EF Logo

excavatormade by John DeereUAE, Global

John Deere 350 P-TierSpecs, weight and dimensions

Weight
36.7 t
36,734 kg
Dig depth
8.18 m
Est. new price
AED 1.21M-1.73M

Quick answer

The John Deere 350 P-Tier is a 36.7-tonne excavator with a John Deere PowerTech PSS 9.0 L engine rated at 202 kW (271 hp). It digs to 8.18 m, reaches 11.67 m, dumps at up to 7.63 m and works a 1.76 m³ bucket. It suits digging foundations and trenches and loading dump trucks. Its rivals include the Cat 336 (37.5 t) and the Komatsu PC360LC-11 (36.5 t).

John Deere 350 P-Tier (illustration)

How much does a John Deere 350 P-Tier weigh?

The John Deere 350 P-Tier weighs 36.7 tonnes (36,734 kg, 80,985 lb) in working order, with fuel, operator and standard attachment. That is 2% lighter than the Cat 336 (37.5 t) and 1% heavier than the Komatsu PC360LC-11 (36.5 t). It puts 50.1 kPa of pressure on the ground. The figures are from John Deere 350 P-Tier excavator spec sheet (ME350PAU).

What engine is in the John Deere 350 P-Tier?

The John Deere 350 P-Tier has a John Deere PowerTech PSS 9.0 L engine rated at 202 kW (271 hp) net, ISO 9249, at 1,900 rpm. It displaces 9 L (549 in3). Emissions: EPA Final Tier 4 / EU Stage IV. The fuel tank holds 628 L (166 gal) and the engine takes 27 L (7.2 gal) of oil.

How deep can a John Deere 350 P-Tier dig?

The John Deere 350 P-Tier digs to 8.18 m, reaches 11.67 m, dumps at up to 7.63 m and works a 1.76 m³ bucket. In imperial units the digging depth is 26' 10". The sheet notes: 7.38 m with the 3.2 m arm. On the same row of their sheets, the Cat 336 shows 7.51 m and the Komatsu PC360LC-11 shows 7.38 m.

What are the John Deere 350 P-Tier dimensions?

The John Deere 350 P-Tier is 11.29 m (37 ft) long, 3.39 m (11 ft 1 in) wide and 3.14 m (10 ft 4 in) high. As it stands it is too big for the door of a standard shipping container. The Cat 336 is 11.17 m long, 3.34 m wide and 3.18 m high.

John Deere 350 P-Tier vs Cat 336: what is the difference?

The John Deere 350 P-Tier is 2% lighter than the Cat 336: 36.7 t against 37.5 t. The John Deere 350 P-Tier digs deeper (8.18 m against 7.51 m), reaches further (11.67 m against 11.06 m) and dumps higher (7.63 m against 7.08 m). Both sets of figures are the makers’ own, for the builds on our sheets.

John Deere 350 P-Tier vs Cat 336, every figure

These figures are for the 350 P-Tier. The 350G LC is not covered here and has figures of its own, so check the serial plate before using these for one.

John Deere 350 P-Tier dimensions

John Deere 350 P-Tier, side view with dimensions (illustration)3.14 m4.05 m11.3 m
Side view
John Deere 350 P-Tier, front view (illustration)3.39 m
Front view
Overall height
3.14 m
Track on ground
4.05 m
Overall length
11.3 m
Overall width
3.39 m

Illustration; figures from the maker's sheet.

How big is the John Deere 350 P-Tier?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

John Deere 350 P-Tier drawn to scale beside a person, a pickup truck and a 40 ft container. The John Deere 350 P-Tier is 11.29 m long - 93% of a forty-foot container's length - and 3.14 m tall, 1.8 times a person's height.John Deere 350 P-Tier11.29 × 3.14 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The John Deere 350 P-Tier is 11.29 m long - 93% of a forty-foot container's length - and 3.14 m tall, 1.8 times a person's height.

John Deere 350 P-Tier specifications

Figures are the maker's unless marked: est. is our estimate, and any figure from another site names it. Each links to where it came from. Sheet last updated 17 November 2026.

