EF Logo

excavatormade by John DeereUAE, Global

John Deere 210 P-TierSpecs, weight and dimensions

Weight
23.2 t
23,247 kg
Dig depth
6.67 m
Est. new price
AED 680k-1.1M

Quick answer

The John Deere 210 P-Tier is a 23.2-tonne excavator with a John Deere PowerTech PVS 6.8L (6068HT106) engine rated at 119 kW (159 hp). It digs to 6.67 m, reaches 9.75 m, dumps at up to 7.18 m and works a 0.91 m³ bucket. It suits digging foundations and trenches and loading dump trucks. Its rivals include the Cat 320 (21.3 t) and the Cat 323 (22.9 t).

John Deere 210 P-Tier (illustration)

How much does a John Deere 210 P-Tier weigh?

The John Deere 210 P-Tier weighs 23.2 tonnes (23,247 kg, 51,251 lb) in working order, with fuel, operator and standard attachment. That is 9% heavier than the Cat 320 (21.3 t) and 2% heavier than the Cat 323 (22.9 t). It puts 39.3 kPa of pressure on the ground. The figures are from John Deere 210 P-Tier excavator spec sheet (ME210PAU).

What engine is in the John Deere 210 P-Tier?

The John Deere 210 P-Tier has a John Deere PowerTech PVS 6.8L (6068HT106) engine rated at 119 kW (159 hp) net, ISO 9249, at 2,000 rpm. It displaces 6.8 L (415 in3). Emissions: EPA Final Tier 4 / EU Stage IV. The fuel tank holds 403 L (106.5 gal) and the engine takes 20.8 L (5.5 gal) of oil.

How deep can a John Deere 210 P-Tier dig?

The John Deere 210 P-Tier digs to 6.67 m, reaches 9.75 m, dumps at up to 7.18 m and works a 0.91 m³ bucket. In imperial units the digging depth is 21' 11". On the same row of their sheets, the Cat 320 shows 6.72 m and the Cat 323 shows 6.73 m.

What are the John Deere 210 P-Tier dimensions?

The John Deere 210 P-Tier is 9.66 m (31 ft 8 in) long, 3.09 m (10 ft 2 in) wide and 2.95 m (9 ft 8 in) high. As it stands it is too big for the door of a standard shipping container. The Cat 320 is 9.53 m long, 2.98 m wide and 2.96 m high.

John Deere 210 P-Tier vs Cat 320: what is the difference?

The John Deere 210 P-Tier is 9% heavier than the Cat 320: 23.2 t against 21.3 t. The John Deere 210 P-Tier has more power (119 kW against 117 kW), dumps higher (7.18 m against 6.49 m) and has more digging or pushing force (158 kN against 150 kN). Both sets of figures are the makers’ own, for the builds on our sheets.

John Deere 210 P-Tier vs Cat 320, every figure

These figures are for the 210 P-Tier. The 210G LC is not covered here and has figures of its own, so check the serial plate before using these for one.

John Deere 210 P-Tier dimensions

John Deere 210 P-Tier, side view with dimensions (illustration)2.95 m3.66 m9.66 m
Side view
John Deere 210 P-Tier, front view (illustration)3.09 m
Front view
Overall height
2.95 m
Track on ground
3.66 m
Overall length
9.66 m
Overall width
3.09 m

Illustration; figures from the maker's sheet.

How big is the John Deere 210 P-Tier?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

John Deere 210 P-Tier drawn to scale beside a person and a pickup truck. The John Deere 210 P-Tier is 9.66 m long - about 1.8 pickup trucks - and 2.95 m tall, 1.7 times a person's height.John Deere 210 P-Tier9.66 × 2.95 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The John Deere 210 P-Tier is 9.66 m long - about 1.8 pickup trucks - and 2.95 m tall, 1.7 times a person's height.

John Deere 210 P-Tier specifications

Figures are the maker's unless marked: est. is our estimate, and any figure from another site names it. Each links to where it came from. Sheet last updated 17 November 2026.

