Liebherr LTM 1090-4.2
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Liebherr · mobile crane

Liebherr LTM 1090-4.2

Liebherr LTM 1090-4.2, 4-axle 90 t all-terrain crane (Liebherr 6-cyl 330 kW carrier engine, 385/95 R 25 (14.00 R 25) tyres, 11.4-60 m telescopic boom, 8.8 t basic counterweight, 22.5 t maximum with VarioBallast) per Liebherr's multilingual technical data sheet. Letters A-F, H and K are those printed on the sheet's dimension drawing; L-N are assigned here.

UAEGlobal

lifting capacity
90 t
Main boom length (m, fully extended)
60 m
tip height
76 m
power
330 kW (449 hp)
Liebherr LTM 1090-4.2, side view with dimensions (illustration)3.95 m13.4 m
Liebherr LTM 1090-4.2, front view (illustration)2.55 m

Dimensions

Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / rear overhang
2.241 / 2.48 / 2.86 / 1.67 / 2.3 m
Tail slewing radius (With the 22.5 t counterweight; 3.77 m with the lower counterweight)
4.03 m
Outrigger span, longitudinal (7.474 m on the opposite side of the carrier)
7.446 m
Outrigger span, transverse (max) (6.055 m and 4.81 m part-extended; 2.32-7.3 m with the optional VarioBase)
7.3 m
Outrigger pad size
500 x 500 mm

Weight

Gross vehicle weight (On-road driving, 12 t per axle, with 8.8 t counterweight; 40 t (10 t per axle) with none)
48,000 kg
Gross vehicle weight, jobsite driving (With the 22.5 t counterweight, 16 t per axle)
64,000 kg
Axle load, on-road (Per axle, maximum)
12,000 kg
Axle load, jobsite driving (Per axle, maximum)
16,000 kg
Max outrigger reaction (Crane superstructure on the outriggers; 400 kN (41 t) on the smaller support)
533 kN

Crane

Max lifting capacity (At 3 m radius, 11.4 m boom, 22.5 t counterweight, over 360 deg)
90 t
Main boom length (m, fully extended)
60 m
Main boom length retracted (m)
11.4 m
Boom sections
7 (1 base section + 6 telescopic sections, TELEMATIK rapid-cycle telescoping)
Max tip height (Largest hoist height of all boom and jib systems, from the cover of the sheet)
76 m
Max radius (Largest radius of all boom and jib systems, from the cover of the sheet)
62 m
Boom elevation angle
Up to 82 deg
Boom elevation time
Approx. 57 s to 82 deg
Boom extension time
Approx. 403 s from 11.4 m to 60 m
Counterweight (Basic counterweight)
8.8 t
Max counterweight (13.7 t additional counterweight (option), VarioBallast)
22.5 t
Swing-away jib K
9.5 m single, or 9.5-16 m double; 0 / 20 / 40 deg mechanical adjustment; NZK hydraulic 0-40 deg
Assembly jib (Option; 0 / 20 / 40 / 60 deg)
2 m
Hoist 1 single-line speed
0-135 m/min; 17 mm rope, 240 m, 63 kN pull
Hoist 2 single-line speed
0-135 m/min; 17 mm rope, 240 m, 63 kN pull (second hoist is optional)
Slewing speed
0-1.5 rpm, 360 deg
Hook block, 68 t (7 sheaves, 12 lines)
760 kg
Hook block, 59.2 t (5 sheaves, 10 lines)
530 kg
Hook block, 42.3 t (3 sheaves, 7 lines)
450 kg
Hook block, 18.7 t (1 sheave, 3 lines)
300 kg
Hook block, 6.3 t (1 line)
140 kg
Crane drive
Diesel-hydraulic; axial-piston variable pumps with automatic power control and 1 double gear pump, driven by the carrier engine; open circuits with electrically controlled load sensing, 4 movements at once
Hoist gear
Axial-piston fixed motor, planetary gear in the drum, spring-loaded holding brake
Luffing gear
1 differential cylinder with safety check valves
Slewing gear
Axial-piston fixed motor, planetary gear, spring-loaded holding brake; switchable between free-slewing and locked
Crane cab
Safety glazing, tilts back 20 deg
Crane control
LICCON2 safe load indicator, two self-centring joysticks

Chassis

Number of axles
4, all axles steered; axles 2, 3 and 4 with planetary gears
Engine model
Liebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96
Gross power
330 kW (449 hp)
Max torque
2,335 Nm
Fuel tank
550 L
Transmission
Automated 12-speed with oil-cooled multi-disc clutch and intarder; two-stage distributor gear with lockable differential
Tyres
385/95 R 25 (14.00 R 25); 445/95 R 25 (16.00 R 25) or 525/80 R 25 (20.5 R 25) optional
Suspension
Hydropneumatic on all axles with automatic levelling, hydraulically lockable
Brakes
Dual-circuit all-wheel air service brake with discs on all axles, spring-loaded parking brake on axles 2-4, exhaust retarder with Liebherr additional braking system, intarder
Steering
Dual-circuit hydraulic power steering with active speed-dependent rear-axle steering and special steering programmes
Top speed (385/95 R 25 tyres; 85 kph with larger tyres)
80 km/h
Minimum driving speed
0.44 km/h (0.48 km/h with larger tyres)
Gradeability (max)
Over 60 % theoretical, all tyre sizes
Electrical system
24 V DC, data-bus technique