EF Logo

Cat · Event codes

Cat Fault Code E361

High engine coolant temperature

What does Cat code E361 mean?

The engine ECM saw the coolant too hot. At the first level the lamp and alarm come on, at higher levels the ECM derates engine power by one percent per second. Urgency: stop now - shut down and fix before working on. Check first: check for active diagnostic codes first, such as 110-3 or 110-4.

FaultStopE361Cat · Event codes

Can I keep running with it?

Stop now

Shut down and fix before working on. Running on risks damage or the machine locks out.

What should I check first?

Check for active diagnostic codes first, such as 110-3 or 110-4.

Then 5 more checks
Code shows hereFAULTE361

Where this code shows

Turn the key on and check the cluster or monitor for a warning lamp.

Checks

0 of 6 done

Causes

  • Low coolant level or leak
  • Blocked radiator or aftercooler
  • Fan, belt or tensioner fault
  • Air in the cooling system
1 more cause
  • Faulty coolant temperature sensor

How it failed

You'll notice: A warning lamp and alarm come on, then the engine loses power gradually as the derate takes hold.

OtherRead from how the source describes the code

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Engine sensors and sensor supply

Source

TM 5-3805-298-23-1 Field Maintenance Manual, 924H Wheel Loader, troubleshooting tables (E361)

This source lists E361 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Cat 924H wheel loader with C6.6 engine (engine ECM), per the 924H field maintenance manual; the same CID-FMI scheme is used on other Cat machines with C-series ECMs.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.