63 figures in 8 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length9.66 m[1] p.8
Overall height (to top of boom)3.01 m[1] p.8
Tail swing radius2.89 mPrinted as rear-end length / swing radius[1] p.8
Track length on ground3.66 mPrinted as distance between idler and sprocket centreline[1] p.8
Track length4.47 mPrinted as undercarriage length[1] p.8
Ground clearance, counterweight1.03 m[1] p.8
Dimensions, part 2 of 2
FigureValue (metric)Source
Overall width of upperstructure2.71 m[1] p.8
Overall height (to top of cab)2.95 m[1] p.8
Shoe width0.7 mTriple semi-grouser shoes, 600, 700 or 800 mm; 700 mm shown[1] p.8
Track gauge2.39 m[1] p.8
Ground clearance (minimum)0.45 m[1] p.8
Overall width3.09 mWith 700 mm shoes; 2.99 m with 600 mm, 3.19 m with 800 mm[1] p.8

Working range

Working range, part 1 of 2
FigureValue (metric)Source
Max digging reach9.92 m[1] p.7
Max reach at ground level9.75 m[1] p.7
Max digging depth6.67 m[1] p.7
Max digging depth (8' level)6.5 m2.44 m flat bottom[1] p.7
Working range, part 2 of 2
FigureValue (metric)Source
Max digging height10.04 mPrinted as maximum cutting height[1] p.7
Max dumping height7.18 m[1] p.7
Min swing radius3.18 m[1] p.7
Max vertical wall digging depth5.99 m[1] p.7

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Operating weight23,247 kg700 mm shoes, standard counterweight and boom, 0.91 m3 bucket, 2.91 m arm, full fuel tank, 79 kg operator. 600 mm: 22,857 kg; 800 mm: 23,560 kg; with heavy counterweight and HD boom: 23,557 / 23,947 / 24,260 kg for 600 / 700 / 800 mm[1] p.7
Counterweight4,250 kgStandard; heavy counterweight 4,850 kg[1] p.7
Ground pressure39.3 kPa700 mm shoes, standard counterweight; 600 mm 44.4 kPa, 800 mm 34.4 kPa[1] p.7
Undercarriage weight7,725 kgLC undercarriage with 700 mm triple semi-grouser shoes; 600 mm 7,335 kg, 800 mm 8,038 kg[1] p.7
Weight, part 2 of 2
FigureValue (metric)Source
Boom weight1,731 kgOne-piece boom with arm cylinder; HD boom 1,781 kg[1] p.7
Arm weight1,001 kg2.91 m arm with bucket cylinder and linkage[1] p.7
Boom cylinders weight354 kgPair of boom-lift cylinders[1] p.7
Bucket weight886 kg1,065 mm general-purpose bucket[1] p.7

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Bucket capacity0.91 m³1,065 mm (42 in) general-purpose bucket, SAE heaped[1] p.7
Bucket digging force158 kNISO, with power boost; SAE 141 kN (31,698 lbf)[1] p.7
Arm digging force114 kNISO, 2.91 m arm; SAE 110 kN (24,729 lbf)[1] p.7
Swing speed13.3 rpm[1] p.7
Max swing torque68,900 Nm[1] p.7
Performance, part 2 of 2
FigureValue (metric)Source
Travel speed (high)5.5 km/h[1] p.6
Travel speed (low)3.5 km/h[1] p.6
Max drawbar pull20,700 kgfTurtle mode[1] p.6
Off-level capacity35°70% slope[1] p.6

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelJohn Deere PowerTech PVS 6.8L (6068HT106)[1] p.6
EmissionsEPA Final Tier 4 / EU Stage IV[1] p.6
Cylinders6[1] p.6
Displacement6.8 L[1] p.6
Bore106 mmest.Estimate: bore of Deere's PowerTech PVS 6.8L (6068) engine family, from the 6068HFC08 PVS spec sheet; the excavator sheet does not print it[3]
Engine, part 2 of 2
FigureValue (metric)Source
Stroke127 mmest.Estimate: stroke of Deere's PowerTech PVS 6.8L (6068) engine family, from the 6068HFC08 PVS spec sheet; the excavator sheet does not print it[3]
Net power119 kW (159 hp)ISO 9249, at 2,000 rpm[1] p.6
AspirationTurbocharged, air-to-air charge-air cooler[1] p.6
CoolingReversing electric variable-speed fan drive[1] p.6

