The SANY STC1600T7 is ahead on: more power, more torque, faster. The XCMG QY100K5C is ahead on: bigger fuel tank, narrower to transport, lower to transport.
Below, every figure both makers publish sits side by side, with the SANY STC1600T7 and the XCMG QY100K5C drawn to the same scale from their dimension drawings.
Overall height3.995 mThe side drawing on p.16 prints 4,000 mm3.886 m
Ground clearance (minimum)0.31 m0.26 m
Boom head to front of carrier2.52 m2.248 mQixing cab; 2.263 m with the XCMG Automobile cab
Front overhang2.795 m2.54 mQixing cab; 2.525 m with the XCMG Automobile cab
Rear overhang2.009 m2.517 m
Approach angle17°11°18 deg with the front protective device removed
Angle of departure17°11°
Tail slewing radius4.5 m4.4 mAt the counterweight; 4.294 m at the auxiliary winch
Outrigger span, longitudinal7.55 mThe plan view splits it 4,185 mm + 3,365 mm either side of the slewing centre6.6 m
Outrigger span, transverse (max)8.1 m7.9 m5.6 m intermediate
Carrier length13.674 mest.Estimate: front overhang 2.795 m + axle spacings 1.52 / 4.35 / 1.5 / 1.5 m + rear overhang 2.009 m (front bumper to rear of frame)12.407 mest.Estimate: front overhang 2.54 m + axle spacings 1.5 / 4.5 / 1.35 m + rear overhang 2.517 m (front bumper to rear of frame)
Weight
Gross vehicle weight54,600 kgTravel configuration without jib, jib bracket, spare tyre, hooks, auxiliary winch, outrigger floats and counterweight49,600 kgTravel configuration: jib carried; counterweight, 80 t and 7 t hook blocks, spare tyre and single top removed
Counterweight52 tMaximum; 12 combinations 1.3 / 11 / 13.3 / 17.3 / 21.3 / 23 / 27 / 31 / 31.3 / 41 / 42.3 / 52 t, fitted by remote control; the lifting cylinder can shift 550 mm fore and aft to add moment31 tCombinations of 31 / 24.6 / 19.8 / 19.6 / 17.6 / 15 / 14.8 / 12.8 / 10 / 8 / 7 / 2 t
Crane
Max lifting capacity160 tAt 2.5 m minimum rated radius; ratings above 98 t need a higher rope reeving and the 100-130 t hook100 tAt 3 m radius (minimum rated radius)
Main boom length (m, fully extended)75.5 m50.5 m
Main boom length retracted (m)14.1 m12.95 mSpec text gives 13 m
Main boom + jib length93 m68 m
Boom sections7, oval cross-section, single-cylinder pin telescoping with one-key extension5 (U-section, two cylinders plus ropes)
Max tip height76 mFully extended main boom50.5 mHoisting height, fully extended boom
Max tip height with jib93 m66.6 mFully extended boom plus jib
Jib17.5 m fixed jib, optional 9.5 m extension, offsets 0 / 15 / 30 deg2-section lattice fixed jib, 10.5 m / 17.5 m, offsets 0 / 15 / 30 deg
Max load moment, basic boom5,145 kN.m3,557 kN.m
Max load moment, fully extended boom2,234 kN.m2,501 kN.m
Max load moment, boom + jib1,019 kN.m1,628 kN.m
Boom elevation angle0 to 80 deg-0.5 to 81 deg
Main winch single-line speed0-135 m/min, no load0-135 m/min (4th layer, no load)
Auxiliary winch single-line speed0-135 m/min, no load (optional winch)0-80 m/min (4th layer, no load)
Max single line pull7.5 tBoth winches6.8 tBoth winches
Hook block weight735 kg75 t double-eye block, 10 parts of line (standard); 8 t block 170 kg; optional 50 t 480 kg (6 parts) and 100 t 1,030 kg (14 parts)700 kg80 t block, 12 parts of line; 55 t block 470 kg (8 parts), 7 t block 210 kg (1 part)
Outrigger extend / retract timeBeams out 30 s / in 20 s; jacks out 50 s / in 60 sBeams out 40 s / in 30 s; jacks out 50 s / in 40 s
Tyres385/95R25 on all axles385/95R25 front (axles 1-2, single); 12.00R24 / 325/95R24 rear (axles 3-4, dual); 12 tyres and 1 spare
SuspensionIndependent leaf springs front; oscillating leaf-spring balance suspension centre and rearLeaf springs front, rubber suspension rear
BrakesDual-circuit air drum brakes with ABS on all axles; spring parking brake on axles 2-5; exhaust brakeDual-circuit air service brake on all wheels, spring parking brake on axles 2-4, exhaust and in-cylinder retarder
Top speed85 km/h80 km/h80 km/h or more; minimum stable speed 2.5-3 km/h
Side views measured off each maker's dimension drawing, front edges and ground lined up.
SANY STC1600T7XCMG QY100K5CSame scale, front edges and ground lined up.
SANY STC1600T7 vs XCMG QY100K5C: questions
Which has more power, the SANY STC1600T7 or XCMG QY100K5C?+
The SANY STC1600T7: SANY STC1600T7 316 kW (424 hp), XCMG QY100K5C 294 kW (394 hp) (gross power), a 7% difference.
Which has the bigger fuel tank, the SANY STC1600T7 or XCMG QY100K5C?+
The XCMG QY100K5C: SANY STC1600T7 450 L, XCMG QY100K5C 470 L (fuel tank), a 4% difference.
Which is narrower to transport, the SANY STC1600T7 or XCMG QY100K5C?+
The XCMG QY100K5C: SANY STC1600T7 3 m, XCMG QY100K5C 2.8 m (overall width), a 7% difference.
Where do these figures come from?+
Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.
Can I rent or buy these machines in the UAE?+
Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.
We use necessary cookies to run the site. Optional cookies help with analytics, personalization, and services like one-tap sign in. You can accept all, reject optional cookies, or customize your preferences.