XCMG QY100K5C
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

XCMG · mobile crane

XCMG QY100K5C

XCMG QY100K5C 100 t truck crane (4 axles, 5-section 13-50.5 m boom, Weichai WP10H400E62 China VI engine, 31 t counterweight) per XCMG's bilingual technical specification, 1st edition May 2023, marketplace-hosted copy. Other QY100K variants (K7C, K6C, older QY100K) have different booms and engines and are not covered.

UAEGlobal

lifting capacity
100 t
Main boom length (m, fully extended)
50.5 m
tip height
50.5 m
power
294 kW (394 hp)
XCMG QY100K5C, side view with dimensions (illustration)3.89 m15 m
XCMG QY100K5C, front view (illustration)2.8 m

Dimensions

Axle spacing, axles 1-2 / 2-3 / 3-4
1.5 / 4.5 / 1.35 m
Track, axles 1-2 / 3-4
2.4 / 2.063 m
Front extension (boom head to cab front) (Qixing cab; 2.263 m with the XCMG Automobile cab)
2.248 m
Front overhang (Qixing cab; 2.525 m with the XCMG Automobile cab)
2.54 m
Rear overhang
2.517 m
Rear extension (beyond frame)
0.33 m
Tail slewing radius (At the counterweight; 4.294 m at the auxiliary winch)
4.4 m
Outrigger span, longitudinal
6.6 m
Outrigger span, transverse (max) (5.6 m intermediate)
7.9 m
Outrigger float diameter
0.45 m
Carrier length (Estimate: front overhang 2.54 m + axle spacings 1.5 / 4.5 / 1.35 m + rear overhang 2.517 m (front bumper to rear of frame))
12.407 mest.

Weight

Gross vehicle weight (Travel configuration: jib carried; counterweight, 80 t and 7 t hook blocks, spare tyre and single top removed)
49,600 kg
Axle load, axles 1 / 2 / 3 / 4
11.8 / 11.8 / 13 / 13 t
Gross vehicle weight, short-distance transfer (With 7 t + 9.6 t + 8 t of counterweight carried; axle loads 11.5 / 11.5 / 25.65 / 25.65 t)
74,300 kg
Max outrigger reaction (At maximum lifting load)
827 kN

Crane

Max lifting capacity (At 3 m radius (minimum rated radius))
100 t
Main boom length (m, fully extended)
50.5 m
Main boom length retracted (m) (Spec text gives 13 m)
12.95 m
Main boom + jib length
68 m
Boom sections
5 (U-section, two cylinders plus ropes)
Max tip height (Hoisting height, fully extended boom)
50.5 m
Max tip height with jib (Fully extended boom plus jib)
66.6 m
Jib
2-section lattice fixed jib, 10.5 m / 17.5 m, offsets 0 / 15 / 30 deg
Single top (Maximum load; performance as boom)
6.5 t
Counterweight (Combinations of 31 / 24.6 / 19.8 / 19.6 / 17.6 / 15 / 14.8 / 12.8 / 10 / 8 / 7 / 2 t)
31 t
Max load moment, basic boom
3,557 kN.m
Max load moment, fully extended boom
2,501 kN.m
Max load moment, boom + jib
1,628 kN.m
Boom elevation angle
-0.5 to 81 deg
Boom raising time
-0.5 to 81 deg in approx. 55 s
Boom extension time
13 m to 50.5 m in approx. 135 s
Main winch single-line speed
0-135 m/min (4th layer, no load)
Auxiliary winch single-line speed
0-80 m/min (4th layer, no load)
Max single line pull (Both winches)
6.8 t
Main winch rope
20 mm x 260 m
Auxiliary winch rope
20 mm x 145 m
Slewing speed
0-1.8 rpm, 360 deg continuous
Hook block weight (80 t block, 12 parts of line; 55 t block 470 kg (8 parts), 7 t block 210 kg (1 part))
700 kg
Outrigger extend / retract time
Beams out 40 s / in 30 s; jacks out 50 s / in 40 s
Hydraulic tank
1,164 L

Chassis

Number of axles
4 (8x4, axles 1-2 steered, axles 3-4 driven)
Engine model
Weichai WP10H400E62, 6-cyl in-line, China VI, urea SCR
Gross power (Rated at 1,900 rpm; max net power 289 kW at 1,900 rpm)
294 kW (394 hp)
Max torque (At 1,200-1,300 rpm; max reference torque 2,067 Nm)
1,900 Nm
Fuel tank
470 L
AdBlue tank
30 L
Transmission
Shaanxi Fast manual, 10 forward / 2 reverse
Tyres
385/95R25 front (axles 1-2, single); 12.00R24 / 325/95R24 rear (axles 3-4, dual); 12 tyres and 1 spare
Suspension
Leaf springs front, rubber suspension rear
Brakes
Dual-circuit air service brake on all wheels, spring parking brake on axles 2-4, exhaust and in-cylinder retarder
Top speed (80 km/h or more; minimum stable speed 2.5-3 km/h)
80 km/h
Gradeability (max)
47 %
Fuel consumption per 100 km
44 L