Tadano ATF 220G-5
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Tadano · mobile crane

Tadano ATF 220G-5

Tadano Faun ATF 220G-5, 5-axle 220 t all-terrain crane (carrier engine Mercedes-Benz OM 502 LA 390 kW, 14.00 R 25 tyres, 13.2-68 m telescopic boom, 71 t counterweight) per the metric Tadano Faun data sheet with load charts, dealer-hosted copy; the later Tier 4f / Stage IV North American version uses a different carrier engine and is not covered.

UAEGlobal

lifting capacity
242.5 US tons
Main boom length (m, fully extended)
223 ft 1 in
power
523 hp
Tadano ATF 220G-5, side view with dimensions (illustration)12.9 ft49.6 ft
Tadano ATF 220G-5, front view (illustration)9.8 ft

Dimensions

Boom head to front of carrier
5 ft 3 in
Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / rear overhang
2.536 / 2.7 / 1.65 / 2.44 / 1.7 / 2.399 m
Slewing centre to rear of counterweight
16 ft 3 in
Tail slewing radius (71 t counterweight; the dimension drawing shows R 4.98 m and R 4.217 m)
16 ft 4 in
Outrigger span, longitudinal (8.9755 m on the other side of the slewing centre; the equipment text quotes 9.01 m)
29 ft 8 in
Outrigger span, transverse (max) (Intermediate 5.6 m)
27 ft 3 in

Weight

Gross vehicle weight (Road travel, 12 t per axle on all five axles)
132,277 lb
Counterweight versions
12 t / 23.5 t / 35 t / 47 t / 71 t total, divisible

Crane

Max lifting capacity (At 2.5 m radius, 13.2 m boom over the rear, with additional lifting equipment, 71 t counterweight; 180 t at 3 m)
242.5 US tons
Main boom length (m, fully extended)
223 ft 1 in
Main boom length retracted (m)
43 ft 4 in
Boom sections
7 (1 base section + 6 telescopic sections, 1 telescopic cylinder)
Counterweight (Total, divisible; 12 t, 23.5 t, 35 t and 47 t variants)
78.3 US tons
Boom extensions
13.2 m to 37.2 m; heavy-duty jib 5.4 m (optional)
Boom elevation angle
-1.5 to +84 deg
Boom elevation time
Approx. 50 s
Boom extension time
Approx. 500 s from 13.2 m to 68 m
Hoist 1 single-line speed
0-128 m/min; 21 mm rope, 320 m, 98 kN pull
Hoist 2 single-line speed
0-128 m/min; 21 mm rope, 320 m, 98 kN pull (second hoist is optional)
Slewing speed
0-1.2 rpm, 360 deg
Hook block, 160 t (9 sheaves, 19 lines; 125 t 1,350 kg (7 / 15), 80 t 1,150 kg (5 / 11), 63 t 850 kg (3 / 7), 25 t 450 kg (1 / 3), 10 t 300 kg (1 line))
3,527 lb
Superstructure engine model
Mercedes-Benz OM 906 LA, 6-cyl diesel, Euromot IIIA / EPA III, water-cooled
Superstructure engine power (At 1,800 rpm; torque 750 Nm at 1,200-1,600 rpm; fuel tank 250 L)
188 PS
Hydraulic system
Diesel-hydraulic, 3 circuits: 1 double axial piston pump, 1 axial piston pump, 1 gear pump

Chassis

Number of axles
5; axles 1, 2, 4 and 5 steered, axle 3 not steered, not driven and liftable; drive 10x8, 10x6 optional
Engine model
Mercedes-Benz OM 502 LA, 8-cyl diesel, Euromot IIIA / EPA III, water-cooled
Net power (At 1,800 rpm, rated to 80/1269/EEC (530 PS))
523 hp
Max torque (At 1,300 rpm)
1,770 lbf-ft
Fuel tank (Carrier)
140 gal
Transmission
ZF AS-Tronic 16 AS 2602, 16 forward / 2 reverse, electro-pneumatic dry clutch, two-speed transfer case
Tyres
14.00 R 25 (385/95 R 25); 16.00 R 25 and 20.5 R 25 optional
Suspension
Hydropneumatic with level control
Brakes
Dual-circuit air brake, spring-brake parking brake on axles 2, 4 and 5, intarder and exhaust flap brake as continuous brakes
Top speed (14.00 R 25 and 16.00 R 25 tyres)
52.8 mph
Gradeability (max)
52 % on-road range, 69 % off-road range (14.00 R 25); 47 % / 61 % with 16.00 R 25
Steering
ZF-Servocom dual-circuit hydraulic steering with emergency steering pump; front two axles steered mechanically with hydraulic assist; automatic steering of axle 4 up to 25 kph and axle 5 up to 50 kph
Electrical system
24 V DC, 2 batteries; CAN-bus with Faun CSS self-diagnosis