EF Logo

Cat 320 vs John Deere 210 P-Tier

The John Deere 210 P-Tier is the heavier machine, at 23.2 t against 21.3 t, and the John Deere 210 P-Tier has more power (119 kW against 117 kW).

The Cat 320 is ahead on: digs deeper, reaches further, bigger bucket or body, faster, turns tighter. The John Deere 210 P-Tier is ahead on: more power, dumps higher, more digging or pushing force, bigger fuel tank, narrower to transport, lower to transport.

Below, every figure both makers publish sits side by side, with the Cat 320 and the John Deere 210 P-Tier drawn to the same scale from their dimension drawings.

  1. Cat 320, side view

    Cat · excavator

    Cat 320

    Full specsPDF

  2. John Deere 210 P-Tier, side view

    John Deere · excavator

    John Deere 210 P-Tier

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat 320John Deere 210 P-Tier
Operating weight21,300 kg23,247 kg
Net powerHigher is better117 kW119 kW+2%
Max digging depthHigher is better6.72 m+1%6.67 m
Max reach at ground levelHigher is better9.86 m+1%9.75 m
Max dumping heightHigher is better6.49 m7.18 m+11%
Bucket capacityHigher is better1.19 m³+31%0.91 m³
Bucket digging forceHigher is better150 kN158 kN+5%
Fuel tankHigher is better345 L403 L+17%
Top speedHigher is better5.7 km/h+4%5.5 km/h
Tail swing radiusLower is better2.83 m+2%2.89 m
Overall width of upperstructureLower is better2.78 m2.71 m+3%
Overall height (to top of cab)Lower is better2.96 m2.95 m
Overall length9.53 m9.66 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall height (to top of cab)2.96 m2.95 m
Overall height (to top of boom)3.16 mWith boom/stick/bucket installed3.01 m
Overall length9.53 m9.66 m
Overall width of upperstructure2.78 mUpperframe width2.71 m
Tail swing radius2.83 m2.89 mPrinted as rear-end length / swing radius
Ground clearance, counterweight1.05 m1.03 m
Ground clearance (minimum)0.47 m0.45 m
Track length4.45 m4.47 mPrinted as undercarriage length
Ground contact length3.65 m3.66 mPrinted as distance between idler and sprocket centreline
Track gauge2.38 m2.39 m
Overall width2.98 m3.09 mWith 700 mm shoes; 2.99 m with 600 mm, 3.19 m with 800 mm
Shoe width0.6 m0.7 mTriple semi-grouser shoes, 600, 700 or 800 mm; 700 mm shown

Performance

Max digging depth6.72 m6.67 m
Max reach at ground level9.86 m9.75 m
Max digging height9.37 m10.04 mPrinted as maximum cutting height
Max dumping height6.49 m7.18 m
Max depth cut for 2,440 mm level bottom6.55 m6.5 m2.44 m flat bottom
Max vertical wall digging depth5.19 m5.99 m
Bucket capacity1.19 m³HD bucket0.91 m³1,065 mm (42 in) general-purpose bucket, SAE heaped
Bucket digging force150 kN158 kNISO, with power boost; SAE 141 kN (31,698 lbf)
Arm digging force106 kN114 kNISO, 2.91 m arm; SAE 110 kN (24,729 lbf)
Swing speed11.3 r/min13.3 rpm
Max swing torque82 kN·m68,900 Nm
Top speed5.7 km/hMaximum travel speed5.5 km/h
Max drawbar pull205 kN20,700 kgfTurtle mode

Weight

Operating weight21,300 kg23,247 kg700 mm shoes, standard counterweight and boom, 0.91 m3 bucket, 2.91 m arm, full fuel tank, 79 kg operator. 600 mm: 22,857 kg; 800 mm: 23,560 kg; with heavy counterweight and HD boom: 23,557 / 23,947 / 24,260 kg for 600 / 700 / 800 mm
Counterweight3,700 kgOperating-weight configuration4,250 kgStandard; heavy counterweight 4,850 kg
Ground pressure44.3 kPa600 mm triple grouser shoes, operating-weight configuration39.3 kPa700 mm shoes, standard counterweight; 600 mm 44.4 kPa, 800 mm 34.4 kPa

