EF Logo

Cat 320 specs

digging depth
6.72 m
net power
117 kW (157 hp)
operating weight
21,300 kg
bucket capacity
1.19 m³

Cat 320 dimensions

Spec sheet PDF
Side
9106
Rear
Cat 320 dimensions
LetterDimensionMetric and imperial
1Overall height (to top of cab)2.96 m9.7 ft
2Overall length9.53 m31.3 ft
4Tail swing radius2.83 m9.3 ft
5Ground clearance, counterweight1.05 m3.4 ft
6Ground clearance (minimum)0.47 m1.5 ft
7Track length4.45 m14.7 ft
8Track length on ground3.65 m12 ft
9Track gauge2.38 m7.8 ft
10Overall width2.98 m9.8 ft

Cat 320 specifications

Cat 320 (next generation, Tier 3 / Stage IIIA-equivalent build for less-regulated markets, C7.1 engine, build 07G) as sold by Al-Bahar in the UAE/GCC; dimensions and working ranges for the 5.7 m HD Reach boom, 2.9 m HD Reach stick and 1.19 m³ HD bucket.

30 figures in 5 groups

Dimensions

Handrail height
2.95 m
Shoe width
0.6 m

Performance

Max digging depth
6.72 m
Max reach at ground level
9.86 m
Max digging height
9.37 m
Max dumping height
6.49 m
Min loading height
2.17 m
Max depth cut for 2,440 mm level bottom
6.55 m
Max vertical wall digging depth
5.19 m
Bucket capacity
1.19 m³HD bucket
Bucket digging force
150 kN
Arm digging force
106 kN
Swing speed
11.3 r/min
Max swing torque
82 kN·m

Weight

Operating weight
21,300 kg

Engine

Engine model
Cat C7.1
Emissions
Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA
Net power
117 kW (157 hp)ISO 9249, at 1,800 rpm
Net power (DIN)
159 hp (metric)ISO 9249 (DIN)
Gross power
118 kW (158 hp)ISO 14396
Gross power (DIN)
160 hp (metric)ISO 14396 (DIN)
Bore
105 mm
Stroke
135 mm
Displacement
7 L
Biodiesel capability
Up to B20

Hydraulics

Pump flow
429 L/minMain system, maximum flow
Max pressure
35 000 kPaEquipment
Max pressure, equipment (lift mode)
38 000 kPa
Max pressure, travel
34 300 kPa
Max pressure, swing
27 500 kPa

Source: Cat 320 Hydraulic Excavator (Tier 3) brochure AEXQ2332-09 (2024, build 07G)

Cat 320 service

What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Loading the 3D machine...

Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is

  1. Engine oil
    25 L
    Engine oil and filter, change every
    1,000 hours

    Fluid: Cat DEO-ULS SAE 15W-40 (Cat grade for -10 to 50 °C) (Cat 320, 323 Excavator Operation and Maintenance Manual M0068104-12)

    Filter and ground-level dipstick are behind the right side access door; filler and upper dipstick under the engine service door on top.

    Oil carries soot and heat out of the C7.1; dust and summer heat age it fast, so change it on the hour and keep up the S·O·S samples the longer interval depends on.

Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.

Service capacities

Fuel tank
345 L86.6 gal
Cooling system
25 L6.6 gal
Engine oil
25 L6.6 gal
Swing drive (each)
6 L1.6 gal
Final drive (each)
5 L1.3 gal
Hydraulic system, with tank
234 L61.8 gal
Hydraulic tank
115 L30.4 gal

Service intervals

Engine oil and filter
1,000 hours
Fuel filters
1,000 hours
Swing drive oil
1,000 hours
Final drive oil
2,000 hours
Hydraulic return filter
3,000 hours
Hydraulic oil
6,000 hours
Coolant
12,000 hours
Boom and stick linkage grease
500 hours
Bucket linkage grease
100 hours

Compare the Cat 320

The machines nearest in size, each drawn beside this one at the same scale.

Moving a Cat 320

A first look from the sheet. Your haulier or forwarder confirms the load.

Length
9.53m
Width
2.98m
Height
2.96m
Weight
21.3t
  • RoadA 3 or 4-axle lowbed
  • Width2.98 m wide: over 2.6 m usually needs an oversize permit and escort
  • SeaA 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge

Cat 320 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

About the Cat 320

The Cat 320 is a 21.3-tonne excavator with a Cat C7.1 engine rated at 117 kW (157 hp).

It digs to 6.72 m, reaches 9.86 m, dumps at up to 6.49 m and works a 1.19 m³ bucket.

For transport it measures 9.53 m long and 2.98 m wide, and its tank holds 345 L of fuel.

A crawler excavator: a digging arm and bucket on a cab that turns all the way round, on tracks for grip and stability.

Typical jobs: digging foundations and trenches, loading dump trucks, demolition with a breaker, lifting pipes into trenches.

Cat 320 questions

How much does it cost to rent a Cat 320 in the UAE?

Cat 320 listings for hire on EquipmentsFinder ask AED 800 to AED 1,500 a day, AED 1,050 in the middle of 4 priced listings. Weekly and monthly hire usually costs less per day.

How much does a Cat 320 weigh?

21,300 kg (47,000 lb) in working order, with fuel, operator and standard attachment.

What engine and horsepower does the Cat 320 have?

A Cat C7.1 engine rated at 117 kW (157 hp) net.

How deep can a Cat 320 dig?

The Cat 320 digs to 6.72 m (22 ft) with the standard boom and arm.

What is the Cat 320's maximum reach?

Its reach at ground level is 9.86 m (32.3 ft).

What size bucket does the Cat 320 take?

1.19 m³ (1.56 yd³) is the bucket the maker quotes its figures with; other sizes fit.

What are the Cat 320's dimensions?

9.53 m long, 2.98 m wide and 2.96 m high, from Cat's dimension drawing.

How do you transport a Cat 320?

Road: a 3 or 4-axle lowbed. Width: 2.98 m wide: over 2.6 m usually needs an oversize permit and escort. Sea: a 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge.

What is the Cat 320's fuel tank capacity?

345 L (86.6 gal).

How much oil does a Cat 320 take?

Engine oil: 25 L (6.6 gal). Hydraulic oil: 234 L (61.8 gal).

How often does a Cat 320 need an oil change?

Cat sets the engine oil and filter at every 1,000 hours; in hot, dusty work, check the operator's manual for a shorter interval.

What are the Cat 320's main competitors?

The machines nearest it in size are the Hyundai HX220S, the Komatsu PC200, the Volvo EC210. Each has a side-by-side comparison on EquipmentsFinder.

Is the Cat 320 sold in the UAE?

Yes. The Cat 320 is sold in the UAE and the Gulf, the USA, other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Cat 320 used for?

A crawler excavator: a digging arm and bucket on a cab that turns all the way round, on tracks for grip and stability. Typical jobs: digging foundations and trenches, loading dump trucks, demolition with a breaker, lifting pipes into trenches.

Need a Cat 320 on site?

Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.