Specification sheetIssued 20 November 2026
Tadano · mobile crane
Tadano ATF 220G-5
Tadano Faun ATF 220G-5, 5-axle 220 t all-terrain crane (carrier engine Mercedes-Benz OM 502 LA 390 kW, 14.00 R 25 tyres, 13.2-68 m telescopic boom, 71 t counterweight) per the metric Tadano Faun data sheet with load charts, dealer-hosted copy; the later Tier 4f / Stage IV North American version uses a different carrier engine and is not covered.
UAEGlobal
- lifting capacity
- 220 t
- Main boom length (m, fully extended)
- 68 m
- power
- 390 kW (523 hp)
3.94 m15.1 m
3 mDimensions
- Boom head to front of carrier
- 1.6 m
- Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / rear overhang
- 2.536 / 2.7 / 1.65 / 2.44 / 1.7 / 2.399 m
- Slewing centre to rear of counterweight
- 4.949 m
- Tail slewing radius (71 t counterweight; the dimension drawing shows R 4.98 m and R 4.217 m)
- 4.98 m
- Outrigger span, longitudinal (8.9755 m on the other side of the slewing centre; the equipment text quotes 9.01 m)
- 9.045 m
- Outrigger span, transverse (max) (Intermediate 5.6 m)
- 8.3 m
Weight
- Gross vehicle weight (Road travel, 12 t per axle on all five axles)
- 60,000 kg
- Counterweight versions
- 12 t / 23.5 t / 35 t / 47 t / 71 t total, divisible
Crane
- Max lifting capacity (At 2.5 m radius, 13.2 m boom over the rear, with additional lifting equipment, 71 t counterweight; 180 t at 3 m)
- 220 t
- Main boom length (m, fully extended)
- 68 m
- Main boom length retracted (m)
- 13.2 m
- Boom sections
- 7 (1 base section + 6 telescopic sections, 1 telescopic cylinder)
- Counterweight (Total, divisible; 12 t, 23.5 t, 35 t and 47 t variants)
- 71 t
- Boom extensions
- 13.2 m to 37.2 m; heavy-duty jib 5.4 m (optional)
- Boom elevation angle
- -1.5 to +84 deg
- Boom elevation time
- Approx. 50 s
- Boom extension time
- Approx. 500 s from 13.2 m to 68 m
- Hoist 1 single-line speed
- 0-128 m/min; 21 mm rope, 320 m, 98 kN pull
- Hoist 2 single-line speed
- 0-128 m/min; 21 mm rope, 320 m, 98 kN pull (second hoist is optional)
- Slewing speed
- 0-1.2 rpm, 360 deg
- Hook block, 160 t (9 sheaves, 19 lines; 125 t 1,350 kg (7 / 15), 80 t 1,150 kg (5 / 11), 63 t 850 kg (3 / 7), 25 t 450 kg (1 / 3), 10 t 300 kg (1 line))
- 1,600 kg
- Superstructure engine model
- Mercedes-Benz OM 906 LA, 6-cyl diesel, Euromot IIIA / EPA III, water-cooled
- Superstructure engine power (At 1,800 rpm; torque 750 Nm at 1,200-1,600 rpm; fuel tank 250 L)
- 138 kW (188 PS)
- Hydraulic system
- Diesel-hydraulic, 3 circuits: 1 double axial piston pump, 1 axial piston pump, 1 gear pump
Chassis
- Number of axles
- 5; axles 1, 2, 4 and 5 steered, axle 3 not steered, not driven and liftable; drive 10x8, 10x6 optional
- Engine model
- Mercedes-Benz OM 502 LA, 8-cyl diesel, Euromot IIIA / EPA III, water-cooled
- Net power (At 1,800 rpm, rated to 80/1269/EEC (530 PS))
- 390 kW (523 hp)
- Max torque (At 1,300 rpm)
- 2,400 Nm
- Fuel tank (Carrier)
- 530 L
- Transmission
- ZF AS-Tronic 16 AS 2602, 16 forward / 2 reverse, electro-pneumatic dry clutch, two-speed transfer case
- Tyres
- 14.00 R 25 (385/95 R 25); 16.00 R 25 and 20.5 R 25 optional
- Suspension
- Hydropneumatic with level control
- Brakes
- Dual-circuit air brake, spring-brake parking brake on axles 2, 4 and 5, intarder and exhaust flap brake as continuous brakes
- Top speed (14.00 R 25 and 16.00 R 25 tyres)
- 85 km/h
- Gradeability (max)
- 52 % on-road range, 69 % off-road range (14.00 R 25); 47 % / 61 % with 16.00 R 25
- Steering
- ZF-Servocom dual-circuit hydraulic steering with emergency steering pump; front two axles steered mechanically with hydraulic assist; automatic steering of axle 4 up to 25 kph and axle 5 up to 50 kph
- Electrical system
- 24 V DC, 2 batteries; CAN-bus with Faun CSS self-diagnosis