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Pump flow2 x 212 L/minTwo variable-displacement axial-piston pumps, open-centre load-sensing[1] p.6
Max pressure343 barImplement circuit, 34,300 kPa[1] p.6
Max pressure, power boost380 bar38,000 kPa[1] p.6
Max pressure, travel355 bar35,500 kPa[1] p.6
Max pressure, swing333 bar33,300 kPa[1] p.6
Hydraulics, part 2 of 2
FigureValue (metric)Source
Pilot pump flow30 L/minGear pump, setting 4,000 kPa (580 psi)[1] p.6
Boom cylinders (2)120 mm bore, 85 mm rod, 1,260 mm stroke[1] p.6
Arm cylinder135 mm bore, 95 mm rod, 1,475 mm stroke[1] p.6
Bucket cylinder115 mm bore, 80 mm rod, 1,060 mm stroke[1] p.6

Undercarriage

Undercarriage, part 1 of 2
FigureValue (metric)Source
Track rollers (each side)8[1] p.6
Carrier rollers (each side)2[1] p.6
Track shoes (each side)49Triple semi-grouser[1] p.6
Undercarriage, part 2 of 2
FigureValue (metric)Source
Track adjustmentHydraulic[1] p.6
Track chainSealed and lubricated, centre guides[1] p.6

Electrical

Electrical
FigureValue (metric)Source
Batteries2 x 12 V, 950 CCA[1] p.6
Alternator300 A[1] p.6
Work lights2 LED (one on left of boom, one on frame)[1] p.6

Build: John Deere 210 P-Tier (the long-undercarriage 21 t excavator that replaced the 210G LC), figures from Deere's 210 P-Tier spec sheet ME210PAU for the 2.91 m arm, 700 mm triple semi-grouser shoes, standard boom and standard 4,250 kg counterweight. Engine is the Final Tier 4 / Stage IV PowerTech PVS 6.8L; the earlier 210G LC has a near-identical layout.

  1. [1]John Deere 210 P-Tier excavator spec sheet (ME210PAU)
  2. [2]John Deere 210G / 210G LC brochure (previous generation, used only to record differences)
  3. [3]John Deere 6068HFC08 PowerTech PVS 6.8L engine spec sheet (deere.ca) - 6068 engine family bore and stroke

John Deere 210 P-Tier service

What each system holds and when John Deere says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
403 L106.5 gal
Cooling system
35.4 L9.4 gal
Engine oil
20.8 L5.5 gal
Swing drive
6.2 L6.6 qt
Final drive (each)
7.8 L8.2 qt
Pump drive
1 L1.1 qt
Hydraulic system, with tank
240 L63.4 gal
Hydraulic tank
135 L35.7 gal
DEF tank
26.6 L7.0 gal

John Deere 210 P-Tier against its rivals

The excavators nearest in weight from other makers, figure by figure, each shown at the same scale.

John Deere 210 P-Tier, Cat 320, Cat 323, Hyundai HX210AL: specifications side by side
FigureJohn Deere 210 P-Tierthis pageCat 320 specsCat 323 specsHyundai HX210AL specs
Operating weight23,247 kg21,300 kg22,900 kg22,890 kg
Net power119 kW (159 hp)117 kW (157 hp)117 kW (157 hp)127 kW (170 hp)
Max digging depth6.67 m6.72 m6.73 m6.64 m
Max digging reach9.92 mnot on its sheetnot on its sheet9.96 m
Max dumping height7.18 m6.49 m6.48 m6.9 m
Bucket capacity0.91 m³1.19 m³1.3 m³0.92 m³
Bucket digging force158 kN150 kN140 kN133 kN
Pump flownot on its sheet429 L/min429 L/min468 L/min
Fuel tank403 L345 L345 L400 L
Every figureFull sheetJohn Deere 210 P-Tier vs Cat 320

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the John Deere 210 P-Tier if you need a higher dump (7.18 m), more digging force (158 kN) and a bigger fuel tank (403 L).
  • Pick the Cat 320 if the lightest machine matters: at 21.3 t it weighs the least of the 4, and it leads no other figure here.
  • Pick the Cat 323 if you need a deeper dig (6.73 m) and a bigger bucket (1.3 m³).
  • Pick the Hyundai HX210AL if you need more power (127 kW), longer reach (9.96 m) and more hydraulic flow (468 L/min).