64 figures in 8 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length11.29 m4.0 m arm; 11.20 m with the 3.2 m arm[1] p.8
Overall height (to top of boom)3.6 m4.0 m arm; 3.27 m with the 3.2 m arm[1] p.8
Tail swing radius3.6 mPrinted as rear-end length / swing radius[1] p.8
Track length on ground4.05 mPrinted as distance between idler and sprocket centreline[1] p.8
Track length4.94 mPrinted as undercarriage length[1] p.8
Ground clearance, counterweight1.18 m[1] p.8
Dimensions, part 2 of 2
FigureValue (metric)Source
Overall width of upperstructure2.99 m[1] p.8
Overall height (to top of cab)3.14 m[1] p.8
Shoe width0.8 mTriple semi-grouser shoes, 700 or 800 mm; 800 mm shown[1] p.8
Track gauge2.59 m[1] p.8
Ground clearance (minimum)0.5 m[1] p.8
Overall width3.39 mWith 800 mm shoes; 3.29 m with 700 mm[1] p.8

Working range

Working range, part 1 of 2
FigureValue (metric)Source
Max digging reach11.86 m6.4 m boom, 4.0 m arm; 11.10 m with the 3.2 m arm[1] p.7
Max reach at ground level11.67 m10.89 m with the 3.2 m arm[1] p.7
Max digging depth8.18 m7.38 m with the 3.2 m arm[1] p.7
Max digging depth (8' level)8.04 m2.44 m flat bottom; 7.21 m with the 3.2 m arm[1] p.7
Working range, part 2 of 2
FigureValue (metric)Source
Max digging height10.75 mPrinted as maximum cutting height; 10.36 m with the 3.2 m arm[1] p.7
Max dumping height7.63 m7.24 m with the 3.2 m arm[1] p.7
Min swing radius4.47 m4.46 m with the 3.2 m arm[1] p.7
Max vertical wall digging depth7.27 m6.42 m with the 3.2 m arm[1] p.7

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Operating weight36,734 kg800 mm shoes, 6.4 m boom, 4.0 m arm, 1.76 m3 HD bucket, standard counterweight, full fuel tank, 79 kg operator[1] p.7
Counterweight6,928 kg[1] p.7
Ground pressure50.1 kPa800 mm triple semi-grouser shoes[1] p.7
Undercarriage weight12,750 kgWith 800 mm triple semi-grouser shoes[1] p.7
Weight, part 2 of 2
FigureValue (metric)Source
Boom weight3,080 kg6.4 m one-piece boom with arm cylinder[1] p.7
Arm weight1,985 kg4.0 m arm with bucket cylinder and linkage; 3.2 m arm 1,802 kg[1] p.7
Boom cylinders weight624 kgPair of boom-lift cylinders[1] p.7
Bucket weight1,532 kg1,372 mm HD bucket[1] p.7

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Bucket capacity1.76 m³1,372 mm (54 in) heavy-duty bucket[1] p.7
Bucket digging force246 kNISO, with power boost; SAE 225.2 kN (50,628 lbf) with the 4.0 m arm[1] p.7
Arm digging force159 kNISO, 4.0 m arm; SAE 152.6 kN (34,314 lbf). 3.2 m arm: 185 kN ISO / 177 kN SAE[1] p.7
Swing speed10.7 rpm[1] p.7
Max swing torque120,000 Nm[1] p.7
Performance, part 2 of 2
FigureValue (metric)Source
Travel speed (high)5 km/h[1] p.6
Travel speed (low)3.2 km/h[1] p.6
Max drawbar pull30,350 kgf[1] p.6
Off-level capacity35°70% slope[1] p.6

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelJohn Deere PowerTech PSS 9.0 L[1] p.6
EmissionsEPA Final Tier 4 / EU Stage IV[1] p.6
Cylinders6[1] p.6
Displacement9 L[1] p.6
Bore118 mmest.Estimate: bore of Deere's PowerTech PSS 9.0L (6090) engine family, from the 6090HFC09 PSS spec sheet; the excavator sheet does not print it[3]
Engine, part 2 of 2
FigureValue (metric)Source
Stroke136 mmest.Estimate: stroke of Deere's PowerTech PSS 9.0L (6090) engine family, from the 6090HFC09 PSS spec sheet; the excavator sheet does not print it[3]
Net power202 kW (271 hp)ISO 9249, at 1,900 rpm[1] p.6
AspirationSeries turbocharged, air-to-air charge-air cooler[1] p.6
CoolingElectric on-demand fans; reversing electric variable-speed fan drive optional with the debris package[1] p.6

