EF Logo

J1939 · Aftertreatment - DPF

SPN 3251 FMI 0

DPF differential pressure high, most severe

What does SPN 3251 FMI 0 mean?

The pressure drop across the DPF is far above the limit, the most severe level. The filter is badly plugged with soot or ash and the engine will derate until it is cleaned. Urgency: stop now - shut down and fix before working on. Check first: read soot load, ash load and differential pressure against engine speed in the service tool.

FaultStopSPN 3251FMI 0J1939 engine ECU
FMI 0
Data above normal, most severe

Can I keep running with it?

Stop now

Shut down and fix before working on. Running on risks damage or the machine locks out.

What should I check first?

Read soot load, ash load and differential pressure against engine speed in the service tool

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Checks

0 of 5 done

Causes

  • Filter plugged with soot or ash after failed or skipped regenerations
  • Doser or injector fault so regeneration never reached temperature
  • Delta-P hose or sensor fault giving a false high reading
  • Exhaust restriction after the filter, such as a crushed pipe or silencer

How it failed

You'll notice: The pressure drop across the DPF is far above the limit, the most severe level.

Real conditionRead from FMI 0: data above normal, most severe

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list shows SPN 3251 with FMI 0. The guidance on this page is general, not taken from it.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.