Liebherr LTM 1090-4.2
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Liebherr · mobile crane

Liebherr LTM 1090-4.2

Liebherr LTM 1090-4.2, 4-axle 90 t all-terrain crane (Liebherr 6-cyl 330 kW carrier engine, 385/95 R 25 (14.00 R 25) tyres, 11.4-60 m telescopic boom, 8.8 t basic counterweight, 22.5 t maximum with VarioBallast) per Liebherr's multilingual technical data sheet. Letters A-F, H and K are those printed on the sheet's dimension drawing; L-N are assigned here.

UAEGlobal

lifting capacity
99.2 US tons
Main boom length (m, fully extended)
196.9 ft
tip height
249.3 ft
power
449 hp
Liebherr LTM 1090-4.2, side view with dimensions (illustration)13 ft43.9 ft
Liebherr LTM 1090-4.2, front view (illustration)8.4 ft

Dimensions

Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / rear overhang
2.241 / 2.48 / 2.86 / 1.67 / 2.3 m
Tail slewing radius (With the 22.5 t counterweight; 3.77 m with the lower counterweight)
13.2 ft
Outrigger span, longitudinal (7.474 m on the opposite side of the carrier)
24.4 ft
Outrigger span, transverse (max) (6.055 m and 4.81 m part-extended; 2.32-7.3 m with the optional VarioBase)
24 ft
Outrigger pad size
500 x 500 mm

Weight

Gross vehicle weight (On-road driving, 12 t per axle, with 8.8 t counterweight; 40 t (10 t per axle) with none)
105,822 lb
Gross vehicle weight, jobsite driving (With the 22.5 t counterweight, 16 t per axle)
141,096 lb
Axle load, on-road (Per axle, maximum)
26,455 lb
Axle load, jobsite driving (Per axle, maximum)
35,274 lb
Max outrigger reaction (Crane superstructure on the outriggers; 400 kN (41 t) on the smaller support)
119,823 lbf

Crane

Max lifting capacity (At 3 m radius, 11.4 m boom, 22.5 t counterweight, over 360 deg)
99.2 US tons
Main boom length (m, fully extended)
196.9 ft
Main boom length retracted (m)
37.4 ft
Boom sections
7 (1 base section + 6 telescopic sections, TELEMATIK rapid-cycle telescoping)
Max tip height (Largest hoist height of all boom and jib systems, from the cover of the sheet)
249.3 ft
Max radius (Largest radius of all boom and jib systems, from the cover of the sheet)
203.4 ft
Boom elevation angle
Up to 82 deg
Boom elevation time
Approx. 57 s to 82 deg
Boom extension time
Approx. 403 s from 11.4 m to 60 m
Counterweight (Basic counterweight)
9.7 US tons
Max counterweight (13.7 t additional counterweight (option), VarioBallast)
24.8 US tons
Swing-away jib K
9.5 m single, or 9.5-16 m double; 0 / 20 / 40 deg mechanical adjustment; NZK hydraulic 0-40 deg
Assembly jib (Option; 0 / 20 / 40 / 60 deg)
6.6 ft
Hoist 1 single-line speed
0-135 m/min; 17 mm rope, 240 m, 63 kN pull
Hoist 2 single-line speed
0-135 m/min; 17 mm rope, 240 m, 63 kN pull (second hoist is optional)
Slewing speed
0-1.5 rpm, 360 deg
Hook block, 68 t (7 sheaves, 12 lines)
1,676 lb
Hook block, 59.2 t (5 sheaves, 10 lines)
1,168 lb
Hook block, 42.3 t (3 sheaves, 7 lines)
992 lb
Hook block, 18.7 t (1 sheave, 3 lines)
661 lb
Hook block, 6.3 t (1 line)
309 lb
Crane drive
Diesel-hydraulic; axial-piston variable pumps with automatic power control and 1 double gear pump, driven by the carrier engine; open circuits with electrically controlled load sensing, 4 movements at once
Hoist gear
Axial-piston fixed motor, planetary gear in the drum, spring-loaded holding brake
Luffing gear
1 differential cylinder with safety check valves
Slewing gear
Axial-piston fixed motor, planetary gear, spring-loaded holding brake; switchable between free-slewing and locked
Crane cab
Safety glazing, tilts back 20 deg
Crane control
LICCON2 safe load indicator, two self-centring joysticks

Chassis

Number of axles
4, all axles steered; axles 2, 3 and 4 with planetary gears
Engine model
Liebherr 6-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96
Gross power
449 hp
Max torque
1,722 lbf·ft
Fuel tank
145.3 US gal
Transmission
Automated 12-speed with oil-cooled multi-disc clutch and intarder; two-stage distributor gear with lockable differential
Tyres
385/95 R 25 (14.00 R 25); 445/95 R 25 (16.00 R 25) or 525/80 R 25 (20.5 R 25) optional
Suspension
Hydropneumatic on all axles with automatic levelling, hydraulically lockable
Brakes
Dual-circuit all-wheel air service brake with discs on all axles, spring-loaded parking brake on axles 2-4, exhaust retarder with Liebherr additional braking system, intarder
Steering
Dual-circuit hydraulic power steering with active speed-dependent rear-axle steering and special steering programmes
Top speed (385/95 R 25 tyres; 85 kph with larger tyres)
49.7 mph
Minimum driving speed
0.44 km/h (0.48 km/h with larger tyres)
Gradeability (max)
Over 60 % theoretical, all tyre sizes
Electrical system
24 V DC, data-bus technique