Cat 930K specs
- bucket capacity
- 2.5 m³
- net power
- 116 kW (156 hp)
- operating weight
- 13,130 kg
- static tipping load (full turn)
- 7,871 kg
Cat 930K dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| 1 | Height to top of cab | 3.34 m10'11" |
| 2 | Height to top of beacon | 3.707 m12'2" |
| 3 | Ground to axle centre | 0.685 m2'3" |
| 4 | Ground clearance | 0.397 m1'4" |
| 5 | Overall length (bucket on ground) | 7.613 m25'0" |
| 6 | Rear axle to rear bumper | 1.993 m6'6" |
| 7 | Hitch to front axle | 1.5 m4'11" |
| 8 | Wheelbase | 3 m9'10" |
| 9 | Dump clearance at max lift | 2.761 m9'1" |
| 10 | Load-over height | 3.331 m10'11" |
| 11 | Clearance, level bucket at max lift | 3.58 m11'9" |
| 12 | Hinge pin height (max lift) | 3.907 m12'10" |
| 13 | Overall height, bucket at max lift | 5.239 m17'2" |
| 14 | Reach at max lift | 1.109 m3'8" |
| 15 | Carry height, bucket pin | 0.41 m1'4" |
| 16 | Dig depth | 0.1 m3.9" |
| 17 | Bucket width | 2.55 m8'4" |
| 18 | Tread width | 1.93 m6'4" |
| 20 | Width over tyres | 2.54 m8'4" |
| 19 | Turning radius (outside of bucket) | 5.961 m19'7" |
| 21 | Turning radius (outside of tyres) | 5.402 m17'9" |
| 22 | Turning radius (inside of tyres) | 2.851 m9'4" |
Cat 930K specifications
Cat 930K for Africa / Middle East and other non-Tier-4 regions (C7.1, U.S. EPA Tier 3 / EU Stage IIIA / Brazil MAR-1 equivalent), standard lift, 2.5 m³ GP bucket - the build Al-Bahar sells in the UAE; the newer Tier 4 / Stage V 930 (no suffix) is not covered.
33 figures in 7 groups
Angles
- Rack angle at full lift
- 54°
- Dump angle at full lift
- 48°
- Rack angle at carry
- 44°
- Departure angle
- 33°
- Articulation angle
- 40°
Weight
- Operating weight
- 13,130 kg
Engine
- Engine model
- Cat C7.1
- Emissions
- U.S. EPA Tier 3 / EU Stage IIIA / Brazil MAR-1 equivalent
- Displacement
- 7 L
- Gross power
- 119 kW (160 hp)
- Gross power (Standard Mode)
- 113 kW (152 hp)
- Net power
- 116 kW (156 hp)SAE J1349, Performance Mode at 1,800 rpm
- Net power (Standard Mode)
- 110 kW (148 hp)SAE J1349, Standard Mode at 1,600 rpm
- Max torque
- 787 NmGross, ISO 14396, Performance Mode
- Max torque (net)
- 753 NmNet, SAE J1349, Performance Mode
Performance
- Bucket capacity
- 2.5 m³
- Bucket capacity range (general purpose)
- 2.1-2.7 m³ (2.7-3.5 yd³)
- Bucket capacity range (light material)
- 3.1-5.0 m³ (4.0-6.5 yd³)
- Static tipping load (straight)
- 9,202 kgISO 14397-1; standard lift
- Static tipping load (full turn)
- 7,871 kgISO 14397-1; standard lift
- Breakout force
- 11,488 kgf
- Top speed
- 40 km/hRange 4, forward and reverse
Hydraulics
- Pump flow
- 190 L/minImplement pump, maximum flow
- Max pressure
- 250 bar
- Tilt cylinder relief pressure
- 280 bar
- Steering pump flow
- 130 L/minMaximum flow
- Steering pump pressure
- 241 bar
Transmission
- Transmission
- Hydrostatic, 4 speed ranges, electronic control
- Range 1
- 13 km/h
- Range 2
- 13 km/h
- Range 3
- 27 km/h
- Range 4
- 40 km/h
Tyres
- Tyres
- 20.5 R25 radial (L-3)
Cat 930K service
What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine crankcase
- 19.5 L
- Engine oil and filter, change every
- 500 hours
Fluid: Cat DEO-ULS SAE 15W-40 (rated -10 to 50 °C) (Cat Machine Fluids Recommendations SEBU6250-30 (Dec 2020))
Oil carries heat and grit out of the engine; a loader idling and digging in Gulf heat and dust wears its oil faster than the hour meter suggests, so change it on time and sample it.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 195 L51.5 US gal