Engine

Engine modelCat C7.1John Deere PowerTech PVS 6.8L (6068HT106)
EmissionsMeets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIAEPA Final Tier 4 / EU Stage IV
Cylinders6Inline; from Cat's C7.1 industrial engine page6
Net power117 kW (157 hp)ISO 9249, at 1,800 rpm119 kW (159 hp)ISO 9249, at 2,000 rpm
Bore105 mm106 mmest.Estimate: bore of Deere's PowerTech PVS 6.8L (6068) engine family, from the 6068HFC08 PVS spec sheet; the excavator sheet does not print it
Stroke135 mm127 mmest.Estimate: stroke of Deere's PowerTech PVS 6.8L (6068) engine family, from the 6068HFC08 PVS spec sheet; the excavator sheet does not print it
Displacement7 L6.8 L

Hydraulics

Pump flow429 L/minMain system, maximum flow2 x 212 L/minTwo variable-displacement axial-piston pumps, open-centre load-sensing
Max pressure35 000 kPaEquipment343 barImplement circuit, 34,300 kPa
Max pressure, travel34 300 kPa355 bar35,500 kPa
Max pressure, swing27 500 kPa333 bar33,300 kPa
Arm cylinderbore 140 mm x stroke 1,504 mm135 mm bore, 95 mm rod, 1,475 mm stroke
Bucket cylinderbore 120 mm x stroke 1,104 mm115 mm bore, 80 mm rod, 1,060 mm stroke

Undercarriage

Track rollers (each side)88
Carrier rollers (each side)22
Track shoes (each side)4949Triple semi-grouser

Service capacities

Fuel tank345 L403 L
Cooling system25 L35.4 L
Engine oil, with filter25 L20.8 LWith filter
Swing drive6 L6.2 L
Final drive (each)5 L7.8 L
Hydraulic system, with tank234 L240 L
Hydraulic tank115 L135 L

Sources: Cat 320 Hydraulic Excavator (Tier 3) brochure AEXQ2332-09 (2024, build 07G) · John Deere 210 P-Tier excavator spec sheet (ME210PAU)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m
Cat 320John Deere 210 P-TierSame scale, front edges and ground lined up.

Cat 320 vs John Deere 210 P-Tier: questions

Which is bigger, the Cat 320 or John Deere 210 P-Tier?

By operating weight the John Deere 210 P-Tier is the biggest at 23.2 t, then the Cat 320 at 21.3 t.

Which has more power, the Cat 320 or John Deere 210 P-Tier?

The John Deere 210 P-Tier: Cat 320 117 kW (157 hp), John Deere 210 P-Tier 119 kW (159 hp) (net power), a 2% difference.

Which digs deeper, the Cat 320 or John Deere 210 P-Tier?

The Cat 320: Cat 320 6.72 m, John Deere 210 P-Tier 6.67 m (max digging depth), a 1% difference.

Which reaches further, the Cat 320 or John Deere 210 P-Tier?

The Cat 320: Cat 320 9.86 m, John Deere 210 P-Tier 9.75 m (max reach at ground level), a 1% difference.

Which has the bigger bucket, the Cat 320 or John Deere 210 P-Tier?

The Cat 320: Cat 320 1.19 m³, John Deere 210 P-Tier 0.91 m³ (bucket capacity), a 31% difference.

Which has the bigger fuel tank, the Cat 320 or John Deere 210 P-Tier?

The John Deere 210 P-Tier: Cat 320 345 L, John Deere 210 P-Tier 403 L (fuel tank), a 17% difference.

Which turns tighter, the Cat 320 or John Deere 210 P-Tier?

The Cat 320: Cat 320 2.83 m, John Deere 210 P-Tier 2.89 m (tail swing radius), a 2% difference.

Which is narrower to transport, the Cat 320 or John Deere 210 P-Tier?

The John Deere 210 P-Tier: Cat 320 2.78 m, John Deere 210 P-Tier 2.71 m (overall width of upperstructure), a 3% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.