John Deere 210 P-Tier prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new John Deere 210 P-Tier costs about AED 680,000 to AED 1,100,000, base machine before options, freight and tax - an estimate from published estimates, checked November 2026. Sources: equipbook.ai, m.fastline.com.

No John Deere 210 P-Tier is listed in the UAE on EquipmentsFinder right now. The prices below are for all excavators, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 28

AED 1,225 /day

No priced John Deere 210 P-Tier for hire yet: this is all excavators

Low AED 800High AED 1,800

No John Deere 210 P-Tier for rent listed right now.

Request a John Deere 210 P-Tier

Who is asking for excavators in the UAE

Contractors posted 48 requests for excavators on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (28), Abu Dhabi (11) and Fujairah (3). Requests name a kind of machine, not a model, so this counts every excavator, the John Deere 210 P-Tier among them.

Requests, last 12 months
48
For Dubai
28
For Abu Dhabi
11
  • 20 Ton Wheel Excavator Required For Purchase19 November 2026
  • 20 ton Tracked excavator pre-fitted with hydraulic vibratory roller Required For RentAbu Dhabi / 17 November 2026
  • 85 Ton Excavator with 26m Boom Required For RentDubai / 16 November 2026

Open excavator requests on the Inquiry BoardPost a request for a John Deere 210 P-Tier

Does a John Deere 210 P-Tier fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the John Deere 210 P-Tier is 3.09 m wide against a 2.34 m door opening and 2.95 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
9.66 m
Width
3.09 m
Height
2.95 m
Weight
23.2 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a John Deere 210 P-Tier

For the people who run one: codes, charts and calculators that fit an excavator.

Same class: 20 ton excavators

20 ton excavators with an operating weight of 17 to 25 t, lightest first. The John Deere 210 P-Tier is 17 of 17; every figure is the maker's.

  1. 9Cat 32021.3 t
  2. 10Zoomlion ZE215E21.7 t
  3. 11Develon DX225LCA-7M21.7 t
  4. 12Volvo EC22021.7 t
  5. 13SANY SY215C21.9 t
  6. 14JCB JS220 LC21.9 t
  7. 15Hyundai HX210AL22.9 t
  8. 16Cat 32322.9 t
  9. 17John Deere 210 P-TierThis page23.2 t

Showing 9 to 17 of 17, the machines nearest the John Deere 210 P-Tier by operating weight.

Popular John Deere excavator models

John Deere 210 P-Tier fault codes and serial number

All John Deere fault codesFind the year from a John Deere serial number

More John Deere 210 P-Tier questions

How much horsepower does the John Deere 210 P-Tier have?

159 hp (119 kW) net, ISO 9249, at 2,000 rpm.

What size bucket does a John Deere 210 P-Tier take?

0.91 m³ (1.19 yd3) is the bucket the maker quotes its figures with; other sizes fit.

How far can a John Deere 210 P-Tier reach?

Its maximum reach at ground level is 9.75 m (32' 0").

How tall is a John Deere 210 P-Tier?

2.95 m (9 ft 8 in) overall.

How wide is a John Deere 210 P-Tier?

3.09 m (10 ft 2 in) overall.

How high can a John Deere 210 P-Tier dig?

Its maximum digging height is 10.04 m (32' 11"), printed as maximum cutting height.

What is the tail swing radius of a John Deere 210 P-Tier?

2.89 m (9' 6").

What is the hydraulic flow of a John Deere 210 P-Tier?

2 x 212 L/min.

What are the John Deere 210 P-Tier's main competitors?

The machines nearest it in size are the Cat 323, the Hyundai HX210AL and the JCB JS220 LC. Each has a side-by-side comparison on EquipmentsFinder.

Is the John Deere 210 P-Tier sold in the UAE?

Yes. The John Deere 210 P-Tier is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a John Deere 210 P-Tier used for?

A crawler excavator: a digging arm and bucket on a cab that turns all the way round, on tracks for grip and stability. Typical jobs: digging foundations and trenches, loading dump trucks, demolition with a breaker, lifting pipes into trenches.

Embed this spec card

The John Deere 210 P-Tier's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/john-deere-210g" title="John Deere 210 P-Tier specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/john-deere-210g">John Deere 210 P-Tier specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a John Deere 210 P-Tier on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.