kg
Max outrigger reaction (Crane superstructure on the outriggers; 280 kN (29 t) on the smaller support)
445 kN

Crane

Max lifting capacity (At 2.1 m radius, 10.3 m boom, 12.8 t counterweight, over rear)
60 t
Main boom length (m, fully extended)
48 m
Main boom length retracted (m)
10.3 m
Boom sections
6 (1 base section + 5 telescopic sections, TELEMATIK rapid-cycle telescoping)
Max tip height (Largest hoist height of all boom and jib systems, from the cover of the sheet)
63 m
Max radius (Largest radius of all boom and jib systems, from the cover of the sheet)
48 m
Boom elevation angle
Up to 82 deg
Boom elevation time
Approx. 60 s to 82 deg
Boom extension time
Approx. 405 s from 10.3 m to 48 m
Counterweight (Basic counterweight)
5.5 t
Max counterweight (7.3 t additional counterweight (option))
12.8 t
Swing-away jib K
9.5 m single, or 9.5-16 m double; 0 / 20 / 40 deg mechanical adjustment
Assembly jib (Option)
2.5 m
Hoist 1 single-line speed
0-130 m/min; 15 mm rope, 220 m, 45 kN pull
Hoist 2 single-line speed
0-130 m/min; 15 mm rope, 220 m, 45 kN pull (second hoist is optional)
Slewing speed
0-1.5 rpm, 360 deg
Hook block, 60 t (7 sheaves, 15 lines)
400 kg
Hook block, 46.1 t (5 sheaves, 11 lines)
400 kg
Hook block, 30.2 t (3 sheaves, 7 lines)
280 kg
Hook block, 13.3 t (1 sheave, 3 lines)
200 kg
Hook block, 4.5 t (1 line)
100 kg
Crane drive
Diesel-hydraulic; 1 axial-piston variable pump with automatic power control and 1 double gear pump, driven by the carrier engine; open circuits with electrically controlled load sensing, 4 movements at once
Hoist gear
Axial-piston fixed motor, planetary gear in the drum, spring-loaded holding brake
Luffing gear
1 differential cylinder with pilot-operated brake valve
Slewing gear
Axial-piston fixed motor, planetary gear, spring-loaded holding brake; switchable between free-slewing and locked
Crane cab
Safety glazing, tilts back 20 deg
Crane control
LICCON2 safe load indicator, joysticks, Liebherr system bus (LSB)

Chassis

Number of axles
3, all axles steered; axles 2 and 3 driven; optional 6x6 drive (axle 1 also driven)
Engine model
Liebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96
Gross power
270 kW (367 hp)
Max torque
1,908 Nm
Fuel tank
350 L
Transmission
Automated 12-speed with oil-cooled multi-disc clutch; single-stage transfer case with lockable differential
Tyres
385/95 R 25 (14.00 R 25); 445/95 R 25 (16.00 R 25) or 525/80 R 25 (20.5 R 25) optional
Suspension
Hydropneumatic on all axles, hydraulically lockable
Brakes
Dual-circuit all-wheel air service brake with discs on all axles, spring-loaded parking brake on axles 1-3, exhaust retarder with additional Liebherr braking system
Steering
Dual-circuit hydraulic power steering with active speed-dependent rear-axle steering and special steering programmes
Top speed (385/95 R 25 tyres; 85 kph with larger tyres)
80 km/h
Minimum driving speed
1.75 km/h (1.91 km/h with larger tyres)
Gradeability (max)
Over 60 % theoretical, all tyre sizes
Electrical system
24 V DC, data-bus technique