J1939 · Aftertreatment - DPF
SPN 3251 Fault Code
Aftertreatment 1 diesel particulate filter differential pressure
What does SPN 3251 mean?
Pressure drop across the DPF, read by a differential pressure sensor with taps before and after the filter. The ECM uses it to estimate soot load and request regeneration. How urgent it is depends on the FMI after SPN 3251 - pick it below. Check first: with the engine off, read the differential pressure: it should be near zero, and a large reading means a sensor or circuit fault.
- SPN 3251
- Aftertreatment 1 diesel particulate filter differential pressure
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 3251 - pick it below.
What should I check first?
With the engine off, read the differential pressure: it should be near zero, and a large reading means a sensor or circuit fault
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 3251?
You'll notice: The ECM cannot read soot load, so regeneration timing is wrong and the filter can load up, with the DPF lamp on and power cut back when pressure readings are false.
Find the number shown after SPN 3251 on your display. 7 of them have their own page with causes and checks.
- 0SPN 3251 FMI 0: Value is above the normal range, most severe levelReal conditionCummins ISX15, Detroit DD15, Detroit DD13, Detroit DD13 Gen 5 and 4 more
- 1SPN 3251 FMI 1: DPF pressure is out of range lowReal conditionDetroit DD15
- 2SPN 3251 FMI 2: Data is erratic, intermittent or incorrectErratic or implausibleCummins ISX15, Detroit DD15, Mack MP8, Mack MP7 and 1 more
- 3SPN 3251 FMI 3: Signal voltage is above normal, or the circuit is shorted to a high sourceShorted highCummins ISX15, Mack MP8, Mack MP7, Volvo D13
- 4SPN 3251 FMI 4: Signal voltage is below normal, or the circuit is shorted to a low sourceShorted lowCummins ISX15
- 5SPN 3251 FMI 5: Current is below normal, or the circuit is openOpen circuitMack MP8, Mack MP7, Volvo D13
- 10SPN 3251 FMI 10: The value is changing at an abnormal rateErratic or implausibleCummins ISX15
- 15SPN 3251 FMI 15: Value is above the normal range, least severe levelReal conditionCummins ISX15
- 16SPN 3251 FMI 16: Value is above the normal range, moderately severe levelReal conditionCummins ISX15, Mack MP8, Mack MP7, Volvo D13
- 20SPN 3251 FMI 20: DOC inlet pressure is not plausibleErratic or implausibleDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
- 21SPN 3251 FMI 21: DOC inlet or outlet pressure is not plausibleErratic or implausibleDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
Checks
0 of 5 done
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
How urgent SPN 3251 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- Signal high or open: broken or backed-out pin, an open sensor return, or the signal shorted to the 5 V reference at the DPF differential pressure sensor
- Signal low or shorted: signal wire grounded, or the 5 V reference lost, so the DPF differential pressure sensor reads at the bottom of its range
- Real condition: real soot loading from failed regenerations or a short-trip duty cycle
- Real condition: hose or tap fault, blockage or exhaust leak giving false pressure
1 more causeFewer causes
- Sensor: soot or condensate in a pressure hose making the reading pulse
Other Aftertreatment - DPF codes
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list names SPN 3251 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