- Cooling system
- 32 L8.5 US gal
- Engine crankcase
- 19.5 L5.2 US gal
- Transmission
- 8.5 L2.2 US gal
- Axles, front
- 26 L6.9 US gal
- Axles, rear
- 25 L6.6 US gal
- Hydraulic system, with tank
- 165 L43.6 US gal
- Hydraulic tank
- 90 L23.8 US gal
Service intervals
- Engine oil and filter
- 500 hours
- Fuel filters
- 500 hours
- Engine air filter
- 1,000 hours
- Hydraulic oil filter
- 2,000 hours
- Transmission oil and filter
- 2,000 hours
- Differential oil (front and rear)
- 2,000 hours
- Hydraulic oil
- 6,000 hours
- Coolant extender
- 6,000 hours
- Coolant
- 12,000 hours
Compare the Cat 930K
The machines nearest in size, each drawn beside this one at the same scale.
Moving a Cat 930K
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 7.61m
- Width
- 2.54m
- Height
- 3.34m
- Weight
- 13.1t
- RoadA beavertail or flatbed truck
- SeaA 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge
Cat 930K prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 18
AED 1,150 /day
No priced Cat 930K for hire yet: this is all wheel loaders
About the Cat 930K
The Cat 930K is a 13.1-tonne wheel loader with a Cat C7.1 engine rated at 116 kW (156 hp).
It carries a 2.5 m³ bucket, has a full-turn tipping load of 7,871 kg and dumps with 2.761 m clearance.
For transport it measures 7.613 m long and 2.54 m wide, and its tank holds 195 L of fuel.
A wheel loader: a big bucket on two lift arms at the front of an articulated, wheeled machine that loads, carries and stockpiles material.
Typical jobs: loading trucks from stockpiles, moving sand, aggregate and soil around site, feeding crushers and batching plants, clearing and backfilling.
Cat 930K questions
How much does a Cat 930K weigh?
13,130 kg (28,945 lb) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the Cat 930K have?
A Cat C7.1 engine rated at 116 kW (156 hp) net.
What bucket size does the Cat 930K have?
2.5 m³ (3.27 yd³), the bucket Cat quotes it with.
What is the Cat 930K's tipping load?
7,871 kg (17,353 lb) at full turn: the safe load is about half of it.
What are the Cat 930K's dimensions?
7.61 m long, 2.54 m wide and 3.34 m high, from Cat's dimension drawing.
How do you transport a Cat 930K?
Road: a beavertail or flatbed truck. Sea: a 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge.
What is the Cat 930K's fuel tank capacity?
195 L (51.5 US gal).
How much oil does a Cat 930K take?
Engine oil: 500 hours. Hydraulic oil: 165 L (43.6 US gal).
How often does a Cat 930K need an oil change?
Cat sets the engine oil and filter at every 500 hours; in hot, dusty work, check the operator's manual for a shorter interval.
What are the Cat 930K's main competitors?
The machines nearest it in size are the Hitachi ZW140-7, the SANY SW940L, the Volvo L90H. Each has a side-by-side comparison on EquipmentsFinder.
Is the Cat 930K sold in the UAE?
Yes. The Cat 930K is sold in the UAE and the Gulf, the USA, other markets worldwide; builds can differ by market, so check emissions and options with the dealer.
What is a Cat 930K used for?
A wheel loader: a big bucket on two lift arms at the front of an articulated, wheeled machine that loads, carries and stockpiles material. Typical jobs: loading trucks from stockpiles, moving sand, aggregate and soil around site, feeding crushers and batching plants, clearing and backfilling.
Need a Cat 930K on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