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Pump flow2 x 288 L/minTwo variable-displacement pumps, open-centre, pilot controlled[1] p.6
Max pressure343 barImplement circuit, 34,300 kPa[1] p.6
Max pressure, power boost380 bar38,000 kPa[1] p.6
Max pressure, travel355 bar35,500 kPa[1] p.6
Max pressure, swing333 bar33,300 kPa[1] p.6
Hydraulics, part 2 of 2
FigureValue (metric)Source
Pilot pump flow30 L/minGear pump, setting 3,900 kPa (566 psi)[1] p.6
Boom cylinders (2)145 mm bore, 100 mm rod, 1,520 mm stroke[1] p.6
Arm cylinder170 mm bore, 115 mm rod, 1,740 mm stroke[1] p.6
Bucket cylinder140 mm bore, 95 mm rod, 1,250 mm strokeMass-excavating (ME) bucket: 145 mm bore, 95 mm rod, 1,250 mm stroke[1] p.6

Undercarriage

Undercarriage, part 1 of 2
FigureValue (metric)Source
Track rollers (each side)8[1] p.6
Carrier rollers (each side)2[1] p.6
Track shoes (each side)48Triple semi-grouser[1] p.6
Undercarriage, part 2 of 2
FigureValue (metric)Source
Track guides3 per side[1] p.6
Track adjustmentHydraulic[1] p.6
Track chainSealed and lubricated[1] p.6

Electrical

Electrical
FigureValue (metric)Source
Batteries2 x 12 V, 1,400 CCA[1] p.6
Alternator300 A[1] p.6
Work lights2 halogen (one on boom, one on frame)[1] p.6

Build: John Deere 350 P-Tier (the 35 t excavator that replaced the 350G LC), figures from Deere's 350 P-Tier spec sheet ME350PAU for the 6.4 m one-piece boom, 4.0 m arm, 1.76 m3 heavy-duty bucket, 800 mm triple semi-grouser shoes and standard 6,928 kg counterweight. Engine is the Final Tier 4 / Stage IV PowerTech PSS 9.0 L.

  1. [1]John Deere 350 P-Tier excavator spec sheet (ME350PAU)
  2. [2]John Deere 350G LC spec sheet, Spanish (previous generation, used only to record differences)
  3. [3]John Deere 6090HFC09 PowerTech PSS 9.0L engine spec sheet (deere.ca) - 6090 engine family bore and stroke

John Deere 350 P-Tier service

What each system holds and when John Deere says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
628 L166 gal
Cooling system
39.7 L10.5 gal
Engine oil
27 L7.2 gal
Swing drive
11.8 L12.5 qt
Final drive (each)
8.5 L9.0 qt
Pump drive
1.1 L1.2 qt
Hydraulic system, with tank
290 L77 gal
Hydraulic tank
193 L51 gal
DEF tank
35 L9.3 gal

John Deere 350 P-Tier against its rivals

The excavators nearest in weight from other makers, figure by figure, each shown at the same scale.

John Deere 350 P-Tier, Cat 336, Komatsu PC360LC-11, SANY SY365H: specifications side by side
FigureJohn Deere 350 P-Tierthis pageCat 336 specsKomatsu PC360LC-11 specsSANY SY365H specs
Operating weight36,734 kg37,500 kg36,490 kg36,000 kg
Net power202 kW (271 hp)223.5 kW (300 hp)192 kW (257 HP)not on its sheet
Max digging depth8.18 m7.51 m7.38 m7.05 m
Max digging reach11.86 mnot on its sheet11.1 m10.78 m
Max dumping height7.63 m7.08 m7.11 m6.92 m
Bucket capacity1.76 m³2.12 m³1.8 m³1.6 m³
Bucket digging force246 kN210 kN200 kN235 kN
Pump flownot on its sheet560 L/min535 L/minnot on its sheet
Fuel tank628 L600 L605 L690 L
Every figureFull sheetJohn Deere 350 P-Tier vs Cat 336

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the John Deere 350 P-Tier if you need a deeper dig (8.18 m), longer reach (11.86 m) and a higher dump (7.63 m).
  • Pick the Cat 336 if you need more power (223.5 kW), a bigger bucket (2.12 m³) and more hydraulic flow (560 L/min).
  • Pick the SANY SY365H if you need a bigger fuel tank (690 L).

