EF Logo

J1939 · Aftertreatment - DPF

SPN 3251 FMI 2

DPF differential pressure erratic

What does SPN 3251 FMI 2 mean?

The DPF differential pressure sensor data jumps around or disagrees with related readings, so the ECM flags it erratic. Urgency: check soon - the machine may derate or limit a function. Check first: log the DPF differential pressure sensor reading over a short run; spikes or dropouts with no change in the machine point to wiring or the sensor.

FaultCheckSPN 3251FMI 2J1939 engine ECU

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Log the DPF differential pressure sensor reading over a short run; spikes or dropouts with no change in the machine point to wiring or the sensor

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Checks

0 of 5 done

Causes

  • Terminal fretting inside the DPF differential pressure sensor plug breaking contact intermittently
  • Broken inner strands in the DPF differential pressure sensor wire, which open and close as the harness flexes
  • Soot or condensate in a pressure hose making the reading pulse
  • Hose fitting loose and moving with the exhaust pulses

How it failed

You'll notice: The ECM cannot read soot load, so regeneration timing is wrong and the filter can load up, with the DPF lamp on and power cut back when pressure readings are false.

Erratic or implausibleRead from FMI 2: erratic or incorrect data

The reading jumps, drifts or disagrees with the sensors around it.

allowed rangetime
The reading against the band the controller allows.
Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good result
A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list shows SPN 3251 with FMI 2. The guidance on this page is general, not taken from it.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.