John Deere 350 P-Tier prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new John Deere 350 P-Tier costs about AED 1,210,000 to AED 1,725,000, base machine before options, freight and tax - an estimate from published estimates, checked November 2026. Sources: equipbook.ai, deere.com.

No John Deere 350 P-Tier is listed in the UAE on EquipmentsFinder right now. The prices below are for all excavators, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 28

AED 1,225 /day

No priced John Deere 350 P-Tier for hire yet: this is all excavators

Low AED 800High AED 1,800

No John Deere 350 P-Tier for rent listed right now.

Request a John Deere 350 P-Tier

Who is asking for excavators in the UAE

Contractors posted 48 requests for excavators on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (28), Abu Dhabi (11) and Fujairah (3). Requests name a kind of machine, not a model, so this counts every excavator, the John Deere 350 P-Tier among them.

Requests, last 12 months
48
For Dubai
28
For Abu Dhabi
11
  • 20 Ton Wheel Excavator Required For Purchase19 November 2026
  • 20 ton Tracked excavator pre-fitted with hydraulic vibratory roller Required For RentAbu Dhabi / 17 November 2026
  • 85 Ton Excavator with 26m Boom Required For RentDubai / 16 November 2026

Open excavator requests on the Inquiry BoardPost a request for a John Deere 350 P-Tier

Does a John Deere 350 P-Tier fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the John Deere 350 P-Tier is 3.39 m wide against a 2.34 m door opening and 3.14 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
11.29 m
Width
3.39 m
Height
3.14 m
Weight
36.7 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a John Deere 350 P-Tier

For the people who run one: codes, charts and calculators that fit an excavator.

Same class: 40 ton excavators

40 ton excavators with an operating weight of 35 to 45 t, lightest first. The John Deere 350 P-Tier is 4 of 12; every figure is the maker's.

  1. 1Hitachi ZX35035.2 t
  2. 2SANY SY365H36 t
  3. 3Komatsu PC360LC-1136.5 t
  4. 4John Deere 350 P-TierThis page36.7 t
  5. 5Cat 33637.5 t
  6. 6Kobelco SK350LC-1138.2 t
  7. 7Cat 34039.1 t
  8. 8Volvo EC38039.2 t
  9. 9Develon DX380LC-7K40.2 t

Showing 1 to 9 of 12, the machines nearest the John Deere 350 P-Tier by operating weight.

Popular John Deere excavator models

John Deere 350 P-Tier fault codes and serial number

All John Deere fault codesFind the year from a John Deere serial number

More John Deere 350 P-Tier questions

How much horsepower does the John Deere 350 P-Tier have?

271 hp (202 kW) net, ISO 9249, at 1,900 rpm.

What size bucket does a John Deere 350 P-Tier take?

1.76 m³ (2.3 yd3) is the bucket the maker quotes its figures with; other sizes fit.

How far can a John Deere 350 P-Tier reach?

Its maximum reach at ground level is 11.67 m (38' 3"), 10.89 m with the 3.2 m arm.

How tall is a John Deere 350 P-Tier?

3.14 m (10 ft 4 in) overall.

How wide is a John Deere 350 P-Tier?

3.39 m (11 ft 1 in) overall.

How high can a John Deere 350 P-Tier dig?

Its maximum digging height is 10.75 m (35' 3").

What is the tail swing radius of a John Deere 350 P-Tier?

3.6 m (11' 10").

What is the hydraulic flow of a John Deere 350 P-Tier?

2 x 288 L/min.

What are the John Deere 350 P-Tier's main competitors?

The machines nearest it in size are the Komatsu PC360LC-11, the SANY SY365H and the Cat 336. Each has a side-by-side comparison on EquipmentsFinder.

Is the John Deere 350 P-Tier sold in the UAE?

Yes. The John Deere 350 P-Tier is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a John Deere 350 P-Tier used for?

A crawler excavator: a digging arm and bucket on a cab that turns all the way round, on tracks for grip and stability. Typical jobs: digging foundations and trenches, loading dump trucks, demolition with a breaker, lifting pipes into trenches.

Embed this spec card

The John Deere 350 P-Tier's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/john-deere-350g" title="John Deere 350 P-Tier specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/john-deere-350g">John Deere 350 P-Tier specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a John Deere 350 P-Tier on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.